Contact us to receive an offer.
| Manufacturer | Tecnosystem |
|---|---|
| Model | D3-CM |
| Year | |
| Location | Spain
|
Overview: Tecnosystem D3-CM high-speed EDM drilling unit suitable for drilling electrically conductive materials using rotating tubular electrodes (brass or copper). The machine is equipped with a FAGOR 3-Axis NV 300E coordinate display and is offered in used/as-is condition.
Key specifications (provided):
- Manufacturer / Model: Tecnosystem D3-CM
- Motion travels: X 350 mm, Y 250 mm, Z 350 mm
- Table dimensions: 600 x 300 mm
- Machine weight: 800 kg
- Maximum recommended workpiece weight: 200 kg
Components and accessories (as observed):
- Control console mounted at the right of the column with keypad and display
- Transparent polycarbonate splash guard surrounding the working area
- Worktable fitted with multiple T-slots and several rectangular fixturing blocks clamped in place
- Handwheel and X/Y table feed handles on the front of the table assembly
- Emergency stop (red mushroom) and green ON / black OFF push buttons on the front panel
- Adjustable gooseneck work light mounted near the control area
- Pressure gauge and adjacent pressure control knob with a ‘‘PRESSURE’’ legend on the control plate
- Multiple flexible hoses and corrugated protective cable conduits routed into the column and around the work area; additional hoses/coiled lines stored at the base
- Various safety/warning labels including a CE conformity sticker, a red ‘‘DANGER’’ label, and yellow electrical hazard stickers on enclosures
Condition notes:
The machine shows signs of use. Surface wear, paint chipping, and light rust are present on cabinet edges and lower panels. The worktable surface has staining and discoloration consistent with prior use. The base appears mounted on thin metal shims; there is minor debris around the floor area. Prospective buyers should inspect these condition items onsite.
Applications / recommended use:
Intended for high-speed EDM drilling tasks such as creating starter holes for wire EDM, drilling small cooling/ejection holes in molds and dies, and removing broken taps, as an auxiliary machine in machining shops.
This description only reports documented specifications and observed components/condition; no claims are made about operational status or recent testing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Listing Title: Tecnosystem D3-CM High-Speed Electrical Discharge Machining (EDM) Drilling Machine
Brand: Tecnosystem
Model: D3-CM
Year of Manufacture: Not specified
Condition: As-is, where-is
Technology: High-speed EDM drilling
Function: High-speed electric-arc drilling of conductive materials using rotating brass or copper tubular electrodes
Coordinate display: FAGOR 3-Axis NV 300E
X-axis travel: 350 mm
Y-axis travel: 250 mm
Z-axis travel: 350 mm
Spindle travel: 200 mm
Electrode rotation speed: 200 rpm
Table dimensions: 600 x 300 mm
Machine weight: 800 kg
Maximum workpiece weight: 200 kg
Dielectric capacity: 200 L
Drilling capacity: Drill/electrode diameters from 0.3 mm to 6.3 mm
Maximum electrode length: 400 mm
System: High-pressure dielectric fluid injection through the tubular electrode
Key applications: Drilling threading holes for wire EDM; removing broken taps/taps; small cooling or ejection holes in molds and dies
Recommended use: In machining shops, as auxiliary equipment for wire cutting to create starter holes
Machine condition: Used (as-is)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 97 |
| Last activity | Nov. 7, 2026 |
Listing Title: Tecnosystem D3-CM High-Speed Electrical Discharge Machining (EDM) Drilling Machine
Brand: Tecnosystem
Model: D3-CM
Year of Manufacture: Not specified
Condition: As-is, where-is
Technology: High-speed EDM drilling
Function: High-speed electric-arc drilling of conductive materials using rotating brass or copper tubular electrodes
Coordinate display: FAGOR 3-Axis NV 300E
X-axis travel: 350 mm
Y-axis travel: 250 mm
Z-axis travel: 350 mm
Spindle travel: 200 mm
Electrode rotation speed: 200 rpm
Table dimensions: 600 x 300 mm
Machine weight: 800 kg
Maximum workpiece weight: 200 kg
Dielectric capacity: 200 L
Drilling capacity: Drill/electrode diameters from 0.3 mm to 6.3 mm
Maximum electrode length: 400 mm
System: High-pressure dielectric fluid injection through the tubular electrode
Key applications: Drilling threading holes for wire EDM; removing broken taps/taps; small cooling or ejection holes in molds and dies
Recommended use: In machining shops, as auxiliary equipment for wire cutting to create starter holes
Machine condition: Used (as-is)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview: Tecnosystem D3-CM high-speed EDM drilling unit suitable for drilling electrically conductive materials using rotating tubular electrodes (brass or copper). The machine is equipped with a FAGOR 3-Axis NV 300E coordinate display and is offered in used/as-is condition.
Key specifications (provided):
- Manufacturer / Model: Tecnosystem D3-CM
- Motion travels: X 350 mm, Y 250 mm, Z 350 mm
- Table dimensions: 600 x 300 mm
- Machine weight: 800 kg
- Maximum recommended workpiece weight: 200 kg
Components and accessories (as observed):
- Control console mounted at the right of the column with keypad and display
- Transparent polycarbonate splash guard surrounding the working area
- Worktable fitted with multiple T-slots and several rectangular fixturing blocks clamped in place
- Handwheel and X/Y table feed handles on the front of the table assembly
- Emergency stop (red mushroom) and green ON / black OFF push buttons on the front panel
- Adjustable gooseneck work light mounted near the control area
- Pressure gauge and adjacent pressure control knob with a ‘‘PRESSURE’’ legend on the control plate
- Multiple flexible hoses and corrugated protective cable conduits routed into the column and around the work area; additional hoses/coiled lines stored at the base
- Various safety/warning labels including a CE conformity sticker, a red ‘‘DANGER’’ label, and yellow electrical hazard stickers on enclosures
Condition notes:
The machine shows signs of use. Surface wear, paint chipping, and light rust are present on cabinet edges and lower panels. The worktable surface has staining and discoloration consistent with prior use. The base appears mounted on thin metal shims; there is minor debris around the floor area. Prospective buyers should inspect these condition items onsite.
Applications / recommended use:
Intended for high-speed EDM drilling tasks such as creating starter holes for wire EDM, drilling small cooling/ejection holes in molds and dies, and removing broken taps, as an auxiliary machine in machining shops.
This description only reports documented specifications and observed components/condition; no claims are made about operational status or recent testing.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 97 |
| Last activity | Nov. 7, 2026 |
Потапяща електроерозийна машина Tecnosystem D3-CM
Hloubicí elektroerozivní stroj Tecnosystem D3-CM
Tecnosystem D3-CM Sænkgnistmaskine
Tecnosystem D3-CM Senkerodiermaschine
Μηχανές ηλεκτροδιάβρωσης βύθισης Tecnosystem D3-CM
Tecnosystem D3-CM Die-sinking EDM machine
Electroerosión por perforación rápida Tecnosystem D3-CM
Machine d’électroérosion par enfonçage Tecnosystem D3-CM
Elektroerozijski stroj za dubinsko erodiranje Tecnosystem D3-CM
Tecnosystem D3-CM Süllyesztékes szikraforgácsoló gépek
Macchine per elettroerosione a tuffo Tecnosystem D3-CM
Tecnosystem D3-CM Panardinamojo elektroerozinio apdirbimo staklės
Tecnosystem D3-CM Zinkvonkmachine
Drążarki elektroerozyjne wgłębne Tecnosystem D3-CM
Máquinas de eletroerosão por penetração Tecnosystem D3-CM
Mașini de electroeroziune prin penetrare Tecnosystem D3-CM
Tecnosystem D3-CM Копировально-прошивные электроэрозионные станки
Elektroeroziona mašina za potapanje Tecnosystem D3-CM
Tecnosystem D3-CM Sänkgnistmaskiner
Dalma tipi EDM makineleri Tecnosystem D3-CM
EN
- Languages
English (GB)