Steinemann NOVA LAM 180 – Sand Brushing Machine

47,500 €

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer Steinemann
Model NOVA LAM 180 – Sand Brushing Machine
Year
Location Spain ES
Raphael
Your dedicated contact
Raphael M.

Automatic description (AI-Generated)

Steinemann NOVA LAM 180 wide-belt sanding and sand-brushing machine, manufactured by Steinemann Technology AG. The machine is designed for calibration and surface finishing of HPL, CPL and decorative laminate panels. Its process uses continuous conveyor feed with bottom sanding and brushing units. The listed technical condition is excellent.

The machine has a working width of 1,800 mm and a machine opening of 150 / 300 mm. Listed operating specifications include a production speed of up to 72 m/min, a contact drum diameter of 275 mm, an abrasive belt length of 2,620 mm and a working height of 1,400 mm. Thickness adjustment is stated in 0.01 mm increments. The stated minimum material thickness is 0.4 mm for HPL, or 0.3 mm under specific conditions, and 0.2 mm for CPL. The listed thickness tolerance is up to ±0.025 mm.

Features include a vacuum belt conveyor, rubber-coated counter-pressure roller, infrared abrasive-belt tracking and monitoring, automatic feed-speed control under overload conditions, and driven upper and lower feed rollers. Contact drum rotation is reversible, operating with or against the feed direction. Optional equipment listed for this model includes automatic thickness adjustment and ionizing bars for electrostatic discharge.

Safety features listed include automatic overload protection, abrasive-belt monitoring, an emergency-stop system, safety guards and controlled material feed. Typical uses include decorative laminate production, furniture and interior wall panels, compact laminate finishing, surface preparation before coating or printing, and fine sanding and brushing. Common consumables include abrasive sanding belts, sand-brushing rollers, conveyor belts, pressure rollers, bearings and vacuum filters.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Machine: Steinemann NOVA LAM 180
Manufacturer: Steinemann Technology AG
Machine type: Wide-belt sanding and sand-brushing machine
Technical condition: Excellent
Working width: 1,800 mm
Application: Calibration and finishing of HPL, CPL and decorative laminate panels
Operating principle: Continuous conveyor feed with abrasive-belt sanding and brushing units
Process: Bottom sanding and sand brushing

The Steinemann NOVA LAM 180 is designed for precision calibration and surface finishing of laminate panels. Its wide-belt sanding and brushing operations deliver consistent thickness and a high-quality finish for industrial production.

Machine opening: 150 / 300 mm
Production speed: Up to 72 m/min
Contact drum diameter: 275 mm
Abrasive belt length: 2,620 mm
Thickness adjustment: 0.01 mm increments
Working height: 1,400 mm
Minimum HPL thickness: 0.4 mm, or 0.3 mm under specific conditions
Minimum CPL thickness: 0.2 mm
Thickness tolerance: Up to ±0.025 mm

Features: Vacuum belt conveyor, rubber-coated counter-pressure roller, infrared abrasive-belt tracking and monitoring, automatic feed-speed control under overload conditions, and driven upper and lower feed rollers
Contact drum rotation: Reversible, with or against the feed direction
Optional equipment: Automatic thickness adjustment and ionizing bars for electrostatic discharge
Safety features: Automatic overload protection, abrasive-belt monitoring, emergency-stop system, safety guards and controlled material feed

Typical applications: Decorative laminate production, furniture panels, interior wall panels, compact laminate finishing, surface preparation before coating or printing, and fine sanding and brushing
Benefits: High surface quality and dimensional accuracy, stable high-speed production, reduced material waste, and suitability for continuous, high-volume industrial manufacturing
Common consumables: Abrasive sanding belts, sand-brushing rollers, conveyor belts, pressure rollers, bearings and vacuum filters

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Machinery manufacturer
Active since 2026
Offers online 3
Last activity Nov. 20, 2026

Seller's description

Machine: Steinemann NOVA LAM 180
Manufacturer: Steinemann Technology AG
Machine type: Wide-belt sanding and sand-brushing machine
Technical condition: Excellent
Working width: 1,800 mm
Application: Calibration and finishing of HPL, CPL and decorative laminate panels
Operating principle: Continuous conveyor feed with abrasive-belt sanding and brushing units
Process: Bottom sanding and sand brushing

The Steinemann NOVA LAM 180 is designed for precision calibration and surface finishing of laminate panels. Its wide-belt sanding and brushing operations deliver consistent thickness and a high-quality finish for industrial production.

Machine opening: 150 / 300 mm
Production speed: Up to 72 m/min
Contact drum diameter: 275 mm
Abrasive belt length: 2,620 mm
Thickness adjustment: 0.01 mm increments
Working height: 1,400 mm
Minimum HPL thickness: 0.4 mm, or 0.3 mm under specific conditions
Minimum CPL thickness: 0.2 mm
Thickness tolerance: Up to ±0.025 mm

Features: Vacuum belt conveyor, rubber-coated counter-pressure roller, infrared abrasive-belt tracking and monitoring, automatic feed-speed control under overload conditions, and driven upper and lower feed rollers
Contact drum rotation: Reversible, with or against the feed direction
Optional equipment: Automatic thickness adjustment and ionizing bars for electrostatic discharge
Safety features: Automatic overload protection, abrasive-belt monitoring, emergency-stop system, safety guards and controlled material feed

Typical applications: Decorative laminate production, furniture panels, interior wall panels, compact laminate finishing, surface preparation before coating or printing, and fine sanding and brushing
Benefits: High surface quality and dimensional accuracy, stable high-speed production, reduced material waste, and suitability for continuous, high-volume industrial manufacturing
Common consumables: Abrasive sanding belts, sand-brushing rollers, conveyor belts, pressure rollers, bearings and vacuum filters

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.



Automatic description (AI-Generated)

Steinemann NOVA LAM 180 wide-belt sanding and sand-brushing machine, manufactured by Steinemann Technology AG. The machine is designed for calibration and surface finishing of HPL, CPL and decorative laminate panels. Its process uses continuous conveyor feed with bottom sanding and brushing units. The listed technical condition is excellent.

The machine has a working width of 1,800 mm and a machine opening of 150 / 300 mm. Listed operating specifications include a production speed of up to 72 m/min, a contact drum diameter of 275 mm, an abrasive belt length of 2,620 mm and a working height of 1,400 mm. Thickness adjustment is stated in 0.01 mm increments. The stated minimum material thickness is 0.4 mm for HPL, or 0.3 mm under specific conditions, and 0.2 mm for CPL. The listed thickness tolerance is up to ±0.025 mm.

Features include a vacuum belt conveyor, rubber-coated counter-pressure roller, infrared abrasive-belt tracking and monitoring, automatic feed-speed control under overload conditions, and driven upper and lower feed rollers. Contact drum rotation is reversible, operating with or against the feed direction. Optional equipment listed for this model includes automatic thickness adjustment and ionizing bars for electrostatic discharge.

Safety features listed include automatic overload protection, abrasive-belt monitoring, an emergency-stop system, safety guards and controlled material feed. Typical uses include decorative laminate production, furniture and interior wall panels, compact laminate finishing, surface preparation before coating or printing, and fine sanding and brushing. Common consumables include abrasive sanding belts, sand-brushing rollers, conveyor belts, pressure rollers, bearings and vacuum filters.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery manufacturer
Active since 2026
Offers online 3
Last activity Nov. 20, 2026

Here is a selection of similar machines - Steinemann NOVA LAM 180 – Sand Brushing Machine


Used Woodworking Machines in Spain for Sale

Browse used woodworking machines located in Spain on Exapro: Barberán laminating and finishing lines, SCM, Biesse and Homag panel equipment, edgebanders, CNC routers and joinery machines. Filter by machine type and specification to source furniture production equipment.

Steinemann NOVA LAM 180 – Sand Brushing Machine