| Manufacturer | TCS |
|---|---|
| Model | 100TON |
| Year | |
| Location | Italy
|
| Category | Forging - Hydraulic presses |
| Power in tons | 100 T |
| Type | H-Frame |
| Table length | 1800 mm |
| Table width | 1400 mm |
| Distance between columns | 1500 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 28/10/2026 |
| Product id | P260723057 |
| Language |
Хидравлична преса TCS 100TON
Hydraulický lis TCS 100TON
TCS 100TON Hydraulisk presse
TCS 100TON Hydraulische Presse
Υδραυλική πρέσα TCS 100TON
TCS 100TON Hydraulic press
Prensa hidráulica TCS 100TON
Presse hydraulique TCS 100TON
Hidraulična preša TCS 100TON
TCS 100TON Hidraulikus prés
Pressa idraulica TCS 100TON
TCS 100TON Hidraulinis presas
TCS 100TON Hydraulische pers
Prasa hydrauliczna TCS 100TON
Prensa hidráulica TCS 100TON
Presă hidraulică TCS 100TON
TCS 100TON Гидравлический пресс
Hidraulična presa TCS 100TON
TCS 100TON Hydraulpress
Hidrolik pres TCS 100TON
|
Overview:
This listing is for a TCS model 100TON press intended for mold testing and classified under forging — hydraulic presses. The unit is described as a press suitable for applications where large platen sizes and substantial platen travel are required. The designation “100TON” is shown as the model identifier.
Key working-field specifications:
- Maximum distance between platens: 1500 mm (59.06 in)
- Platen size: 1800 x 1400 mm (70.87 x 55.12 in)
- Upper platen tilt: 180°
Intended use and capabilities:
The machine is presented for mold testing and forging-related press work. Its platen dimensions and 1500 mm maximum platen separation indicate it is designed to accommodate relatively large molds or workpieces. The 180° upper platen tilt specification indicates the upper platen can tilt through a full 180° range, which may be relevant for certain forming, alignment or mold-release operations.
Notes and important information:
- Brand: TCS; Model: 100TON. The listing identifies the unit type as a press for mold testing.
- The information above is taken from the product data provided with this listing. The data provided are based on the information available to us, where possible obtained from manufacturers; therefore, despite good faith, due to the nature and complexity of the goods, such data may be incomplete and/or inaccurate and in no case can their accuracy be guaranteed or constitute any contractual obligation. You are advised to inspect the equipment and request confirmation of any critical specifications before purchase.
No additional components, accessories, operational status or condition details are stated in the available information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
WORKING FIELD
Max distance between platens
1500 mm59.06 in
Platen size
1800X1400 mm70.87X55.12 in
Upper platen tilt
180°
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 181 |
| Last activity | Oct. 30, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
WORKING FIELD
Max distance between platens
1500 mm59.06 in
Platen size
1800X1400 mm70.87X55.12 in
Upper platen tilt
180°
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Hydraulic presses |
| Power in tons | 100 T |
| Type | H-Frame |
| Table length | 1800 mm |
| Table width | 1400 mm |
| Distance between columns | 1500 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 28/10/2026 |
| Product id | P260723057 |
| Language |
Хидравлична преса TCS 100TON
Hydraulický lis TCS 100TON
TCS 100TON Hydraulisk presse
TCS 100TON Hydraulische Presse
Υδραυλική πρέσα TCS 100TON
TCS 100TON Hydraulic press
Prensa hidráulica TCS 100TON
Presse hydraulique TCS 100TON
Hidraulična preša TCS 100TON
TCS 100TON Hidraulikus prés
Pressa idraulica TCS 100TON
TCS 100TON Hidraulinis presas
TCS 100TON Hydraulische pers
Prasa hydrauliczna TCS 100TON
Prensa hidráulica TCS 100TON
Presă hidraulică TCS 100TON
TCS 100TON Гидравлический пресс
Hidraulična presa TCS 100TON
TCS 100TON Hydraulpress
Hidrolik pres TCS 100TON
|
Overview:
This listing is for a TCS model 100TON press intended for mold testing and classified under forging — hydraulic presses. The unit is described as a press suitable for applications where large platen sizes and substantial platen travel are required. The designation “100TON” is shown as the model identifier.
Key working-field specifications:
- Maximum distance between platens: 1500 mm (59.06 in)
- Platen size: 1800 x 1400 mm (70.87 x 55.12 in)
- Upper platen tilt: 180°
Intended use and capabilities:
The machine is presented for mold testing and forging-related press work. Its platen dimensions and 1500 mm maximum platen separation indicate it is designed to accommodate relatively large molds or workpieces. The 180° upper platen tilt specification indicates the upper platen can tilt through a full 180° range, which may be relevant for certain forming, alignment or mold-release operations.
Notes and important information:
- Brand: TCS; Model: 100TON. The listing identifies the unit type as a press for mold testing.
- The information above is taken from the product data provided with this listing. The data provided are based on the information available to us, where possible obtained from manufacturers; therefore, despite good faith, due to the nature and complexity of the goods, such data may be incomplete and/or inaccurate and in no case can their accuracy be guaranteed or constitute any contractual obligation. You are advised to inspect the equipment and request confirmation of any critical specifications before purchase.
No additional components, accessories, operational status or condition details are stated in the available information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 181 |
| Last activity | Oct. 30, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
EN
- Languages
English (GB)