Optima DMF

Manufacturer	Optima
Model	DMF
Category	Miscellaneous machines

PLUMETT CABLEJET P01 cable-blowing machine

France 2020

PLUMETT CABLEJET P01 cable-blowing machine from 2020 Good condition. Manufactured in 2020. Comes with crates, manual, and all accessories shown in the photos. The most widely used jetting machine. It blows, never stops, and will keep going for years. In the beginning... there was the CableJet™. Discover our machine for blowing or floating telecommunications cables and fibers (optical fibers, coaxial, or multi-pair) into pre-installed conduits. For cables and fibers with a diameter of 9 to 18 mm and conduits with an outer diameter of 20 to 63 mm. The CableJet™ jetting machine is designed for blowing or floating telecommunications cables and fibers (optical fibers, coaxial cables, or multi-pair cables) into pre-installed conduits. This jetting machine is highly reliable, with a proven track record of over 35 years of service in cable installation and a global reputation. Compact, lightweight, and easy to use, this jetting machine comes with a tool kit containing all the tools needed for maintenance and service. Furthermore, its superior design and high-quality construction enhance installation performance. Its components are selected and manufactured to meet the highest standards. Like all our jetting machines, it is equipped with a distance and speed meter for better control during installation.

11,000 €

View product

COSMOS 18/36 kW High-Capacity Industrial Steam Cleaner

France 2017

2017 COSMOS 18/36 kW High-Capacity Industrial Steam Cleaner Good condition. Manufactured in 2017. Comes with all accessories shown in the photos. Was used in a brewery to clean tanks as part of a CIP (Clean-in-Place) process. COSMOS: a powerful industrial steam cleaner It was designed for intensive degreasing and cleaning operations in industrial settings. Equipped with four boilers of 9,000 W each, it is a uniquely designed cleaner operating at 63 A/h. The 18/36 kW version can be plugged into a 63 A/h outlet to operate at 36 kW of electrical power, or, if a 63 A/h outlet is not available, to connect the Cosmos to a 32 A/h outlet to achieve a maximum power output of 18 kW. With a maximum output of nearly 1 liter of saturated dry steam per minute, the COSMOS is designed to handle virtually any task requiring a mobile unit with the cleaning power you’d expect from a stationary system. COSMOS 18/36 kW, 5-pin connection: 18 kW on a 32 A/h power supply 36 kW on a 63 A/h power supply

7,000 €

View product

KSG COSMOS 18/36kw industrial steam cleaner large capacity

France 2017

Engine power	36 kW

8,000 €

View product

GERMANPLAST SRL DRAINING SCREW

Italy 2026

Engine power	2.2 kW

Price on request

View product

SIMATIC MICROBOX PC Siemens SIMATIC Microbox IPC 6AG4140-4BL14-0DB0 Industrial PC 2016 IPC427C

France 2016

SIEMENS SIMATIC MICROBOX IPC – INDUSTRIAL PC Part Number: 6AG4140-4BL14-0DB0 Series: SIMATIC IPC Year: 2016 Compact industrial computer used in automation and production control systems. Usage: This industrial PC is used as a supervision, control, and data acquisition unit in industrial environments. It often serves as an interface between PLCs, machines, and supervision systems (SCADA / HMI). Condition: Used, in good visual condition. Sold as shown in the photos. Contents: 1 Siemens SIMATIC Microbox IPC industrial PC.

1,600 €

View product

Schneider Modicon Quantum 140 CPU 652 60 Industrial PLC 2014

France 2013

SCHNEIDER ELECTRIC MODICON QUANTUM CPU Year: 2014 Central processing unit (CPU) for the Schneider Modicon Quantum industrial controller. This module serves as the main processor in an industrial automation system. It executes PLC programs, manages communications between modules, and controls industrial processes via the system’s input/output cards. Compatible with Schneider Modicon Quantum architectures. Condition: Used, in good visual condition. Not tested. Sold as shown in the photos. Contents: 1 Schneider Modicon Quantum CPU module. Fast shipping and careful packaging.

3,500 €

View product

2023 CIF TECHNODRILL 3 3-Axis CNC Rapid Prototyping Machine + Tool Changer + Cooler

France 2023

CIF TECHNODRILL 3 3-Axis CNC Rapid Prototyping Machine from 2023 + tool changer + coolant system In good working condition. Year: 2023. Numerous photos available upon request. + tool changer + coolant system machining center With the Technodrill 3, drill, engrave, mill, cut, trim, dose, inspect,... The ultimate in versatility! Technodrill 3, high-precision rapid prototyping. Also suitable for double-sided English engraving. 3-axis _ 3D machine 90 mm clearance under Z-axis Working range 390 x 315 x 60 mm (actual under tool with options) Software-controlled spindle rotation Immediate setup Versatile: drilling, milling, contouring, panel cutting, cutting, inspection, dosing... Compatible with all file types: HPGL, ISO, EXCELLON, GERBER, G-code, DXF, etc. Integrated electronic control unit Standard Z-axis movable probe Automatic repositioning via optical recognition of reference marks (drill holes) with the HD camera option (U700216) Safety: mechanical clamping and software-controlled clamping Standard protective cover and low-voltage lighting

3,997 €

View product

TBMI HM600 Micronizer hammer mill from 2020 with vibrator

France 2020

TBMI HM600 Micronizer hammer mill from 2020 with vibrator Good working condition. Date: 2020. With ITALVIBRAS CVEM vibrator.

6,000 €

View product

Logo 20m³, NEW Wastewater treatment plant

Netherlands 2026

Wastewater treatment plant, 20m³, NEW We have a complete Wastewater Treatment Plant available with a capacity of 20m³. This system is designed to handle your wastewater processing needs efficiently and effectively. The plant includes a high-performance DAF unit for efficient flotation and separation of contaminants. It also features a rotary screen to pre-treat and remove large debris from the wastewater. This WWTP also comes with a flocculator Consisting off: – DAF Unit, 20 m³ – Rotary screen, all inlet sizes available. – Flocculator The complete Plant will be made in Spain. Year 2026 Capacity 20 m³/hr Condition NEW

Price on request

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

Novoflow - DMK NF-LC-M 500 Machine Low working hours

Austria 2023

Engine power	0.5 kW

Price on request

View product

Müller-Weingarten HUQ 630.28 Machine

Sweden 2012

Engine power	81 kW

Price on request

View product

Automatic mask machine FFP2/FFP3/KN95/KN99 high speed (100-120 pieces/minute) semi-new used, new generation, full optional

Italy 2022

High speed (100-120 pieces/minute) automatic mask machine new generation full optional for the production of FFP2, FFP3, KN95, KN99 mask/respirator, used semi-new. Machine condition: SEMI-NEW, the white steel top is still covered with the protective cellophane. Mask/respirator type: fold flat without valve with earloops. The automatic production line integrates material roll unwinding, mask/respirator forming, nose wire feeding and application, earloops welding, edge sealing welding, cutting and ejection of the finished product. The forming of the mask/respirator, the welding of the earloops and the welding of the edge sealing are carried out with automated ultrasonic equipment. The material supply and the mask/respirator processing take place synchronously in order to ensure the automated production process. The actual production rate and production speed depend on several factors, including the quality, thicknesses and "weldability" of the materials used. Max production capacity: 100-120 pieces/minute Production year: 2022 Power supply: 220V Frequency: 50-60 Hz Input power: <3 kW Air pressure: 0.5-0.7 Mpa (5-7 Bar) Predisposition material rack: from 1 to 5 layers of material Max roll diameter: 700-800 mm Max roll height: 260 mm Expanding shafts/unwinder (5 pieces): tension adjustable by controller Servo motors: no. 13 servo motors Control: 100% PLC PLC languages: Italian, English, Chinese, …

Price on request

View product

TopLinq 1600x2500 Automated cutting machine Low working hours

Italy 2022

CNC machine with oscillating cutting, working area 1600 x 2500, automatic feed with rotary table, suction table, 9Kw vacuum pump, easy to use, reads DXF files and performs cutting.

12,000 €

View product

Stainless steel circular vibrating sieve – 90 cm

France 2009

Engine power	1.1 kW

Price on request

View product

Rollwasch Rollwasch RWO-D-520-GL/VVD+ Machine Hot deal Low working hours

Italy 2017

Engine power	50 kW

Price on request

View product

Zenner Ventilatoren GmbH VRZ 560/20/1 ZAH high temperature - Blower

Netherlands 2016

Engine power	5.5 kW

Price on request

View product

Zenner Ventilatoren GmbH VRZ 280/50/1 WBN - Blower

Netherlands 2015

Engine power	0.55 kW

Price on request

View product

Reitz KXE 200-002530-00 - Blower

Netherlands 2012

Engine power	30 kW

Price on request

View product

Zenner Ventilatoren GmbH VRZ 1000/20/1 ZAH high temperature - Blower

Netherlands 2015

Engine power	18.5 kW

Price on request

View product

Kassow Robot KR1205 - 7-Achsen, große Reichweite, günstiger als ein Universal Robot Low working hours

Germany 2023

Engine power	1 kW

14,500 € Price is negotiable

View product

hot-melt surface laminating machine

Germany 2012

This is a hot-melt surface laminating machine with a 1400 mm wide die. Laminating width: 1350 mm Laminating thickness: 1 mm–50 mm materials Materials we have laminated: PVC, PP, HPL, wood, aluminium Infeed approx. 6 m Outfeed approx. 10 m There is a lift table at the outfeed With 4-fold brush and radiant heater for heating the material. - Inject printer Infeed built in 2012 Machine built approx. 2000 Still in operation. Available for immediate delivery.

Price on request

View product

Cummins QSF3.8 Diesel Engine 130HP 97kW Tier 4 Final

Finland 2019

Engine power	97 kW

9,400 €

View product

Bravisol Lui Mini HD

Lithuania 2018

BRAVIISOL Type LUI MINI HD Length (mm) 1700 Width (mm) 760 Height (mm) 1747 Weight (kg) 530 Transport length (mm) 1192 Work Area Indoor Working height (m) 5.0 Platform height max (M) 2.9 Platform length m 1.04 Platform width m 0.63 Platform extension (M) 0.25 Platform capacity (Kg) 180 Max number of people st 1 Propellant BATTERY Propulsion 2 WD

4,000 €

View product

Wattsan 1610lt Low working hours

Bulgaria 2022

Engine power	120 kW

6,990 €

View product

New Schwarzer Rührtechnik SRT IBC-0100-230V mixer

Germany 2024

Engine power	0.75 kW

Price on request

View product

CANGQIAO MACHINE CQY-01-150 Machine

Poland 2012

Engine power	3 kW

5,220 € Price is negotiable

View product

Diller Wattsan 6090 LT Laser Cutting and Engraving Machine Hot deal

Latvia 2022

For sale: Professional Wattsan 6090 LT CO₂ Laser Cutting and Engraving Machine with CNC control. The machine is in excellent technical and cosmetic condition, carefully maintained and gently used. Previously used for laser engraving, cutting chipboard, natural wood veneer, and manufacturing decorative elements. Perfect for furniture production, woodworking workshops, interior decoration, advertising, custom manufacturing, and small businesses. Manufacturer: Wattsan Model: 6090 LT Laser Type: CO₂ Laser Laser Power: 80–90 W (standard configuration) Working Area: 900 × 600 mm Engraving Speed: Up to 500 mm/s Cutting Speed: Up to 500 mm/s Positioning Accuracy: Up to 0.03 mm Wood Cutting Thickness: Approximately 10–13 mm (depending on material) Control System: Ruida Compatible Software: RDWorks / LaserWork Cooling System: Water Cooling Working Table: Adjustable-height slat table Focal Length: 50 mm Connectivity: USB / LAN Power Supply: 220 V / 50 Hz Machine Dimensions: Approximately 1490 × 1030 × 1003 mm 🛠 COMPATIBLE MATERIALS ✔️ Chipboard and MDF ✔️ Natural Wood Veneer and Plywood ✔️ Solid Wood and Wood Products ✔️ Acrylic and Plexiglass ✔️ Genuine and Artificial Leather ✔️ Cardboard, Paper and Fabric ✔️ Rubber and Other Laser-Compatible Materials ✅ MAIN ADVANTAGES ✔️ Excellent technical and visual condition ✔️ Carefully maintained and operated ✔️ …

7,000 € Price is negotiable

View product

Scorpion Pneumatic tunnel Machine

Lithuania 2019

Two-chamber pneumatic tunnel The installation is incomplete; according to the technical documentation, positions 1, 5, and 6 are missing.

Price on request

View product

Kunshan Yuhan YH-800L Industrial cable tie machine

France 2020

🔩 FOR SALE - Industrial collator (cable tie) 📍Cabling equipment - Robust, reliable equipment As part of a reorganization of our workshop, we're putting up for sale a professional colsonneuse suitable for demanding industrial environments. ⚙️ Technical specifications: Application: automatic fastening and tightening of collars / clamps Type: electric clamping machine Ideal for: cable harnesses, electronic sub-assemblies, electrical cabinets Tension and cut adjustment to suit different types of clamps Foot pedal for hands-free operation Condition: excellent - material visible, tested and immediately available ✅ Advantages: Considerable time savings on your wiring operations Precise, uniform clamping Ideal for mass production or prototyping Robust construction - designed for intensive use 📍Location : Wasquehal

5,000 €

View product

Here is a selection of similar machines - Optima DMF

Specifications

Similar machines sold on our website

Are you looking for this machine?