Contact us to receive an offer.
| Manufacturer | Torwegge-Weinig |
|---|---|
| Model | H292 -H22 BL with saws |
| Year | |
| Location | Austria
|
This listing features a Torwegge-Weinig H292 - H22 BL with saws, a high-performance industrial woodworking machine designed for the production of top layers and finish layers in wood processing. The machine is part of a continuous production line capable of handling various wood types including fir (FI), spruce (KI), larch (LÄ), Douglas fir (DG), and pine (ZI). It supports lamella widths ranging from 60 to 140 mm and thicknesses between 8 and 15 mm, with strip widths from 25 to 45 mm and thicknesses from 17 to 31 mm. Carpet widths can vary from 1273 to 2073 mm, with special widths available at 1000 and 1700 mm. The target performance per shift is approximately 300 m² for LH and 500 m² for 19 to 31 mm fir wood.
The functional principle is continuous, with a maximum workpiece length of 10,000 mm, width of 6600 mm, and thickness up to 45 mm. The pressing force is rated at 10 tons, with minimum workpiece thickness of 25 mm and minimum inlet length of 450 mm. The machine includes a joint gluing press.
The Weinig Hydromat 22 BL profile machine, integrated within this system, was built in 1995 and includes a splitting unit with lamella saws. It features automatic feed and pull-out units, a safety hood, and a soundproof cabin for operator protection. The planing capacity is 220 x 120 mm, with a feeding speed range of 8 to 80 m/min powered by an 18.5 kW motor. The spindle layout includes bottom-right-left and top-bottom configurations with rigid tables; some spindles are prepared but not specified.
The splitting unit has one right and one left spindle, each with 30 kW power at 4500 rpm, including table rollers, sliding rollers, spray devices, and a riving knife discharge. A four-roller pull-out system and special pressure components are incorporated to facilitate cover layer lamella production. The machine is equipped with an infeed allocator for lamellas and an outfeed belt.
Visually, the machine shows some dust and signs of wear but remains generally intact. It has a green-painted metal frame with multiple metal rollers for material handling. Safety features include a red safety guard on the left side and red safety railings around elevated platforms. The conveyor system includes red rollers, and several electric motors are mounted on top. Hydraulic or pneumatic tubing and control levers are present for operational adjustments.
This equipment is suitable for industrial wood processing environments requiring continuous, automated production of laminated wood layers with integrated planing and splitting capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TOP LAYERS TORWEGGE PRODUCTION LINE with WEINIG H22BL
FINSIH LAYER PRODUCTION LINE
ML presses Torwegge
heating bed length 3 m
Wood types FI, KI, LÄ, DG, ZI
ML lamella width 60 - 140 mm
ML lamella thickness 8 - 15 mm
Strip width 25-45
Strip thickness 17-31 mm
possible Carpet widths 1273 - 2073 mm
Special widths 1000, 1700 mm
Target performance/shift 300 m² LH 500 m² 19 - 31 mm Fi
Functional principle continuous
Board length mm 10000
Board width mm 6600
Workpiece thickness max mm 45
Pressing force t 10
Additional technical data
Workpiece thickness min mm 25
Inlet length min mm 450
Joint gluing press Yes
Some of the technical data are estimated. Actual values may
vary.
=== German ===
Technical data are partly estimated. Actual values may ...
WEINIG high-performance automatic profile machine, type Hydromat 22 BL
built in 1995 with splitting unit (lamella saw)
feeding (automatic feed and pull-out unit!)
With safety hood and soundproof cabin!
Machine specifications:
- Planing capacity 220 x 120 mm
- Feeding, 8-80 m/min, motor 18.5 kW
Spindle layout:
bottom-right-left
top - bottom, table rigid
Below, rigid table, spindle prepared
Above - below, rigid table, spindle prepared
Splitting unit consists of 1 right and
1 left spindle each 30 kW
(4500 rpm)
including table roller, sliding roller, spray device and riving knife discharge
4 roller pull-out
special pressure and built-in components for the production of cover layer lamellas
infeed (allocator) for lamellas and outfeed belt
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 72 |
| Last activity | Nov. 7, 2026 |
TOP LAYERS TORWEGGE PRODUCTION LINE with WEINIG H22BL
FINSIH LAYER PRODUCTION LINE
ML presses Torwegge
heating bed length 3 m
Wood types FI, KI, LÄ, DG, ZI
ML lamella width 60 - 140 mm
ML lamella thickness 8 - 15 mm
Strip width 25-45
Strip thickness 17-31 mm
possible Carpet widths 1273 - 2073 mm
Special widths 1000, 1700 mm
Target performance/shift 300 m² LH 500 m² 19 - 31 mm Fi
Functional principle continuous
Board length mm 10000
Board width mm 6600
Workpiece thickness max mm 45
Pressing force t 10
Additional technical data
Workpiece thickness min mm 25
Inlet length min mm 450
Joint gluing press Yes
Some of the technical data are estimated. Actual values may
vary.
=== German ===
Technical data are partly estimated. Actual values may ...
WEINIG high-performance automatic profile machine, type Hydromat 22 BL
built in 1995 with splitting unit (lamella saw)
feeding (automatic feed and pull-out unit!)
With safety hood and soundproof cabin!
Machine specifications:
- Planing capacity 220 x 120 mm
- Feeding, 8-80 m/min, motor 18.5 kW
Spindle layout:
bottom-right-left
top - bottom, table rigid
Below, rigid table, spindle prepared
Above - below, rigid table, spindle prepared
Splitting unit consists of 1 right and
1 left spindle each 30 kW
(4500 rpm)
including table roller, sliding roller, spray device and riving knife discharge
4 roller pull-out
special pressure and built-in components for the production of cover layer lamellas
infeed (allocator) for lamellas and outfeed belt
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Torwegge-Weinig H292 - H22 BL with saws, a high-performance industrial woodworking machine designed for the production of top layers and finish layers in wood processing. The machine is part of a continuous production line capable of handling various wood types including fir (FI), spruce (KI), larch (LÄ), Douglas fir (DG), and pine (ZI). It supports lamella widths ranging from 60 to 140 mm and thicknesses between 8 and 15 mm, with strip widths from 25 to 45 mm and thicknesses from 17 to 31 mm. Carpet widths can vary from 1273 to 2073 mm, with special widths available at 1000 and 1700 mm. The target performance per shift is approximately 300 m² for LH and 500 m² for 19 to 31 mm fir wood.
The functional principle is continuous, with a maximum workpiece length of 10,000 mm, width of 6600 mm, and thickness up to 45 mm. The pressing force is rated at 10 tons, with minimum workpiece thickness of 25 mm and minimum inlet length of 450 mm. The machine includes a joint gluing press.
The Weinig Hydromat 22 BL profile machine, integrated within this system, was built in 1995 and includes a splitting unit with lamella saws. It features automatic feed and pull-out units, a safety hood, and a soundproof cabin for operator protection. The planing capacity is 220 x 120 mm, with a feeding speed range of 8 to 80 m/min powered by an 18.5 kW motor. The spindle layout includes bottom-right-left and top-bottom configurations with rigid tables; some spindles are prepared but not specified.
The splitting unit has one right and one left spindle, each with 30 kW power at 4500 rpm, including table rollers, sliding rollers, spray devices, and a riving knife discharge. A four-roller pull-out system and special pressure components are incorporated to facilitate cover layer lamella production. The machine is equipped with an infeed allocator for lamellas and an outfeed belt.
Visually, the machine shows some dust and signs of wear but remains generally intact. It has a green-painted metal frame with multiple metal rollers for material handling. Safety features include a red safety guard on the left side and red safety railings around elevated platforms. The conveyor system includes red rollers, and several electric motors are mounted on top. Hydraulic or pneumatic tubing and control levers are present for operational adjustments.
This equipment is suitable for industrial wood processing environments requiring continuous, automated production of laminated wood layers with integrated planing and splitting capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 72 |
| Last activity | Nov. 7, 2026 |
Използвана сгъваема машина Torwegge-Weinig H292 -H22 BL с триони
Použitý skládací stroj Torwegge-Weinig H292 -H22 BL s pilami
Brugt Torwegge-Weinig H292 -H22 BL med savfoldemaskine
Gebrauchte Torwegge-Weinig H292 -H22 BL mit Sägen Abkantmaschine
Μεταχειρισμένο Torwegge-Weinig H292 -H22 BL με πριόνια πτυσσόμενο μηχάνημα
Used Torwegge-Weinig H292 -H22 BL with saws folding machine
Plegadora usada Torwegge-Weinig H292 -H22 BL con sierras
Torwegge-Weinig H292 -H22 BL d'occasion avec scie plieuse
Rabljeni stroj za savijanje Torwegge-Weinig H292 -H22 BL s pilama
Használt Torwegge-Weinig H292 -H22 BL fűrészekkel hajtogató gép
Piegatrice Torwegge-Weinig H292 -H22 BL con sega
Naudota "Torwegge-Weinig H292 -H22 BL" su pjūklais lankstymo mašina
Gebruikte Torwegge-Weinig H292 -H22 BL met zaagvouwmachine
Używana składarka Torwegge-Weinig H292 -H22 BL z piłami
Usado Torwegge-Weinig H292 -H22 BL com serras máquina de dobrar
Folosit Torwegge-Weinig H292 -H22 BL cu ferăstraie mașină de pliere
Фальцевальная машина Torwegge-Weinig H292 -H22 BL с пилами
Polovna mašina za savijanje Torwegge-Weinig H292 -H22 BL sa testerama
Begagnad Torwegge-Weinig H292 -H22 BL med sågar vikmaskin
Kullanılmış Torwegge-Weinig H292 -H22 BL testereli katlama makinesi
EN
- Languages
English (GB)