IZO IND.OV-LT

Manufacturer	IZO
Model	IND.OV-LT
Category	Industrial ovens

Thermex waste incinerator

Poland 2008

Inside Length	14000 mm
Inside Height	14000 mm
Engine Power	50 kW

Inside Width	1200 mm
Heating Method	gas
Max Temperature	1250 °C

88,500 €

View product

Cobelcomex Sn.6162 Industrial oven

Poland 1980

Inside Length	22400 mm
Inside Height	440 mm
Max Temperature	698 °C

Inside Width	1000 mm
Heating Method	gas

22,500 €

View product

SCAME FORNI INDUSTRIALI S.p.A 1300/150/3500G.I Industrial oven

Poland 2000

Scame furnace for soldering radiators for sale. Year of manufacture 2000 Technical data: Length 28200 m Width 2736 m Height 2606 m Engine power 130 kW max temp. 1120 degrees Working temperature 1100 degrees Temperature range 850/1100 degrees Belt width 1300 mm max height of soldered elements 150 mm Length of the heating zone 3600 mm Supply voltage 3x400V The furnace after replacement of chamottes, repair of the generator. More information by e-mail.

19,000 €

View product

LINN MDBT 70+24/1040/210/16300 Industrial oven

Poland 2001

Microwave oven for continuous production. Only 300 working hours. MDBT 70+24/1040/210/16300. Siemens S5 controller with alphanumeric panel, hot air preheating and microwave drying, ventilation system for moisture removal, PTFE belt. Entrance opening: approx. 1040 x 210 mm Oven dimensions: height approx. 2400 mm, width about 1900 mm, length about 25 m (can be shortened!). Operating temperature: max. 230 ⁰C Microwave power: (2.45 GHz) about 70 kW. Hot air power: approx. 24 kw Year of manufacture: 2001 I will send detailed technical information to interested parties. Universal device for drying, such as mushrooms, fruits, spices, ceramics, plastics or sludge.

Price on request

View product

ELSKLO GKL 1000 TSCU Industrial oven

Poland 2011

Crucible Furnace. Power supply Gas or fuel oil Hydraulic tilting http://www.elsklo.cz/en/furnaces-catalogue/tilting-gas-fired-crucible-furnaces-for-melting-al-and-cu-alloys.html?fbclid=IwAR00M-ywWJZq4CXa6BAQ0GQH17FvVQd5VMaygtaY010wA-OQ6VI9bd_sijs

19,000 €

View product

FAKO RPW-2900 Industrial oven Hot deal

Poland 2004

Steam boiler type FAKO RPW-2900 prod. year 2004, working pressure 10 bar with gas burner including gas path, all boiler accessories, feed pumps pcs. 2 type CR5-26, flue stack, ZWZ tank, control cabinet, boiler documentation, fully operational.

Price on request

View product

Single chamber vacuum furnace SECO/WARWICK VP

Poland 2024

Inside Length	1500 mm
Inside Height	1700 mm

Inside Width	1700 mm
Max Temperature	1300 °C

Price on request

View product

Herbert Presses (hot retreading of tyres) up to

Germany

Two used but well conditioned Herbert Presses for hot retreading of tires. Usage up to 33".

Price on request

View product

KILN 150x120x140 cm Industrial oven

Poland

Heating Method	electric

Price on request

View product

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine

or contact us

INTERMET EKOMAT II Industrial oven Hot deal

Poland 2011

Sawdust stove INTERMET sawdust stove for sale, power 500 kW, year of production 2011. The stove is perfect for carpentry shops or sawmills where sawdust is the waste. The stove is complete and ready for transport.

Price on request

View product

Bonis Bonis Industrial oven

Lithuania

Bonis Ceramic gas kiln. Inside dimentions - 1100x1100x1400. max 1350 C. Temp.

20,000 €

View product

Elmetherm 27 x 4,4 m Industrial oven

Poland 1997

The ELMETHERM 27 x 4.4 m furnace built in 1997 in France is used for heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter of 8 to 35 mm. The manufacturing process begins with preheating the items in the machine's heating tubes, then vulcanizing and shaping them at 168°C. After this stage, the plastic tubes go to a special cooling tunnel, where they are cooled with air at a temperature of 42.8 ° C. The gas furnace for forming PA ELMETHERM plastic tubes is equipped with conveyors for transporting items between successive stages of the process, thanks to which automated heat treatment of a large number of details is possible. Functions such as switching on heating or cooling are controlled using the SCHNEIDER MAGELIS HMI touch panel. The furnace for plastic pipes weighs about 35 tons. Specification of the gas furnace for plastic pipes ELMETHERM 27x4.4 m - heating temperature: 168 °C - cooling temperature: 42.8 °C - capacity: 10 kg/min - range of heated hose diameters: 8-35 mm - single batch weight: 200 kg - heating time: approx. 20 min - HMI panel: SCHNEIDER MAGELIS - type of gas: GZ 50 …

49,000 €

View product

MDBT 70+24/1040/210/16300 Industrial oven

Poland 2001

Microwave oven MDBT 70+24/1040/210/16300 For continuous production. Siemens S5 controller with alphanumeric panel, hot air preheating and microwave drying, ventilation system for moisture removal, PTFE tape. Entry opening: approx. 1040 x 210 mm Furnace dimensions: height approx. 2400 mm, width approx. 1900 mm, length about 25 m (can be shortened!). working temperature: max. 230⁰C Microwave power: (2.45 GHz) approx. 70 kW Hot air power: approx. 24 kW Year of manufacture: 2001

706,000 €

View product

Electric tunnel furnace for metallization Pyrolysis

Poland

ELECTRIC TUNNEL KILN - PYROLYSIS GLASS METALLIZATION LINE. For sale: a production line for firing glass and decorating mosaics and glass ornaments using pyrolysis. The line has three zones (heating, annealing, and cooling) and a system for spraying metallizing solutions. The kiln can also be used for firing ceramic paints and other applications. Transport is carried out on 38x79 cm frames. Control cabinet with PLC controller. Silicon carbide transport tubes. Available for viewing

Price on request

View product

Babcock Wanson TPC 400 kW Industrial oven Low working hours

Poland 2016

Specifications and technical data of the furnace: Model: TPC 400 B Brand: Babcock Wanson Year of production: 2016 Warranty: 1 more year Design: vertical Power: 400 kW Heatable area: 12.6 m2 Design temperature: 400 ºC Maximum operating temperature: 350 ºC Design pressure: 10 bar Maximum operating pressure: 10 bar Test pressure: 15 bar Coil capacity: 94 dm3 Type of medium: thermal oil Nominal flow rate: 20 m3/h Nominal inlet temperature: 310 ºC Nominal outlet temperature: 340 ºC Thermal efficiency: 87% Boiler pressure loss: 1.15 bar Fuel: LPG Burner control: modulation Maximum fuel consumption: 19 m3/h Minimum fuel pressure: 50 mbar Maximum fuel pressure: 300 mbar Main power supply: 400 V, 50 Hz Auxiliary power supply: 230 V, 50 Hz Installed power: 9.5 kW Weight (empty unit): 920 kg Degree of protection for electric motors: IP55 Degree of protection of the switchboard: IP55 CE mark: B.W.I. Furnace instrumentation: control cabinet + internal regulator. The furnace worked only during the start-up of the plant, about 200h. 100% operational. The company was forced to purchase a furnace with a higher capacity.

Price on request

View product

TERMETAL Oven T6MX2-8-750

Poland 2004

Heating Method	electric

Engine Power	750 kW

25,500 €

View product

Forni Industriali FIBEX COMBI 6GX-10.130-7110.2E.270 Industrial oven

Poland 2007

FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 soldering oven was manufactured in 2007 by the Italian company Forni Industriali Heat Treating Plants. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace for soldering steel elements has a belt speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. The belt furnace was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. Technical data of the furnace for brazing steel elements FIBEX COMBI 6GX-10.130-7110.2E.270 - loading table length: 2000 mm - length of the unloading table: 1700 mm - working length inside the soldering zone: 7100 mm - length of the cooling water jacket: 14,000 mm - natural gas supply with pressure: 20 - 400 mbar - nitrogen supply with pressure: 50-200 mbar - …

110,000 €

View product

OMIA SECOMAT V-10 - Temp 160° Industrial oven

France

Oven / proofer Max. temperature 160° Inside dimensions 1000 x 1000 x 1000 mm Miscellaneous MACHINE IN VERY GOOD CONDITION Machine equipped with 1 small cart Voltage 380 V Width 2000 mm Depth 1500 mm Overall height 2000 mm Weight approx. 1 T

Price on request

View product

FZ 512 Industrial oven Hot deal

Poland

Heating Method	gas

Price on request

View product

Riedhammer TP 12,75/2x20/15-E-145 Cooking tunnel

Austria

We are offering a Riedhammer Pusher-Type Tunnel Kiln, model TP 12,75/2x20/15-E-145, designed for continuous thermal processing of functional ceramics. The unit is fully operational and in excellent condition, having been turned off and unused since 2023. The kiln uses a hydraulic pusher system to move support plates with material through multiple temperature zones, enabling continuous sintering of functional ceramics. It is electrically heated and reaches temperatures up to 1450 °C.

Price on request

View product

FZ 512 Industrial oven Hot deal

Poland

Technical condition: used machine, visual inspection before purchase. Disassembly on the side of the buyer

6,480 €

View product

FZ 512 Industrial oven

Poland

Technical condition: used machine, visual inspection before purchase. Disassembly on the side of the buyer

Price on request

View product

Tiflex IR 80 Industrial oven

Italy

Offer Title: Tiflex IR 80 Industrial Oven Manufacturer: Tiflex Model: IR 80 Year of Manufacture: Not specified Technical Condition: In working conditions State: Visible Location: Ascoli Piceno Type: Used Screen Printing Oven

3,200 €

View product

SAT OVEN Industrial oven

Switzerland

Offer title: SAT OVEN Industrial oven Brand: SAT Manufacturer: SAT Model: OVEN Year of manufacture: Not specified Year of manufacture (approximate): Not specified Technical condition: As-is, where-is Viewable in: Switzerland, 1 hour from Geneva Additional availability: A second oven of the same type may be available at the end of the year Notes: See attached description (in French!) and photos Terms: Ex Works (EXW)

Price on request

View product

LANZINI - STEAM OVEN

Italy

DESCRIPTION: This oven is manufactured to a high cGMP standard in high quality materials, including stainless steel. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: This oven is designed with an accurate and uniform steam distribution between the products for maximum efficiency. Inside the cabinet room there are trolleys with special trays of size 50 x 90 cm made in stainless steel. The Lanzini ovens are particularly suitable for trays with medium load density.

Price on request

View product

MONKIEWICZ Powder Coating Furnace For Fuel Oil Industrial oven

Poland

Monkiewicz Powder Coating Contact Furnace Full Dtr Documentation Technical Condition Of The Machine Is Very Good, Connected, Checked, Factory Paint

Price on request

View product

YERLİ -- Industrial oven

Turkey

8-burner natural gas U-type oven 9-meter hell chamber, total 25-meter furnace chamber suitable for double-sided coating, 15-gun powder booth suitable for single-sided coating, 7-gun powder booth, conveyor lines for furnaces and booths, all equipment was overhauled 6 months ago and has not been used since trial runs were conducted.

1,010 € Price is negotiable

View product

ROYAL GOLD PO1295 Industrial oven

Germany

Inside Length	1200 mm
Inside Height	1650 mm
Engine Power	9 kW

Inside Width	950 mm
Heating Method	electric
Max Temperature	220 °C

8,800 €

View product

ATA 300° C Industrial oven

France

Max temperature 300°C Power 1.5kW Tension 380V Interior dimensions of the oven: Depth 500 x width 295 x Ht 200 mm

Price on request

View product

Star YesOvens - Industrial oven

Romania

Power supply: 400V 3N Power: 18 kW Dimensions (LxWxH): 850x890x1170mm Capacity: 10 trays 600x400mm Distance between trays: 80mm Temperature: +30°/ +280° C Weight: 132 kg Water protection : IPx 4 Stainless steel Digital control touch screen 10" color LCD-TFT LCD color screen Baking with DELTA T Optional: probe for temperature check USB connection Favorite functions YesData, YesTouch, YesClean Self diagnostic system Baking systems: convection, steam, mixed: convection and steam Auto-reverse fan for even heat distribution in 7 speeds Adjustable humidification Internal lighting 999 programs with 10 baking phases Equipped with 3 washing functions Ergonomic handle The oven is in very good condition More details by phone I offer transportation anywhere in the country

6,000 € Price is negotiable

View product

Here is a selection of similar machines - IZO IND.OV-LT

Specifications

Similar machines sold on our website

Are you looking for this machine?