| Manufacturer | SPINNER |
|---|---|
| Model | VC 560 |
| Year | 2007 |
| Location | Romania
|
This SPINNER VC 560 vertical machining center, manufactured in 2007, is a CNC milling machine designed for precision machining tasks. It features a 3-axis configuration with X, Y, and Z travels of 560 mm, 410 mm, and 410 mm respectively, and is prepared for a 4th axis, which is included but not installed. The machine has a compact footprint with dimensions of 2400 mm in length, 1800 mm in width, and 2500 mm in height, weighing approximately 5500 kg.
The worktable measures 650 mm by 410 mm and includes three T-slots (14 mm) capable of supporting a maximum part weight of 250 kg. The spindle offers a maximum speed of 12,000 rpm powered by a 20 kW motor, using an SK 40 taper. The tool magazine holds 24 tool pockets with a maximum tool diameter of 77 mm (up to 125 mm if adjacent pockets are free) and a maximum tool length of 200 mm. Tool change time is approximately 1.3 seconds. The machine is equipped with a coolant system holding 250 liters.
The enclosure and machine surfaces show some signs of use and wear, consistent with operational equipment, including wear marks on the enclosure and inside the machining area. The spindle and coolant nozzles appear clean and in usable condition. The machining area includes coolant hoses and a worktable currently loaded with multiple metal parts or fixtures. A control panel with screen and keypad is mounted on the right side of the machine, accompanied by a tool holder rack containing various tooling in front of the machine.
Additional equipment includes a new, unused 4th axis still in its original packaging, a complete tooling set, and a tool cabinet. The machine operates on a 3 x 400 V / 50 Hz power supply with a total power consumption of 20 kVA and requires compressed air at 6 bar. Rapid traverse speed is 48 m/min. This SPINNER VC 560 vertical machining center offers a robust solution for milling operations requiring precision and flexibility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.Condition: Operational; reportedly very low usage
Control: To be confirmed
Power supply: 3 x 400 V / 50 Hz
Total power: 20 kVA
Compressed air: 6 bar
Table: 650 x 410 mm; 3 T-slots (14 mm)
Rapid traverse: 48 m/min
Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s
Coolant system: 250 L
Spindle hours: Unknown (reported very low)
Additional equipment
New 4th axis (included, never installed, unused, still in box)
Complete tooling set included (as shown in the pictures)
Tool cabinet (as shown in the pictures)
Machine Height: 2500 mm
Machine Length: 2400 mm
Machine Weight: 5500 kg
Machine Width: 1800 mm
Max. Tool Weight: 5 kg
Spindle Speed: 12000 RPM
Table Load: 250 kg
Taper Size: SK 40
X-axis Travel: 560 mm
Y-axis Travel: 410 mm
Z-axis Travel: 410 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.Condition: Operational; reportedly very low usage
Control: To be confirmed
Power supply: 3 x 400 V / 50 Hz
Total power: 20 kVA
Compressed air: 6 bar
Table: 650 x 410 mm; 3 T-slots (14 mm)
Rapid traverse: 48 m/min
Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s
Coolant system: 250 L
Spindle hours: Unknown (reported very low)
Additional equipment
New 4th axis (included, never installed, unused, still in box)
Complete tooling set included (as shown in the pictures)
Tool cabinet (as shown in the pictures)
Machine Height: 2500 mm
Machine Length: 2400 mm
Machine Weight: 5500 kg
Machine Width: 1800 mm
Max. Tool Weight: 5 kg
Spindle Speed: 12000 RPM
Table Load: 250 kg
Taper Size: SK 40
X-axis Travel: 560 mm
Y-axis Travel: 410 mm
Z-axis Travel: 410 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This SPINNER VC 560 vertical machining center, manufactured in 2007, is a CNC milling machine designed for precision machining tasks. It features a 3-axis configuration with X, Y, and Z travels of 560 mm, 410 mm, and 410 mm respectively, and is prepared for a 4th axis, which is included but not installed. The machine has a compact footprint with dimensions of 2400 mm in length, 1800 mm in width, and 2500 mm in height, weighing approximately 5500 kg.
The worktable measures 650 mm by 410 mm and includes three T-slots (14 mm) capable of supporting a maximum part weight of 250 kg. The spindle offers a maximum speed of 12,000 rpm powered by a 20 kW motor, using an SK 40 taper. The tool magazine holds 24 tool pockets with a maximum tool diameter of 77 mm (up to 125 mm if adjacent pockets are free) and a maximum tool length of 200 mm. Tool change time is approximately 1.3 seconds. The machine is equipped with a coolant system holding 250 liters.
The enclosure and machine surfaces show some signs of use and wear, consistent with operational equipment, including wear marks on the enclosure and inside the machining area. The spindle and coolant nozzles appear clean and in usable condition. The machining area includes coolant hoses and a worktable currently loaded with multiple metal parts or fixtures. A control panel with screen and keypad is mounted on the right side of the machine, accompanied by a tool holder rack containing various tooling in front of the machine.
Additional equipment includes a new, unused 4th axis still in its original packaging, a complete tooling set, and a tool cabinet. The machine operates on a 3 x 400 V / 50 Hz power supply with a total power consumption of 20 kVA and requires compressed air at 6 bar. Rapid traverse speed is 48 m/min. This SPINNER VC 560 vertical machining center offers a robust solution for milling operations requiring precision and flexibility.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център SPINNER VC 560
Vertikální obráběcí centrum SPINNER VC 560
SPINNER VC 560 Lodret bearbejdningscenter
SPINNER VC 560 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας SPINNER VC 560
SPINNER VC 560 Vertical machining center
Centro de mecanizado vertical SPINNER VC 560
Centre d'usinage vertical SPINNER VC 560
Vertikalni obradni centar SPINNER VC 560
SPINNER VC 560 Függőleges megmunkáló központ
Centro di lavoro verticale SPINNER VC 560
Vertikalus apdirbimo centras SPINNER VC 560
SPINNER VC 560 Verticaal bewerkingscentrum
Pionowe centrum obróbcze SPINNER VC 560
Centro de usinagem vertical SPINNER VC 560
Centru de prelucrare vertical SPINNER VC 560
SPINNER VC 560 Вертикальный обрабатывающий центр
Vertikalni obradni centar SPINNER VC 560
SPINNER VC 560 Vertikalt bearbetningscenter
Dikey işleme merkezi SPINNER VC 560
EN
- Languages
English (GB)