| Category | Grinding - Cylindrical external / internal grinding machines |
| Max. grinding length | 540 mm |
| Grinding diameter | 300 mm |
| CNC | Yes |
| Type of CNC | Studer |
| Max. height from spindle to table | 175 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Studer S 35 |
| Last availability date | 09/10/2026 |
| Product id | P251203053 |
| Language |
This listing features a STUDER S 35 universal cylindrical grinding machine, manufactured in 1989. The machine is equipped with CNC control, specifically a Studer control system, which includes a control panel with a numeric keypad, dials, an emergency stop button, and a handheld controller. The control panel also features a display screen to facilitate operation.
The grinding machine has a maximum grinding length of 540 mm and can accommodate grinding diameters up to 300 mm. The maximum height from spindle to table is 175 mm, allowing for a range of workpiece sizes. The machine is designed for external and internal cylindrical grinding tasks.
The machine's exterior shows signs of wear and dirt, especially on the lower red and white panels and around the grinding area, indicating usage over time. The hydraulic unit is attached to the base at the rear of the machine and includes multiple motors and hoses connected to the system. There are laminated sheets attached to a white panel on the machine, which likely contain maintenance or operating instructions.
The grinding wheel is enclosed within a protective housing and is connected to hydraulic and pneumatic lines, supporting its operation. The machine bears clear branding with red text displaying "S35" and "studer" on the body, confirming its model and manufacturer.
Overall, this STUDER S 35 cylindrical grinding machine offers CNC precision with a robust setup suitable for various grinding applications. Potential buyers should note the visible signs of wear and dirt, which are consistent with industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine type: Universal grinding machine
Make: STUDER
Type: S 35
Year of construction: 1989
Control type: CNC
Control name: Studer
Grinding diameter: 300 mm
Sanding length: 540 mm
Center height: 175 mm
Total power requirement: 20 kVA
Machine weight: approx. t
Space requirement: approx. m
Center width: 1000 mm
Technical condition: as seen, where seen
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 119 |
| Last activity | Nov. 17, 2026 |
Machine type: Universal grinding machine
Make: STUDER
Type: S 35
Year of construction: 1989
Control type: CNC
Control name: Studer
Grinding diameter: 300 mm
Sanding length: 540 mm
Center height: 175 mm
Total power requirement: 20 kVA
Machine weight: approx. t
Space requirement: approx. m
Center width: 1000 mm
Technical condition: as seen, where seen
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Grinding - Cylindrical external / internal grinding machines |
| Max. grinding length | 540 mm |
| Grinding diameter | 300 mm |
| CNC | Yes |
| Type of CNC | Studer |
| Max. height from spindle to table | 175 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Studer S 35 |
| Last availability date | 09/10/2026 |
| Product id | P251203053 |
| Language |
This listing features a STUDER S 35 universal cylindrical grinding machine, manufactured in 1989. The machine is equipped with CNC control, specifically a Studer control system, which includes a control panel with a numeric keypad, dials, an emergency stop button, and a handheld controller. The control panel also features a display screen to facilitate operation.
The grinding machine has a maximum grinding length of 540 mm and can accommodate grinding diameters up to 300 mm. The maximum height from spindle to table is 175 mm, allowing for a range of workpiece sizes. The machine is designed for external and internal cylindrical grinding tasks.
The machine's exterior shows signs of wear and dirt, especially on the lower red and white panels and around the grinding area, indicating usage over time. The hydraulic unit is attached to the base at the rear of the machine and includes multiple motors and hoses connected to the system. There are laminated sheets attached to a white panel on the machine, which likely contain maintenance or operating instructions.
The grinding wheel is enclosed within a protective housing and is connected to hydraulic and pneumatic lines, supporting its operation. The machine bears clear branding with red text displaying "S35" and "studer" on the body, confirming its model and manufacturer.
Overall, this STUDER S 35 cylindrical grinding machine offers CNC precision with a robust setup suitable for various grinding applications. Potential buyers should note the visible signs of wear and dirt, which are consistent with industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 119 |
| Last activity | Nov. 17, 2026 |