Contact us to receive an offer.
| Manufacturer | STANKOIMPORT |
|---|---|
| Model | 165 |
| Year | 1975 |
| Location | Poland
|
This is a heavy-duty lathe machine, model 165, manufactured by STANKOIMPORT in 1975. It is designed for large-scale turning operations with a maximum turning length of 2800 mm and a maximum turning diameter over the bed of 1000 mm. The lathe features a spindle power of 22 kW and a spindle speed range from 5 to 500 rpm, supported by 24 spindle speed stages. It has two axes and does not include any rotating tools or additional tooling stations.
The machine's overall dimensions are 5825 mm in length, 2100 mm in width, and 1760 mm in height, with a total weight of approximately 12,500 kg. The spindle hole diameter is 85 mm, and the tailstock is equipped with a Morse taper size 5.
The lathe bed includes guide rails running along its length to support precise carriage movement. Manual operation is facilitated through handwheels and levers that control the carriage and cross-slide. The machine shows visible signs of wear and rust, particularly around the chuck and base areas, which is typical for equipment of this age and usage.
A wooden pallet is positioned in front of the machine, likely used for transporting or supporting the lathe during handling. This lathe is suitable for industrial turning applications requiring substantial size and power capabilities, especially where large diameter and length workpieces are involved.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Heavy lathe 165x2800 built by the USSR.
-type: 165
-year of construction: 1975
-Maximum turning length: 2800 mm
-Maximum turning diameter over bed: 1000 mm
-Maximum turning diameter over the slide: 600 mm
-Spindle hole diameter: 85 mm
-Tailstock: Morse 5
-Number of spindle speed stages: 24
-Spindle speed: 5-500 rpm
-Number of support feed stages: 32
-Main drive engine power: 22 kW
-Machine dimensions: [L x W x H]: 5825 x 2100 x 1760 mm
-Weight: 12,500 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 19 |
| Last activity | Nov. 6, 2026 |
Heavy lathe 165x2800 built by the USSR.
-type: 165
-year of construction: 1975
-Maximum turning length: 2800 mm
-Maximum turning diameter over bed: 1000 mm
-Maximum turning diameter over the slide: 600 mm
-Spindle hole diameter: 85 mm
-Tailstock: Morse 5
-Number of spindle speed stages: 24
-Spindle speed: 5-500 rpm
-Number of support feed stages: 32
-Main drive engine power: 22 kW
-Machine dimensions: [L x W x H]: 5825 x 2100 x 1760 mm
-Weight: 12,500 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This is a heavy-duty lathe machine, model 165, manufactured by STANKOIMPORT in 1975. It is designed for large-scale turning operations with a maximum turning length of 2800 mm and a maximum turning diameter over the bed of 1000 mm. The lathe features a spindle power of 22 kW and a spindle speed range from 5 to 500 rpm, supported by 24 spindle speed stages. It has two axes and does not include any rotating tools or additional tooling stations.
The machine's overall dimensions are 5825 mm in length, 2100 mm in width, and 1760 mm in height, with a total weight of approximately 12,500 kg. The spindle hole diameter is 85 mm, and the tailstock is equipped with a Morse taper size 5.
The lathe bed includes guide rails running along its length to support precise carriage movement. Manual operation is facilitated through handwheels and levers that control the carriage and cross-slide. The machine shows visible signs of wear and rust, particularly around the chuck and base areas, which is typical for equipment of this age and usage.
A wooden pallet is positioned in front of the machine, likely used for transporting or supporting the lathe during handling. This lathe is suitable for industrial turning applications requiring substantial size and power capabilities, especially where large diameter and length workpieces are involved.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 19 |
| Last activity | Nov. 6, 2026 |
Швейцарски тип струг STANKOIMPORT 165
Soustruh - Švýcarský typ STANKOIMPORT 165
Drejebænk af schweizisk type STANKOIMPORT 165
STANKOIMPORT 165 Langdrehautomat
Ελβετικός τόρνος STANKOIMPORT 165
STANKOIMPORT 165 Swiss type lathe
Torno monohusillo STANKOIMPORT 165
Tour monobroche STANKOIMPORT 165
Švicarski tip struga STANKOIMPORT 165
STANKOIMPORT 165 Svájci típusú eszterga
tornio a fantina mobile STANKOIMPORT 165
Šveicariško tipo tekinimo staklės STANKOIMPORT 165
STANKOIMPORT 165 Zwitserse type draaibank
Tokarka ciężka STANKOIMPORT 165x2800 1975r
Torno tipo suíço STANKOIMPORT 165
strung de tip elvețian STANKOIMPORT 165
STANKOIMPORT 165 Швейцарский тип токарного станка
Strug švajcarskog tipa STANKOIMPORT 165
STANKOIMPORT 165 svarv av schweizisk typ
İsviçre tipi torna tezgahı STANKOIMPORT 165
EN
- Languages
English (GB)