Contact us to receive an offer.
| Manufacturer | Stanko import USSR |
|---|---|
| Model | КО 128АФ4 |
| Year | 1987 |
| Location | Ukraine
|
This listing features a coordinate turret punching press, model KO 128AF4, manufactured by Stanko Import USSR in 1987. The machine is designed for punching and nibbling operations with a nominal force capacity of 63 tons (630 kN). It is equipped with a circular turret holding 32 tool positions, allowing for a variety of punching tools to be used. The maximum diameter of holes that can be punched is 170 mm, and it can handle steel sheets with a maximum thickness of 8 mm. The machine accommodates sheet sizes up to 1200 mm by 1200 mm, which can be extended to 2000 mm by 2000 mm with repositioning.
The punching press operates at a speed of up to 50 strokes per minute. Its overall dimensions are 3700 mm in length, 5250 mm in width, and 2600 mm in height, with a substantial weight of 21,500 kg. The machine features a large motor or flywheel mounted on the side, which is part of its power transmission system. The electrical control panel is housed inside a metal cabinet containing wiring, relays, and switches; it shows signs of age and dust but appears intact.
The machine shows visible signs of wear and dust accumulation consistent with use and storage in an industrial environment. It is situated in a factory or workshop setting alongside other industrial equipment. Documentation in Russian, including technical specifications and a manual produced by the Chymkent forging-press equipment association, accompanies the machine. Handwritten notes dated July 24, 1987, indicate that the machine passed inspection and is deemed suitable for operation. This punching press is suitable for industrial metalworking applications requiring precise and versatile punching capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Coordinate turret punching press model KO 128AF4 .
1987 г
Force 63 tons.
Number of tools ...32
The largest diameter of a hole ... 170mm
The greatest thickness of the sheet ... 8mm
Sheet dimensions...1200*2000mm
Dimensions: L*W*H---. 3700*5250*2600
Mass ... 21500 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 5 |
| Last activity | Nov. 3, 2026 |
Coordinate turret punching press model KO 128AF4 .
1987 г
Force 63 tons.
Number of tools ...32
The largest diameter of a hole ... 170mm
The greatest thickness of the sheet ... 8mm
Sheet dimensions...1200*2000mm
Dimensions: L*W*H---. 3700*5250*2600
Mass ... 21500 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a coordinate turret punching press, model KO 128AF4, manufactured by Stanko Import USSR in 1987. The machine is designed for punching and nibbling operations with a nominal force capacity of 63 tons (630 kN). It is equipped with a circular turret holding 32 tool positions, allowing for a variety of punching tools to be used. The maximum diameter of holes that can be punched is 170 mm, and it can handle steel sheets with a maximum thickness of 8 mm. The machine accommodates sheet sizes up to 1200 mm by 1200 mm, which can be extended to 2000 mm by 2000 mm with repositioning.
The punching press operates at a speed of up to 50 strokes per minute. Its overall dimensions are 3700 mm in length, 5250 mm in width, and 2600 mm in height, with a substantial weight of 21,500 kg. The machine features a large motor or flywheel mounted on the side, which is part of its power transmission system. The electrical control panel is housed inside a metal cabinet containing wiring, relays, and switches; it shows signs of age and dust but appears intact.
The machine shows visible signs of wear and dust accumulation consistent with use and storage in an industrial environment. It is situated in a factory or workshop setting alongside other industrial equipment. Documentation in Russian, including technical specifications and a manual produced by the Chymkent forging-press equipment association, accompanies the machine. Handwritten notes dated July 24, 1987, indicate that the machine passed inspection and is deemed suitable for operation. This punching press is suitable for industrial metalworking applications requiring precise and versatile punching capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 5 |
| Last activity | Nov. 3, 2026 |
CNC машина за щанцоване Stanko import USSR КО 128АФ4
Děrovací stroj CNC Stanko import USSR КО 128АФ4
Stanko import USSR КО 128АФ4 CNC stansemaskine
Stanko import USSR КО 128АФ4 CNC Stanzmaschine
CNC μηχάνημα διάτρησης Stanko import USSR КО 128АФ4
Stanko import USSR КО 128АФ4 CNC punching machine
Punzonadora CNC Stanko import USSR КО 128АФ4
Poinçonneuse à cnc Stanko import USSR КО 128АФ4
CNC stroj za bušenje Stanko import USSR КО 128АФ4
Stanko import USSR КО 128АФ4 CNC lyukasztógép
Punzonatrice CNC Stanko import USSR КО 128АФ4
CNC perforavimo mašina Stanko import USSR КО 128АФ4
Stanko import USSR КО 128АФ4 CNC-ponsmachine
Wykrawarka CNC Stanko import USSR КО 128АФ4
Máquina de perfuração CNC Stanko import USSR КО 128АФ4
Mașină de perforat CNC Stanko import USSR КО 128АФ4
Stanko import USSR КО 128АФ4 Перфоратор с ЧПУ
CNC mašina za probijanje Stanko import USSR КО 128АФ4
Stanko import USSR КО 128АФ4 CNC stansmaskin
CNC punch makinesi Stanko import USSR КО 128АФ4
EN
- Languages
English (GB)