Contact us to receive an offer.
| Manufacturer | Starfoil |
|---|---|
| Model | 1050-HS |
| Year | 2007 |
| Location | Denmark
|
| Category | Die-cutters / Embossers / Hot foil |
| Max. paper length | 1050 cm |
| Max. paper width | 750 cm |
| Min. paper length | 450 cm |
| Min. paper width | 370 cm |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 04/11/2026 |
| Product id | P261102146 |
| Language |
щанцоване Starfoil 1050-HS
Vysekávací stroj Starfoil 1050-HS
Starfoil 1050-HS Udstanser
Starfoil 1050-HS Stanze
Κόφτης Starfoil 1050-HS
Starfoil 1050-HS Machine Automatic Foil Stamping , Embossing, and Die-Cutting Press with Mabeg Vacuum Feeder
Troqueladora Starfoil 1050-HS
Presse de découpe Starfoil 1050-HS
Izrezivač Starfoil 1050-HS
Starfoil 1050-HS Vágószerszám
Fustellatrice Starfoil 1050-HS
Starfoil 1050-HS Štampas
Starfoil 1050-HS Stansmachine
Maszyna sztancująca Starfoil 1050-HS
Cortador Starfoil 1050-HS
Decupator Starfoil 1050-HS
Starfoil 1050-HS Высекальная машина
Die-cutter Starfoil 1050-HS
Starfoil 1050-HS Skärare
Kesim Starfoil 1050-HS
|
Starfoil 1050-HS machine for hot foil stamping, embossing and die-cutting. It is equipped with a Mabeg vacuum feeder and is listed with 55 million impressions.
Key features
• Maximum sheet size: 1050 × 750 mm; minimum: 450 × 370 mm.
• Maximum area for hot foil stamping and embossing: 1020 × 720 mm; maximum die-cutting area: 1040 × 730 mm.
• Maximum mechanical speed: 7,000 impressions per hour.
• Material range: from 80 g/m² to 2.0 mm.
• Six independently programmable foil feed shafts, controlled by Siemens servomotors.
• Twelve digital heating zones, controlled by a Siemens PLC; the specified temperature range is 0–200 °C.
• Maximum foil roll diameter: 250 mm; maximum foil feed: 720 mm.
• Maximum pressing force: 300 tonnes.
Feeding and delivery
The Mabeg feeder uses a vacuum belt system, a sheet-delay device and rotary sheet centering. It includes a Becker vacuum pump, a continuous feeding system, double-sheet detection and electronic control of the side lays. The feeder table position can be adjusted during production.
Delivery is automatic and continuous. Side and rear lays, sheet-retarding brushes and a safety system for lowering the table are specified.
Foil and control system
The machine features an air separator, a fan unit for sheet stabilization, automatic ejection of the printed sheet and a system for feeding new foil. It includes cutting knives, an adjustable dwell time, a timer, a low-foil warning and a foil-break detection system. Programs can be stored in the central PLC. Two operator panels, 10- and 6-inch control screens, and a Siemens and Omron electrical and electronic system are specified.
Construction, power and dimensions
Features include a raised frame with a height of 300 mm, an automatic oiling system, a pneumatic main clutch, a safety clutch on the main drive chain and emergency brakes. The machine has a total power of 51 kW, a heating power of 21 kW and a net weight of 20,000 kg. The specified dimensions are 600 × 500 × 205 cm. The feeder pile height is 1,600 mm, and the delivery pile height is 1,300 mm in continuous mode.
An air supply from a compressor is required for operation; the compressor is not included in the offer. The description states that the machine complies with the CE standard.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Starfoil 1050-HS Machine Automatic Foil Stamping , Embossing, and Die-Cutting Press with Mabeg Vacuum Feeder
55 million impressions
STARFOIL 1050-HS – IMPORTANT FEATURES
• Mabeg vacuum feeder for efficient material feed and thin paper
• Accurate and durable drive chain
• Equipped with 6 foil pulls
• Siemens servo motors for foil pull and main clutch
• Siemens control panel and software
• 300mm raised frame with higher capacity in feeder and delivery
Machine – main characteristics
• Sheet size: 1050 x 750 mm
• Two operator panels, one for controlling foil system and one for controlling the machine
• Maximum mechanical speed 7000 impressions per hour
• Complete Siemens & Omron electric & electronical system
• Fully automatic oil system for both main machine and drive chain
• Self diagnosis system with indication on the screens
• Lock for the gripper bar can be micro-adjusted
• Gripper bars are made of special industrial aluminium with hardened grippers
• Full sheet detection throughout the machine
• Linear scale throughout the machine, both for paper and foil inspection
• Robust construction
• Pneumatic accurate main clutch
• Automatic impression on and off by Siemens servo motors
• Precise and accurate drive of the table
• Calibrated top table
• The chase is locked pneumatically
• Height of the table is indicated in millimetres
• Main drive chain equipped with security clutch
• Operator’s platform with steps and guarding
• Sheet inspection table with top lighting
• Precise, controllable and consistent pressure
• Fitted with the Mabeg vacuum feeder with suction belt technology for ultimate stable feeding.
• Standard 300mm raised frame for higher feeding and delivery capacity
• With table to prepare foil shafts outside the machine
• Equipped with E-stops
• Complies to CE norm.
Feeder section
• Mabeg feeder with vacuum belt system, slow down device and rotary sheet alignment. The Mabeg feeder offers quick set up and is excellent for light weight paper as well as board at maximum speeds.
• Paper range from 80 grs. - 2.0 mm
• Non stop feeder system is standard and offers efficiency for long production runs
• Double sheet detection
• Mabeg push and pull side lays (operator and non-operator side)
• Electronic side lay control
• Two electronic front lay controls
• Possibility to adjust timing of the inlay
• Press bar
• Safety during lowering the feeder table
• Position of the feeder table can be adjusted during production
• Becker Vacuum pump for feeder included
Delivery section
• Automatic non-stop delivery is standard. The carpet moves in and out during production automatically
• Brushes in delivery for sheet slowdown
• Equipped with side and back pushers
• Security during lowering of the delivery table
Foil section
• Air foil separator suitable for large full area stamping
• Blower unit to stabilize the sheets
• Automatic impression throw-off
• Device to feed new foil into the machine
• Equipped with shafts for foil converting with knives for foil slitting
• 6 independently programmable foil advance shafts
• Siemens servomotors to control foil pulling
• Programmable foil pulls and steps for foil advance optimization
• Possibility of preparing the foil rolls on the shafts outside the machine for installation into the foil module (table included)
• Programs can be stored in the central PLC
• Adjustable dwell time
• Timer
• Equipped with evacuation brushes for wasted foil
• Fitted with 12 digital heating zones controlled by Siemens PLC
• Detection system for foil breaking (12 units)
• Foil run out warning
• Inner foil core diameter can be 1” (25 mm) or 3” (76 mm)
• Machine can take up rolls as narrow as 20 mm without problems.
Requirements
• Power requirement 51 kW
• The machine requires air supply by means of a compressor, which is not included in the price of this machine quotation. On request we can make you a separate quotation for this required compressor.
Print specification
Maximum sheet size 1050 x 750 mm
Minimum sheet size 450 x 370 mm
Maximum stamping / embossing area 1020 x 720 mm
Maximum die-cutting area 1040 x 730 mm
Maximum mechanical speed 7000 rph
Paper range 80 grs. - 2.0 mm
Grip distance 8 mm
Foil / emboss specification
Maximum diameter of foil roll 250 mm
Foil pulls 6
Maximum foil advance 720 mm
Honeycomb plate 1 standard, 2 optional
Temperature 0 - 200 °C
Heating sectors 12
Machine specification
Height of feeder stack 1600 mm
Height of delivery stack 1300 mm in non stop condition
10" Operation screen
6" Operation screen
Non stop feeding standard
Non stop delivery standard
Total capacity 51 kW
Nett weight 20.000 kgs
Heating Capacity 21 kW
Maximum impression strength 300 tonnes
Dimensions
600 x 500 x 205 cm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2012 |
| Offers online | 1 |
| Last activity | Nov. 4, 2026 |
Starfoil 1050-HS Machine Automatic Foil Stamping , Embossing, and Die-Cutting Press with Mabeg Vacuum Feeder
55 million impressions
STARFOIL 1050-HS – IMPORTANT FEATURES
• Mabeg vacuum feeder for efficient material feed and thin paper
• Accurate and durable drive chain
• Equipped with 6 foil pulls
• Siemens servo motors for foil pull and main clutch
• Siemens control panel and software
• 300mm raised frame with higher capacity in feeder and delivery
Machine – main characteristics
• Sheet size: 1050 x 750 mm
• Two operator panels, one for controlling foil system and one for controlling the machine
• Maximum mechanical speed 7000 impressions per hour
• Complete Siemens & Omron electric & electronical system
• Fully automatic oil system for both main machine and drive chain
• Self diagnosis system with indication on the screens
• Lock for the gripper bar can be micro-adjusted
• Gripper bars are made of special industrial aluminium with hardened grippers
• Full sheet detection throughout the machine
• Linear scale throughout the machine, both for paper and foil inspection
• Robust construction
• Pneumatic accurate main clutch
• Automatic impression on and off by Siemens servo motors
• Precise and accurate drive of the table
• Calibrated top table
• The chase is locked pneumatically
• Height of the table is indicated in millimetres
• Main drive chain equipped with security clutch
• Operator’s platform with steps and guarding
• Sheet inspection table with top lighting
• Precise, controllable and consistent pressure
• Fitted with the Mabeg vacuum feeder with suction belt technology for ultimate stable feeding.
• Standard 300mm raised frame for higher feeding and delivery capacity
• With table to prepare foil shafts outside the machine
• Equipped with E-stops
• Complies to CE norm.
Feeder section
• Mabeg feeder with vacuum belt system, slow down device and rotary sheet alignment. The Mabeg feeder offers quick set up and is excellent for light weight paper as well as board at maximum speeds.
• Paper range from 80 grs. - 2.0 mm
• Non stop feeder system is standard and offers efficiency for long production runs
• Double sheet detection
• Mabeg push and pull side lays (operator and non-operator side)
• Electronic side lay control
• Two electronic front lay controls
• Possibility to adjust timing of the inlay
• Press bar
• Safety during lowering the feeder table
• Position of the feeder table can be adjusted during production
• Becker Vacuum pump for feeder included
Delivery section
• Automatic non-stop delivery is standard. The carpet moves in and out during production automatically
• Brushes in delivery for sheet slowdown
• Equipped with side and back pushers
• Security during lowering of the delivery table
Foil section
• Air foil separator suitable for large full area stamping
• Blower unit to stabilize the sheets
• Automatic impression throw-off
• Device to feed new foil into the machine
• Equipped with shafts for foil converting with knives for foil slitting
• 6 independently programmable foil advance shafts
• Siemens servomotors to control foil pulling
• Programmable foil pulls and steps for foil advance optimization
• Possibility of preparing the foil rolls on the shafts outside the machine for installation into the foil module (table included)
• Programs can be stored in the central PLC
• Adjustable dwell time
• Timer
• Equipped with evacuation brushes for wasted foil
• Fitted with 12 digital heating zones controlled by Siemens PLC
• Detection system for foil breaking (12 units)
• Foil run out warning
• Inner foil core diameter can be 1” (25 mm) or 3” (76 mm)
• Machine can take up rolls as narrow as 20 mm without problems.
Requirements
• Power requirement 51 kW
• The machine requires air supply by means of a compressor, which is not included in the price of this machine quotation. On request we can make you a separate quotation for this required compressor.
Print specification
Maximum sheet size 1050 x 750 mm
Minimum sheet size 450 x 370 mm
Maximum stamping / embossing area 1020 x 720 mm
Maximum die-cutting area 1040 x 730 mm
Maximum mechanical speed 7000 rph
Paper range 80 grs. - 2.0 mm
Grip distance 8 mm
Foil / emboss specification
Maximum diameter of foil roll 250 mm
Foil pulls 6
Maximum foil advance 720 mm
Honeycomb plate 1 standard, 2 optional
Temperature 0 - 200 °C
Heating sectors 12
Machine specification
Height of feeder stack 1600 mm
Height of delivery stack 1300 mm in non stop condition
10" Operation screen
6" Operation screen
Non stop feeding standard
Non stop delivery standard
Total capacity 51 kW
Nett weight 20.000 kgs
Heating Capacity 21 kW
Maximum impression strength 300 tonnes
Dimensions
600 x 500 x 205 cm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Die-cutters / Embossers / Hot foil |
| Max. paper length | 1050 cm |
| Max. paper width | 750 cm |
| Min. paper length | 450 cm |
| Min. paper width | 370 cm |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 04/11/2026 |
| Product id | P261102146 |
| Language |
щанцоване Starfoil 1050-HS
Vysekávací stroj Starfoil 1050-HS
Starfoil 1050-HS Udstanser
Starfoil 1050-HS Stanze
Κόφτης Starfoil 1050-HS
Starfoil 1050-HS Machine Automatic Foil Stamping , Embossing, and Die-Cutting Press with Mabeg Vacuum Feeder
Troqueladora Starfoil 1050-HS
Presse de découpe Starfoil 1050-HS
Izrezivač Starfoil 1050-HS
Starfoil 1050-HS Vágószerszám
Fustellatrice Starfoil 1050-HS
Starfoil 1050-HS Štampas
Starfoil 1050-HS Stansmachine
Maszyna sztancująca Starfoil 1050-HS
Cortador Starfoil 1050-HS
Decupator Starfoil 1050-HS
Starfoil 1050-HS Высекальная машина
Die-cutter Starfoil 1050-HS
Starfoil 1050-HS Skärare
Kesim Starfoil 1050-HS
|
Starfoil 1050-HS machine for hot foil stamping, embossing and die-cutting. It is equipped with a Mabeg vacuum feeder and is listed with 55 million impressions.
Key features
• Maximum sheet size: 1050 × 750 mm; minimum: 450 × 370 mm.
• Maximum area for hot foil stamping and embossing: 1020 × 720 mm; maximum die-cutting area: 1040 × 730 mm.
• Maximum mechanical speed: 7,000 impressions per hour.
• Material range: from 80 g/m² to 2.0 mm.
• Six independently programmable foil feed shafts, controlled by Siemens servomotors.
• Twelve digital heating zones, controlled by a Siemens PLC; the specified temperature range is 0–200 °C.
• Maximum foil roll diameter: 250 mm; maximum foil feed: 720 mm.
• Maximum pressing force: 300 tonnes.
Feeding and delivery
The Mabeg feeder uses a vacuum belt system, a sheet-delay device and rotary sheet centering. It includes a Becker vacuum pump, a continuous feeding system, double-sheet detection and electronic control of the side lays. The feeder table position can be adjusted during production.
Delivery is automatic and continuous. Side and rear lays, sheet-retarding brushes and a safety system for lowering the table are specified.
Foil and control system
The machine features an air separator, a fan unit for sheet stabilization, automatic ejection of the printed sheet and a system for feeding new foil. It includes cutting knives, an adjustable dwell time, a timer, a low-foil warning and a foil-break detection system. Programs can be stored in the central PLC. Two operator panels, 10- and 6-inch control screens, and a Siemens and Omron electrical and electronic system are specified.
Construction, power and dimensions
Features include a raised frame with a height of 300 mm, an automatic oiling system, a pneumatic main clutch, a safety clutch on the main drive chain and emergency brakes. The machine has a total power of 51 kW, a heating power of 21 kW and a net weight of 20,000 kg. The specified dimensions are 600 × 500 × 205 cm. The feeder pile height is 1,600 mm, and the delivery pile height is 1,300 mm in continuous mode.
An air supply from a compressor is required for operation; the compressor is not included in the offer. The description states that the machine complies with the CE standard.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2012 |
| Offers online | 1 |
| Last activity | Nov. 4, 2026 |
EN
- Languages
English (GB)