Multicam 3000 Series

Used MultiCam 1000 series CNC 3 Axis CNC Routerer , New in 2007, 4'x8' Table, 5HP Spindle, 10HP Vacuum Pump, Multivision Camera and Recognition Software, Very low hours and light cutting of sign material, Includes varitey of 3 Axis CNC Routerer bits, pre loaded software computer and monitor., En3 Axis CNC Routere 3 Cutting software and everything you need to start working., Print to cut technology with multi vision (cut out custom signs after they are printed) , Powered Up and Running!

Specifications Table Size 5' x 12' Number Of Axis 3 Number Of Spindles Single Horsepower 16 (12 kw) Motor Omlat Z-Axis Travel 16" Drive System X and Y axis Rack & Pinion Drive Systen Z axis Ball Screw Controls MultiCam EZ Control Software MasterCam Electrics 220v / 50 or 60 hz Includes 8 - Position Rotary Carousel Tool Changer Automatic Tool Caliberation 2200 inches/minute rapid traverse 12 Meg Memory, RS232 Interface

80" x 144" Fixed table, moving gantry machine in a front-to-back configuration with a 2-zone vacuum table supported by a "MULTICAM" 33 HP 2 stage regeneratine blower vacuum system. Equipped with: (1) 5.5 HP HSK-32 (ER25) 32,000 RPM liquid cooled Columbo Routing spindle variable speed by inverter up to 32,000 RPM.

Description: 60" x 120" Fixed table, moving gantry machine in a front-to-back configuration with a multi-zone vacuum table supported by a 20 HP vacuum system. Equipped with: (1) 5.5 HP Spindle with static tool changer, variable speed by inverter up to 18,000 RPM. Complete with: "I-CUT VISION" system with dongle key and camera also with tangential oscullating knife. Full table coverage on X- & Y-axis, rack & pinion gantry drive with brushless Servo motors using integrated 25 mm linear roller bearing rack system, 8" Z-axis travel via lead screw drive; 1,000 IPM max. cutting feed, 1,700 IPM max. rapid traverse rate on X- & Y-axis. The MULTICAM CNC controller is a stand-alone RISC/DSP system; includes a keypad interface with hot keys for repetitious functions and DNC access to host computer. Memory for instant job replay, 32-bit processor, 12 MB RAM & 2 MB flash memory, interprets HPGL and M & G codes, RS-232 interface for PC communication. Includes: 20 HP MULTICAM "Turbo Vac" and assorted collets & tool holder will be included.

Specifications Table Size 60" x 240" Traveling Gantry - Stationary Style Table Vacuum Table Number Of Spindles 1 Spindle Horsepower 8 @ 32,000 rpm Spindle Mfg. Umbra Group Carousel Auto Tool Changer Controller Multicam Controller Hand Hend Controller Includes Enroute Software (buyer will need to re-register) (2) Vacuum Pumps (1) Additional Spindle

5' x 12' Fixed table, moving gantry machine in a front-to-back configuration with a 4-zone vacuum table supported by a 20 HP vacuum system. Equipped with: (1) 11 HP "HSK" Spindle, variable speed by inverter up to 24,000 RPM, ER25 collet and automatic tool calibration.

Specifications 80"x144" Table 4 Zone Vacuum Table 20HP Elmo Vacuum Pump 6" Z Axis Clearance, 12" Z Axis Travel 7.5HP Colombo Spindle 24000 RPM 1200 IPM Rapids 208V 3 Phase Servo Drives

Used Multicam CNC Router New in 2006 4'x8' Table 5.5HP Spindle with 6 Station ATC Servo Drives Multicam PD Vacuum Pump 4 Zone Vacuum Table Includes Dust Collector BobCad V21 Software This machine is currently powered up and running (see video)

Used Multicam 3000 Series CNC 3 Axis CNC Routerer, New in 2007, Model 3305-R, , 80"x144" Table, 4 Zone Vacuum Table, 20HP Elmo Vacuum Pump, 6" Z Axis Clearance, 12" Z Axis Travel, 7.5HP Colombo Spindle 24000 RPM, 1200 IPM Rapids, 208V 3 Phase, Servo Drives, MULTICAM EZ CONTROL WITH HANDHELD KEYPAD INTERFACE, MULTICAM SUITE 4 OFFLINE CNC CUTTING SOLUTIONS SOFTWARE, Includes En3 Axis CNC Routere 4 Basic Software, Powered up and running, Location: Ontario Canada, Description: Used Multicam 3000 Series CNC Router, 80"x144" Table, 7.5HP Spindle, 20HP Vacuum Pump, dust Collector, New in 2007 Specification: Used Multicam 3000 Series CNC Router New in 2007 Model 3305-R 80"x144" Table 4 Zone Vacuum Table 20HP Elmo Vacuum Pump 6" Z Axis Clearance, 12" Z Axis Travel 7.5HP Colombo Spindle 24000 RPM 1200 IPM Rapids 208V 3 Phase Servo Drives MULTICAM EZ CONTROL WITH HANDHELD KEYPAD INTERFACE MULTICAM SUITE 4 OFFLINE CNC CUTTING SOLUTIONS SOFTWARE