Contact us to receive an offer.
| Manufacturer | Technological unit of water pumps |
|---|---|
| Model | -- |
| Year | 2006 |
| Location | Czech Republic
|
This offering is a technological unit of water pumps housed within a white container structure. The container features two white doors equipped with safety and warning signs, ventilation grates, and circular vent openings to support airflow. The exterior shows some rust stains on edges and around vents and doors, indicating signs of weathering. The container is positioned on concrete pavement with some dirt marks.
Inside, the unit contains a large industrial pump system painted red, connected to piping and mechanical components. A pressure gauge is attached to the piping on the left side, accompanied by valve handles for control. There is also a red control panel or electrical box on the right side of the container's interior. The floor is covered with black non-slip matting, and the interior walls are white with some dirt marks near the floor.
The pump is identified as an SPP Pumps Limited model K151, with a rated capacity of 1500 liters per minute and a rated net pressure of 125 psi. It operates at a rated speed of 2952 rpm, with a maximum power requirement of 165 bhp and an impeller diameter of 10.62 inches. The number of stages is not clearly visible.
The engine powering the unit is a Clarke model TK6HNL50, manufactured in May 2006, delivering a gross power of 185 BHP (138 kW) at 2500 RPM. Its maximum allowable load is 166 BHP (124 kW) at 2950 RPM.
The unit was manufactured in 2006 and has recorded 70 engine hours. This setup is suitable for industrial pumping applications requiring robust and contained pump units.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
We offer a technological unit of a water pump with stable motors located in a container (2x motor with pumps). Everything is functional with 70 engine hours.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 7, 2026 |
We offer a technological unit of a water pump with stable motors located in a container (2x motor with pumps). Everything is functional with 70 engine hours.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This offering is a technological unit of water pumps housed within a white container structure. The container features two white doors equipped with safety and warning signs, ventilation grates, and circular vent openings to support airflow. The exterior shows some rust stains on edges and around vents and doors, indicating signs of weathering. The container is positioned on concrete pavement with some dirt marks.
Inside, the unit contains a large industrial pump system painted red, connected to piping and mechanical components. A pressure gauge is attached to the piping on the left side, accompanied by valve handles for control. There is also a red control panel or electrical box on the right side of the container's interior. The floor is covered with black non-slip matting, and the interior walls are white with some dirt marks near the floor.
The pump is identified as an SPP Pumps Limited model K151, with a rated capacity of 1500 liters per minute and a rated net pressure of 125 psi. It operates at a rated speed of 2952 rpm, with a maximum power requirement of 165 bhp and an impeller diameter of 10.62 inches. The number of stages is not clearly visible.
The engine powering the unit is a Clarke model TK6HNL50, manufactured in May 2006, delivering a gross power of 185 BHP (138 kW) at 2500 RPM. Its maximum allowable load is 166 BHP (124 kW) at 2950 RPM.
The unit was manufactured in 2006 and has recorded 70 engine hours. This setup is suitable for industrial pumping applications requiring robust and contained pump units.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 477 |
| Last activity | Nov. 7, 2026 |
Technological unit of water pumps --
Pumpa Technological unit of water pumps --
Technological unit of water pumps --
Technological unit of water pumps -- Pumpe
Technological unit of water pumps --
Technological unit of water pumps -- industrial pump
Bomba Technological unit of water pumps --
pompe industrielle Technological unit of water pumps --
Technological unit of water pumps --
Technological unit of water pumps --
Pompe Technological unit of water pumps --
Technological unit of water pumps --
Technological unit of water pumps --
Pompa Technological unit of water pumps --
Technological unit of water pumps --
Technological unit of water pumps --
Technological unit of water pumps -- Насосно-трубопроводная система
Technological unit of water pumps --
Technological unit of water pumps --
Endüstriyel pompa Technological unit of water pumps --
EN
- Languages
English (GB)