Price on request
Make an offerContact us to receive an offer.
| Manufacturer | Termetal |
|---|---|
| Model | 150 kW |
| Year | 2011 |
| Location | Poland
|
| Category | Foundry furnaces |
| Product id | P231019178 |
| Language |
Пещ Termetal 150 kW
Pec Termetal 150 kW
Ovn Termetal 150 kW
Termetal 150 kW Schmelzofen
Κάμινος Termetal 150 kW
Termetal 150 kW Furnace
Horno por inducción Termetal 150 kW
Four Termetal 150 kW
Peć Termetal 150 kW
Termetal 150 kW Kemence
Fornace Termetal 150 kW
Krosnis Termetal 150 kW
Termetal 150 kW Oven
Piec Termetal 150 kW
Forno Termetal 150 kW
Cuptor Termetal 150 kW
Termetal 150 kW Печь
Peć Termetal 150 kW
Termetal 150 kW Ugn
Fırın Termetal 150 kW
|
| Engine Power | 150 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/01/2026 |
The Termetal 150 kW compact induction heater, manufactured in 2011, is designed specifically for heating rectangular steel blocks prior to die forging. It features an induction generator with a power rating of 150 kW and operates at a frequency of approximately 2 to 3 kHz. The heater is suitable for steel blocks with a cross-section of 30 x 60 mm and a maximum length of 200 mm, with a nominal operating temperature reaching up to 1300°C. Its heating capacity is rated at 300 kg per hour.
The machine is powered by a 3-phase 400 V, 50 Hz power supply, with a current input of around 245 A. It has a power supply capacity of 180 kVA. The cooling system is designed to consume approximately 93 liters per minute (or 5 m³ per hour) of water, with specific water quality parameters recommended for pH (7 to 8.5), hardness (150 to 300 ppm), chlorides (less than 150 ppm), and conductivity (below 0.5 mS). The cooling water temperature should be maintained between 12 and 30 °C, with a pressure range of 0.3 to 0.5 MPa.
The physical dimensions of the heater are approximately 1000 mm in width, 3500 mm in length, and 1800 mm in height, and it weighs about 1800 kg. The machine is housed in a green metal enclosure with two front doors and features a control panel equipped with buttons and switches located on the left side. A transparent window on the front panel allows viewing inside the heater. Pneumatic components and tubing are mounted on the top left side, and a motor or pump is mounted on the back side of the unit.
The heater shows signs of use, with some dirt and wear visible on its surfaces. It includes operation and maintenance documentation, along with a technical manual that describes the external cooling circuit components, sensors for temperature and flow control, and safety features for overheating protection.
This Termetal induction heater is intended for industrial applications requiring precise and efficient heating of steel blocks before forging processes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Termetal 150kW compact heater with an inductor
The heater is intended for heating rectangular steel blocks before die forging
Operation and Maintenance Documentation
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this Termetal 150 kW furnace manufactured?
This Termetal 150 kW furnace was manufactured in 2011.
What is the power rating of this equipment?
This equipment has a power rating of 150 kW.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 5 |
| Last activity | March 13, 2026 |
Termetal 150kW compact heater with an inductor
The heater is intended for heating rectangular steel blocks before die forging
Operation and Maintenance Documentation
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this Termetal 150 kW furnace manufactured?
This Termetal 150 kW furnace was manufactured in 2011.
What is the power rating of this equipment?
This equipment has a power rating of 150 kW.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Engine Power | 150 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 05/01/2026 |
The Termetal 150 kW compact induction heater, manufactured in 2011, is designed specifically for heating rectangular steel blocks prior to die forging. It features an induction generator with a power rating of 150 kW and operates at a frequency of approximately 2 to 3 kHz. The heater is suitable for steel blocks with a cross-section of 30 x 60 mm and a maximum length of 200 mm, with a nominal operating temperature reaching up to 1300°C. Its heating capacity is rated at 300 kg per hour.
The machine is powered by a 3-phase 400 V, 50 Hz power supply, with a current input of around 245 A. It has a power supply capacity of 180 kVA. The cooling system is designed to consume approximately 93 liters per minute (or 5 m³ per hour) of water, with specific water quality parameters recommended for pH (7 to 8.5), hardness (150 to 300 ppm), chlorides (less than 150 ppm), and conductivity (below 0.5 mS). The cooling water temperature should be maintained between 12 and 30 °C, with a pressure range of 0.3 to 0.5 MPa.
The physical dimensions of the heater are approximately 1000 mm in width, 3500 mm in length, and 1800 mm in height, and it weighs about 1800 kg. The machine is housed in a green metal enclosure with two front doors and features a control panel equipped with buttons and switches located on the left side. A transparent window on the front panel allows viewing inside the heater. Pneumatic components and tubing are mounted on the top left side, and a motor or pump is mounted on the back side of the unit.
The heater shows signs of use, with some dirt and wear visible on its surfaces. It includes operation and maintenance documentation, along with a technical manual that describes the external cooling circuit components, sensors for temperature and flow control, and safety features for overheating protection.
This Termetal induction heater is intended for industrial applications requiring precise and efficient heating of steel blocks before forging processes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 5 |
| Last activity | March 13, 2026 |
EN
- Languages
English (GB)