Contact us to receive an offer.
| Manufacturer | Tacchella |
|---|---|
| Model | 612 U |
| Year | 1980 |
| Location | Italy
|
The Tacchella 612 U is a cylindrical grinding machine designed for external and internal grinding tasks. Manufactured in 1980, this robust machine has a maximum grinding length of 600 mm and can accommodate workpieces with a maximum swing diameter of 120 mm. Weighing approximately 1500 kg, it is a substantial piece of industrial equipment suitable for precise grinding operations.
The machine features a front panel equipped with two large yellow handwheels that facilitate manual operation. The control panel includes various knobs and a lever, allowing for fine adjustments during the grinding process. Additional controls such as a rotary knob and a red button are located on the left side, providing further operational control.
The grinding wheel is mounted inside a protective cover to enhance safety during use. The machine also includes a workpiece spindle and tailstock, enabling secure holding and rotation of the workpiece. There is a flexible hose connected near the grinding wheel area, which may be part of the machine's cooling or dust extraction system. A metal pipe or conduit is attached to the machine base, possibly for structural support or fluid management.
Cosmetically, the machine shows signs of wear consistent with its age and use, including noticeable paint chipping and surface wear on various parts, such as the control panel and surrounding areas. A power cable is connected to the machine, indicating it is set up for electrical operation.
This Tacchella 612 U grinding machine is suitable for users looking for a capable cylindrical grinder with a significant grinding length and swing capacity. The visible wear does not provide information about its operational condition; therefore, potential buyers should consider this when evaluating the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used Tacchella 612 U Cylindrical External/Internal Grinding Machine
Manufacturer: Tacchella
Model: 612 U
Year of Manufacture: 1980
Technical Condition: Good
State: Visible
Weight: 1500.0 kg
Max. Grinding Length: 600.0 mm
Exter: Yes
Max. Swing Diameter: 120.0 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 33 |
| Last activity | Oct. 30, 2026 |
Used Tacchella 612 U Cylindrical External/Internal Grinding Machine
Manufacturer: Tacchella
Model: 612 U
Year of Manufacture: 1980
Technical Condition: Good
State: Visible
Weight: 1500.0 kg
Max. Grinding Length: 600.0 mm
Exter: Yes
Max. Swing Diameter: 120.0 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Tacchella 612 U is a cylindrical grinding machine designed for external and internal grinding tasks. Manufactured in 1980, this robust machine has a maximum grinding length of 600 mm and can accommodate workpieces with a maximum swing diameter of 120 mm. Weighing approximately 1500 kg, it is a substantial piece of industrial equipment suitable for precise grinding operations.
The machine features a front panel equipped with two large yellow handwheels that facilitate manual operation. The control panel includes various knobs and a lever, allowing for fine adjustments during the grinding process. Additional controls such as a rotary knob and a red button are located on the left side, providing further operational control.
The grinding wheel is mounted inside a protective cover to enhance safety during use. The machine also includes a workpiece spindle and tailstock, enabling secure holding and rotation of the workpiece. There is a flexible hose connected near the grinding wheel area, which may be part of the machine's cooling or dust extraction system. A metal pipe or conduit is attached to the machine base, possibly for structural support or fluid management.
Cosmetically, the machine shows signs of wear consistent with its age and use, including noticeable paint chipping and surface wear on various parts, such as the control panel and surrounding areas. A power cable is connected to the machine, indicating it is set up for electrical operation.
This Tacchella 612 U grinding machine is suitable for users looking for a capable cylindrical grinder with a significant grinding length and swing capacity. The visible wear does not provide information about its operational condition; therefore, potential buyers should consider this when evaluating the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 33 |
| Last activity | Oct. 30, 2026 |
Tacchella 612 U
Hrotová bruska vnější / vnitřní Tacchella 612 U
Tacchella 612 U
Tacchella 612 U Rundschleifmaschine
Tacchella 612 U
Used Tacchella 612 U Cylindrical external / internal grinding machine
Rectificadora cilíndrica Tacchella 612 U
Rectifieuse cylindrique Tacchella 612 U
Tacchella 612 U
Tacchella 612 U
Rettifica cilindrica usata Tacchella 612 U
Tacchella 612 U
Tacchella 612 U
Szlifierka do wałków/otworów Tacchella 612 U
Tacchella 612 U
Tacchella 612 U
Tacchella 612 U Круглошлифовальный станок
Tacchella 612 U
Tacchella 612 U
Silindirik taşlama makinesi Tacchella 612 U
EN
- Languages
English (GB)