| Manufacturer | SW |
|---|---|
| Model | BA 40 |
| Year | 2001 |
| Location | Germany
|
Machine: SW BA 40 vertical machining centre (3-axis), manufactured 2001. This is a large, fully enclosed machining centre from SW designed for heavy-duty vertical machining applications.
Key specifications (from seller data):
- X travel: 1300 mm
- Y travel: 630 mm
- Z travel: 630 mm
- Table size: 1275 x 630 mm
- Maximum spindle speed: 7,500 rpm
- Spindle motor power: 36 kW
- Required footprint (L x W x H): 7700 x 3700 x 4000 mm
Included components and features (as listed and observed):
- Full enclosure with three front access doors fitted with transparent viewing panels
- Vertical spindle head with a tool magazine mounted on the head
- T-slotted worktable with multiple longitudinal T-slots for fixturing
- Two rotary/chuck attachments mounted on the table
- Toolholder racks with multiple toolholders and fixtures stored alongside the machine
- Coolant/work area flushing system and flush guns are indicated in the machine specification
- Tool breakage monitoring (Leutze) and an extraction system by GEA-Delbag are listed in the specification
- Tool taper / holder type listed as SK 50 (DIN 69871, Form B)
- Electrical cabinets and cooling/ventilation units mounted at the machine rear
- Pumps/motors and filter housings at the machine base, plus mounted hydraulic/pneumatic components
- Overhead cable tray and interior inspection lighting
- Floppy disk drive listed in the specification
Condition notes (observed and reported):
- Exterior panels show light grime and marks consistent with workshop use
- Interior surfaces, including the spindle housing, show coolant staining and wear marks
- Worktable surface shows machining marks and some chip residue in troughs; a chip trough/gutter is present along the front edge
- Ceiling filter panels and some interior panels are discolored from use
- A coiled air hose is mounted on the front/right side of the machine
Optional equipment (listed by seller): extended hydraulics for workpiece clamping, valve systems for double-acting clamping cylinders, adaptations for angle drill heads, automatic loading doors, reversible clamping device and clamping bridge. (Quantities and pressures from the original list are not restated here.)
No statements are made about current operational condition, testing, or warranty. All technical specifications and listed equipment are taken from the provided machine data and observable components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis SW BA 40 vertical machining centre was manufactured in 2001. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 630 mm, and Z-axis travel of 630 mm. The machine is equipped with a powerful spindle speed range of 20 - 7,500 rpm and a tool magazine with 60 slots. If you are looking to get high-quality machining capabilities, consider the SW BA 40 machine we have for sale. Contact us for further details.- X-Axis Travel: 2 x 1300 mm (3350 mm in long-bed operation)
- Y-Axis Travel: 630 mm
- Z-Axis Travel: 630 mm
- Clamping Surface (Pendulum Operation): 2 x 1275 x 630 mm
- Rapid Traverse X/Y/Z: 40 m/min
- Feed Rate: 1 - 40,000 mm/min
- Spindle Diameter: 100 mm
- Spindle Speed: 20 - 7,500 rpm
- Spindle Power: 36 kW (at 25% ED)
- Spindle Torque: 950 Nm (at 25% ED)
- Tool Taper / Holder: SK 50 DIN 69871, Form B
- Tool Magazine Slots: 60
- Max Tool Diameter (Free Neighboring Slots): 110 mm (250 mm)
- Max Tool Weight: 8 kg (24 kg)
- Measuring System: Linear
- NC Rotary Table: Peiseler ATU 280 with counter-bearing
- Coolant Pressure (Internal): 40 bar
- Coolant Cleaning: Gap filter
- Work Area Flushing: Yes
- Flush Guns: 2
- Tool Breakage Monitoring: Leutze
- Enclosure: Full enclosure
- Extraction System: GEA-Delbag, 2 x KNAW 1-1-AF
- Floppy Disk Drive: Yes
- Required Footprint (L x W x H): 7700 x 3700 x 4000 mm
- Foundation Required: No
- Nominal Service Voltage: 3/PE AC 400V / 50Hz
- Nominal Working Current: 87 A
- Total Connected Load: 50 kVA (60 kVA rated capacity)
- Supply Line Fusing: 100 A
- Working Hours: 63,368 h
- Optional Equipment: Extended machine hydraulics for workpiece clamping, valve system for double-acting clamping cylinders, 2 clamping circuits in left work area, 2 clamping circuits in right work area, clamping pressure 250 bar / Q=9 l/min, adaptation for angle drill heads (without 4-point support), automatic loading doors, approx. 60 SK50 chucks, 1x double angle head, reversible clamping device (A-axis and counter-holder), clamping bridge
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2059 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis SW BA 40 vertical machining centre was manufactured in 2001. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 630 mm, and Z-axis travel of 630 mm. The machine is equipped with a powerful spindle speed range of 20 - 7,500 rpm and a tool magazine with 60 slots. If you are looking to get high-quality machining capabilities, consider the SW BA 40 machine we have for sale. Contact us for further details.- X-Axis Travel: 2 x 1300 mm (3350 mm in long-bed operation)
- Y-Axis Travel: 630 mm
- Z-Axis Travel: 630 mm
- Clamping Surface (Pendulum Operation): 2 x 1275 x 630 mm
- Rapid Traverse X/Y/Z: 40 m/min
- Feed Rate: 1 - 40,000 mm/min
- Spindle Diameter: 100 mm
- Spindle Speed: 20 - 7,500 rpm
- Spindle Power: 36 kW (at 25% ED)
- Spindle Torque: 950 Nm (at 25% ED)
- Tool Taper / Holder: SK 50 DIN 69871, Form B
- Tool Magazine Slots: 60
- Max Tool Diameter (Free Neighboring Slots): 110 mm (250 mm)
- Max Tool Weight: 8 kg (24 kg)
- Measuring System: Linear
- NC Rotary Table: Peiseler ATU 280 with counter-bearing
- Coolant Pressure (Internal): 40 bar
- Coolant Cleaning: Gap filter
- Work Area Flushing: Yes
- Flush Guns: 2
- Tool Breakage Monitoring: Leutze
- Enclosure: Full enclosure
- Extraction System: GEA-Delbag, 2 x KNAW 1-1-AF
- Floppy Disk Drive: Yes
- Required Footprint (L x W x H): 7700 x 3700 x 4000 mm
- Foundation Required: No
- Nominal Service Voltage: 3/PE AC 400V / 50Hz
- Nominal Working Current: 87 A
- Total Connected Load: 50 kVA (60 kVA rated capacity)
- Supply Line Fusing: 100 A
- Working Hours: 63,368 h
- Optional Equipment: Extended machine hydraulics for workpiece clamping, valve system for double-acting clamping cylinders, 2 clamping circuits in left work area, 2 clamping circuits in right work area, clamping pressure 250 bar / Q=9 l/min, adaptation for angle drill heads (without 4-point support), automatic loading doors, approx. 60 SK50 chucks, 1x double angle head, reversible clamping device (A-axis and counter-holder), clamping bridge
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine: SW BA 40 vertical machining centre (3-axis), manufactured 2001. This is a large, fully enclosed machining centre from SW designed for heavy-duty vertical machining applications.
Key specifications (from seller data):
- X travel: 1300 mm
- Y travel: 630 mm
- Z travel: 630 mm
- Table size: 1275 x 630 mm
- Maximum spindle speed: 7,500 rpm
- Spindle motor power: 36 kW
- Required footprint (L x W x H): 7700 x 3700 x 4000 mm
Included components and features (as listed and observed):
- Full enclosure with three front access doors fitted with transparent viewing panels
- Vertical spindle head with a tool magazine mounted on the head
- T-slotted worktable with multiple longitudinal T-slots for fixturing
- Two rotary/chuck attachments mounted on the table
- Toolholder racks with multiple toolholders and fixtures stored alongside the machine
- Coolant/work area flushing system and flush guns are indicated in the machine specification
- Tool breakage monitoring (Leutze) and an extraction system by GEA-Delbag are listed in the specification
- Tool taper / holder type listed as SK 50 (DIN 69871, Form B)
- Electrical cabinets and cooling/ventilation units mounted at the machine rear
- Pumps/motors and filter housings at the machine base, plus mounted hydraulic/pneumatic components
- Overhead cable tray and interior inspection lighting
- Floppy disk drive listed in the specification
Condition notes (observed and reported):
- Exterior panels show light grime and marks consistent with workshop use
- Interior surfaces, including the spindle housing, show coolant staining and wear marks
- Worktable surface shows machining marks and some chip residue in troughs; a chip trough/gutter is present along the front edge
- Ceiling filter panels and some interior panels are discolored from use
- A coiled air hose is mounted on the front/right side of the machine
Optional equipment (listed by seller): extended hydraulics for workpiece clamping, valve systems for double-acting clamping cylinders, adaptations for angle drill heads, automatic loading doors, reversible clamping device and clamping bridge. (Quantities and pressures from the original list are not restated here.)
No statements are made about current operational condition, testing, or warranty. All technical specifications and listed equipment are taken from the provided machine data and observable components.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2059 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Хоризонтален обработващ център SW BA 40
Horizontální obráběcí centrum SW BA 40
SW BA 40 Vandret bearbejdningscenter
SW BA 40 Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας SW BA 40
SW BA 40 Horizontal machining center
Centro de mecanizado horizontal SW BA 40
Centre d'usinage horizontal SW BA 40
Horizontalni obradni centar SW BA 40
SW BA 40 Vízszintes megmunkáló központ
Centro di lavoro orizzontale SW BA 40
SW BA 40 Horizontalus apdirbimo centras
SW BA 40 Horizontaal bewerkingscentrum
Centrum obróbcze poziome SW BA 40
Centro de usinagem horizontal SW BA 40
Centru de prelucrare orizontal SW BA 40
SW BA 40 Горизонтальный обрабатывающий центр
Horizontalni obradni centar SW BA 40
SW BA 40 Horisontellt bearbetningscenter
Yatay işleme merkezi SW BA 40
EN
- Languages
English (GB)