Leister Hemtek ST - 157.860

We are selling a used high-frequency plastic welder HF - 5000, manufacturer ELKON, year of manufacture 2006. It is used for welding technical plastics or plastic-coated textiles. Inspection in operation under power is possible by prior arrangement. It includes 3 electrodes - flat 5 mm, double 2x5 mm (50 mm spacing), and a cutting knife. Requirements for operation: 380 V power supply, compressed air connection. Consumables: teflon mesh under the electrode (approx. once a year). Technical parameters: Table dimensions: 2500 x 1000 mm Output power: 6 kW Power supply: 10 kW Operating frequency: 27.12 MHz Working pressure: max. 0.63 MPa. Machine dimensions: Width: 800 mm Length: 800 mm Height: 1700 mm.

The weber ultrasonic saphir digital station is used for ultrasound welding. The system will be sold as shown in the pictures with machine table and workpiece mounting. Frequency 35kHz, power 1000W, 230V AC (Schuko-plug), Sonotrode TR35Ti, Min Force 30N, Max Force 380N The touchpanel has minor defect, but the use is not impaired. Logistics must be handled by the buyer. Sold under exclusion of any warranty.

KLN Linear Vibration Welder LVW 2046-40E Manufacturer: KLN Ultraschall Model: LVW 2046-40E Year of Construction: 2007 Power Supply: 400 volts x 3 phase Rated Current: 25 Amp Max Operating Pressure: 100 bar Performance: 17KW Welding Surface Area: Up to 300 cm² Lift Table Dimensions: 1000 x 500 mm Vibration Frequency: 150-260 Hz Amplitude: 0.35-1.3 (0.7-2.6) Tool Holder Dimensions (Upper Tool): 760 x 310 mm Tool Holder Dimensions (Lift Table): 1000 x 500 mm Process Power: 19.8 kN Maximum Top Tool Weight: 50 Kg Touchpanel Unit Size: 7 inches Noise Emission: <78 dBa Compressed Air Connection: Minimum 5 Bar Lift Table Drive: Hydraulic/Servo-electric Technical Condition: As-is, where-is State: Visible but unplugged Note: This unit has been yearly serviced by Branson.

Branson M-402H Plastic Welder Manufacturer: Branson Model: M-402H Year of Construction: 2004 Technical Condition: As-is, where-is State: Visible but unplugged Weight: 3400 KGS Power Supply: 415 Volts x 3 Phase Input Power: 23 kVA @ 33 Amps Hydraulic Lift Table Dimensions: 800 mm x 400 mm (31.5" x 15.75") Weld Plane Area: 150 cm² Upper Tool Weight: 15 kg – 25 kg (33# – 55#) Vibration Amplitude: 0.9 mm – 1.8 mm Frequency Range: 180 – 240 Hz Clamping Force: 15 kN Drive System: Branson M series two phase digital drive Control System: Allen Bradley Compulogix PLC (standard) PLC/VC100 Control This unit has been yearly serviced by Branson Welders.

Branson M-622H Vibration Plastic Welder Manufacturer: Branson Model: M-622H Year of Construction: 2004 Technical Condition: As-is, where-is State: Visible but unplugged Input Power: 415 Volts, 3 Phase Input Power Rating: 23 kVA @ 33 Amps Engine Power: 33.6 HP Weight: 4600 KG Dimensions: - Length: 2820 mm - Width: 1728 mm - Height: 2260 mm Hydraulic Lift Table: - Size: 52” x 21” - Stroke: 20” (variable to 10”/second) - Daylight: 29-1/2” (without fixture plates) Welding Surface Area: 500 cm² Upper Tool Weight: 77# – 143# Frequency Inverter: Vectron, 80 – 120 Hz (low frequency) Control System: Siemens Simatic S7-300 PLC Interface: Allen Bradley Panelview 700 Plus Software: Branson M2 Overall Dimensions: 9’3” x 5’8” x 7’5” high (plus light curtain) This unit has been yearly serviced by Branson Welders.

GEAF 45 kW high-frequency welding and cutting machine. MODEL: TSP 100 - 150/45 2 tables measuring 150 x 100 cm. Hydraulic press for punching after welding. Maximum cutting force: 60 tons. Siemens PLC control. Dimensions of the upper press table supporting the dies: 100 x 150 cm Dimensions of the lower table: 166 x 108 cm Shearing force: 60 tons Generator power: 45 kW Siemens PLC control and touch screen The two side carriages feature covers that allow for the mounting of two different dies on each carriage. The press opening is approximately 170 mm, while the thickness of the carriages is 25 mm. The press closes from top to bottom. We have two identical machines. The tables are moved by rotary oil-pneumatic cylinders connected to an articulated arm. The 60-ton press does not have a heated plate. It is possible to remove the covers from the tables and attach a welding electrode to the upper plate of the press. The PLC program must be modified. The welding electrodes can be positioned either on the work table or on the top cover. When working with the covers on the two carriages, each carriage can operate with two different dies. Additionally, …

The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm

Branson M-502H Plastic Vibration Welder Manufacturer: Branson Model: M-502H Year of Construction: 2005 Technical Condition: Good State: Visible but unplugged Weight: 3960 kg Input Power: 400 Volt x 3 Phase, 23 kVA @ 33 Amps Capacity: 30.0 Engine Power: 25.0 kW (33.6 hp) Hydraulic Lift Table Dimensions: 1020 mm x 540 mm (40" x 21.6") Weld Plane Area: 200 cm² Upper Tool Weight: 15-30 kg Vibration Amplitude: 0.9 mm – 1.8 mm Vibration Frequency: 180 – 240 Hz Clamping Force: 18 kN Control System: PLC/VC100 control Drive Type: Branson M series two phase digital drive Weld by Distance Feature: Yes Operator Access: Front/rear (pass through) Dimensions: 7-1/2" x 5-1/2" x 7-1/2" high Maintenance: This unit has been yearly serviced by Branson This Branson M-502H Plastic Vibration Welder is designed for efficient joining applications, featuring advanced technology and robust construction for reliable performance.

The weber ultrasonic saphir digital is used for inline automated ultrasonic welding. This is sold without the automation line. Frequency 35kHz, power 1000W, 230V AC, Sonotrode TR35Ti Machine was used do porduce roughly 90000units. Logistics must be handled by the buyer. Sold under exclusion of any warranty.

Characteristic: Control system: IMATIC S7 1200 Power input: 9.2 kW Equipment: Safety relay Light barrier

Single head welding machine - ELUMATEC crushed arms and wrinkled one piece of cover Year: 2003

GSM Fixy 2400 semi-automatic ultrasonic rhinestone and studs application machine, double head, including accessories ( discs and tips). Need of compressor.

Automatic machine for the production of FFP2 masks (flat model). This model (called "fish") is more practical than the classic beak model and provides a better seal on the face with greater comfort. The machine, made in China, is extremely well built. The wiring of the PLCs is also very accurate. Setup is simple, and the manufacturer provides direct assistance. The machine does not apply the elastics to the masks, so you can choose whether to wear the elastics behind the ears or those behind the head. It can be combined in cascade with automatic elastic machines. The machine was never used except for initial setup, as we never started production. Power supply: 220V Power used: 3.8 kW Pressure used: 0.6 Mpa Dimensions (length x width x height): 4550 * 920 * 1420mm Weight: 1200 KG Production date: November 2020 Import: January 2021 Production capacity: 60/80 pieces / min Certification: CE / ISO9001: 2015

DUKANE VWB3500 Vibratory Plastic Welding Machine Manufacturer: DUKANE Model: VWB3500 Year of manufacture: 2007 Condition: Excellent Operational status: Under power Pneumatic supply: 90 PSI Control system: Siemens touch control Table dimensions: 965 × 455 mm

Offer Title: SONOPET STRYKER Manufacturer: Sonopet Model: UST 2001 Year of Manufacture: 2024 Included Items: - SONOPET Surgical Device: 7 pcs - STRYKER Medical Imaging Device: 1 pc - Medical Imaging Spare Parts: 2 pcs - STRYKER Imaging Spare Parts: 6 pcs - STRYKER Spare Part Boxes: 10 pcs - Medical Imaging Cables: 25 pcs - STRYKER Straight Micro Diameter: 129 pcs - Additional Medical Imaging Spare Parts: 16 pcs This listing features a comprehensive collection of medical imaging and surgical devices, ensuring a robust offering for healthcare professionals.

Triad Extreme wedge welding system is the most versatile automatic wedge welding system available on the market. Triad Extreme is the optimal solution for companies producing tents, tarpaulins, awnings, flags, banners, banners, coverings, curtains, bags, pipes, etc. Triad Extreme is suitable for welding materials such as PVC, PE, PP, urethanes and others used for welding flexible films. The Triad Extreme device also welds reinforced and unreinforced films of weights 170 - 3400 g/m2. The sealer is designed to be handy and user-friendly. TRIAD EXTREMETM Power Power supply Number of heating wedges Working temperature Max. weight of material to be welded Operation mode Speed control in range 300 W 240 V 1 0-500 °C 3400 g/m2 stationary/mobile 0-10 m/min * 1.5 m sections 480 mm x 280 mm x 250 mm Guide system ** Dimensions (L x H x W)

Machine that joins materials, typically plastics and metals, using high frequency vibrations and applied pressure. Fast and automated process with minimal energy consumption. Condition is very good and is fairly new only slightly used.

Offer Title: MS Ultraschall Technologie GmbH 612435.1 Manufacturer: MS Ultraschall Technologie GmbH Model: 612435.1 Voltage: 3x400-480V AC Power: 4.4 kVA Year of Manufacture: Not specified Technical Condition: Excellent State: Visible