Trustpilot
Categories
Start selling

Account

Log In
Create an account
Trustpilot
Log In
Create an account

Homag KAL 310/7/A20/S2

HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
HOMAG KAL 310/9/A20/S2 P250506194
Manufacturer Homag
Model KAL 310/7/A20/S2
Category Edgebanding - Single-sided edgebanders

Here is a selection of similar machines - HOMAG KAL 310/9/A20/S2

Specifications

Board thickness 60 mm
Edge thickness 20 mm
Feed advance 24 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Length x width x height 10650.0 × 1350.0 × 1850.0
Weight  kg

Similar machines sold on our website

Homag KAL 310 8/A20/S2 edgebander

Homag KAL 310 8/A20/S2 edgebander Sold

DE Germany 2007

Edge thickness 20 mm
Used HOMAG KAL 310/7/A20/S2 Edgebander LIKE NEW!!!

Used HOMAG KAL 310/7/A20/S2 Edgebander LIKE NEW!!! Sold

DE Germany 2005

Feed advance 24 m/min
Glue tank
Sound-proof cabin
Used HOMAG KAL 310/8/A20/S2 Edgebander

Used HOMAG KAL 310/8/A20/S2 Edgebander Sold

IT Italy

Sound-proof cabin
Glue tank
HOMAG KAL 310/7/A20/S2 edgebander

HOMAG KAL 310/7/A20/S2 edgebander Sold

IT Italy

GENERAL CHARACTERISTICS ► Industrial machine with robust construction ► max height. working panel height with straight edge 60 mm ► Applicable banding material in coils: thin edge and PVC up to 3 mm ► Applicable banding material in strips: solid wood up to 20 mm SYSTEM AND PANEL HANDLING OPTIONS ► of Running driving chain ► Top pression unit made by motorized rubbered belt ► Top pression adjustable in height by the control automatically ► Variable speed continuous feeding with regulation in automatic by numerical control ► Input panel guide ► Lateral bar with lines of idle routine panels support UNITS ON THE SQUARING ► Pre milling unit to rectify the side of the panel. E 'consists of 2 motors with automatic in intervention to avoid splinters on the panel - motors power 2.6 to 3.5 kW 8540-11550 (rev / min) GLUING UNIT, INSERTION AND PRESSION OF THE EDGE ► Lamp zone to pre-heat the edge of the panel ► Plate reel holder ► Hot-melt glue and premelter ► Spreading roller to regulate the quantity of glue applied ► Guillotine to cut the edge in coils ► Roller set to press the edge on straight profiles - nr. 1 + …
HOMAG KAL 310/8/A 20/S Gluing machine

HOMAG KAL 310/8/A 20/S Gluing machine Sold

PL Poland

length 1 mm
height 1 mm
width 1 mm
HOMAG KAL 310/7/A20/S2 Edgebander

HOMAG KAL 310/7/A20/S2 Edgebander Sold

IT Italy

Sound-proof cabin Yes
Homag KAL 210/7/A20/S2 edgebander

Homag KAL 210/7/A20/S2 edgebander Sold

CA Canada

length 711.2 mm
height 1574.8 mm
Board thickness 60 mm
Sound-proof cabin Yes
width 1143 mm
weight 1543.52995 kg
Edge thickness 20 mm
Glue tank Yes
Homag KAL 210/7/A20/S2 edgebander

Homag KAL 210/7/A20/S2 edgebander Sold

CA Canada

length 711.2 mm
height 1574.8 mm
Board thickness 60 mm
Sound-proof cabin Yes
width 1143 mm
weight 1543.52995 kg
Edge thickness 20 mm
Glue tank Yes
Homag KAL 210/7/A20/S2 edgebander

Homag KAL 210/7/A20/S2 edgebander Sold

CA Canada

length 711.2 mm
height 1574.8 mm
Board thickness 60 mm
Sound-proof cabin Yes
width 1143 mm
weight 1543.52995 kg
Edge thickness 20 mm
Glue tank Yes
Sell your machines to buyers worldwide
Sell your machines to buyers worldwide

Sell your machines to buyers worldwide

Join 10,000+ companies already selling with us

Reach 500,000+ monthly visitors

Sell faster at a great price

No hidden fees, it's free

Sell your machine
or contact us
HOMAG KAL 210/7/A20/S2 Edgebander

HOMAG KAL 210/7/A20/S2 Edgebander Sold

IT Italy

Min. board width 60 mm
Sound-proof cabin Yes
Engine power 3 kW
Glue tank Yes
Used Homag KAL 310/9/A20/S2 Edgebander

Used Homag KAL 310/9/A20/S2 Edgebander Sold

RU Russia 2007

length 10650 mm
height 1850 mm
Edge thickness 20 mm
Feed advance 25 m/min
width 1350 mm
Board thickness 60 mm
Squaring No
Engine power 34 kW
Used HOMAG KAL 310/7/A20/S2 Edgebander

Used HOMAG KAL 310/7/A20/S2 Edgebander Sold

IT Italy

Board thickness 60 mm
Feed advance 25 m/min
Glue tank
Edge thickness 3 mm
Sound-proof cabin
Used HOMAG KAL 310/7/A20/S2 Edgebander

Used HOMAG KAL 310/7/A20/S2 Edgebander Sold

IT Italy

Board thickness 3 mm
Sound-proof cabin
Min. board width 60 mm
Glue tank
HOMAG KAR 310/8/A20/S2 Single Sided Edgebanders

HOMAG KAR 310/8/A20/S2 Single Sided Edgebanders Sold

IT Italy 2008

Edge thickness 3 mm
Feed advance 18 m/min
Homag Kal 210/7/A20/S2 Edgebander W/Pur Nordson Pur-Blu Melter System

Homag Kal 210/7/A20/S2 Edgebander W/Pur Nordson Pur-Blu Melter System Sold

CA Canada

Used HOMAG KAL 210/7/A20/S2 Edgebander with Pre-Milling & Corner Rounding (4) Motor. Working Capacity: Edge thickness, coiled stock min/max, 0.3 – 3 mm (0.012. – 0.112″), straight edges, min/max. 0.4 – 20 mm (0.016 – 0.788″), panel thickness min/max. 12 – 60 mm (0.472 – 2.362″). Equipped with: Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) – 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments. Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. Edge Magazine Combination: Strip processing and (2) – coil vertical magazine for quick coil changeover. Gluing System A 20: EVA (Hot Melt), Quick Melt hopper feeder & roller applicator (reversible). PUR Nordson Pur-Blu Melter System 1 yr old. Pressure Section “C”: Servo controlled with (1) Large 150 mm dia. driven & (6) idle rollers; automatic servo adjusting pressure zone through program for varying edge thicknesses. Workstations: End Trimming Unit HL 84: KW 0.8 x 2 (HP 1.0 x 2) – 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip. Rough/Pre-Trimming Unit: Top …
Homag KAL 310/7/A20/S2 Used edgebander

Homag KAL 310/7/A20/S2 Used edgebander Sold

US USA 2007

Glue tank Yes
HOMAG KAL 310/9/A20/S2 Edgebander

HOMAG KAL 310/9/A20/S2 Edgebander Sold

IT Italy

Edge thickness 4 mm
Feed advance 24 m/min
Used Homag KAL 310/7/A20/S2 edgebander

Used Homag KAL 310/7/A20/S2 edgebander Sold

DE Germany 2004

Board thickness 60 mm
Feed advance 24 m/min
Glue tank Yes
Edge thickness 5 mm
Sound-proof cabin Yes
Homag KAL 310/7/A20/S2 edgebander

Homag KAL 310/7/A20/S2 edgebander Sold

IT Italy 2008

Board thickness 60 mm
Feed advance 24 m/min
Edge thickness 20 mm
Homag Kal 210/7/A20/S2 Edgebander

Homag Kal 210/7/A20/S2 Edgebander Sold

CA Canada

HOMAG KAL 210/7/A20/S2 … Edgebander with Pre-Milling & Corner Rounding (4) Motor: Working Capacity: Edge thickness, coiled stock min/max, 0.3 – 3 mm (0.012. – 0.112″), straight edges, min/max. 0.4 – 20 mm (0.016 – 0.788″), panel thickness min/max. 12 – 60 mm (0.472 – 2.362″). Equipped with: • Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) – 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments. • Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. • Edge Magazine Combination: Strip processing and (2) – coil vertical magazine for quick coil changeover. • Gluing System A 20: EVA (Hot Melt), Quick Melt hopper feeder & roller applicator (reversible). • Pressure Section “C”: Servo controlled with (1) Large 150 mm dia. driven & (6) idle rollers; automatic servo adjusting pressure zone through program for varying edge thicknesses.Workstations: • End Trimming Unit HL 84: KW 0.8 x 2 (HP 1.0 x 2) – 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip. • Rough/Pre-Trimming Unit: Top & bottom, …
Homag KAL 210/7/A20/S2

Homag KAL 210/7/A20/S2 Sold

CA Canada 2007

Description HOMAG KAL 210/7/A20/S2 ... Production Edgebander with Pre-Milling & Corner Rounding (4) Motor: Refurbished and upgraded in 2018. In addition to the standard EVA glue system the owner purchased newPUR equipment consisting of: Glue Pot, Nordson Pur-Blu Melter, 6 Rieppe application units to apply release ,anti-stick, anti-static and cleaning agent and the Nitrogen/PUR Gluepot Storage Tank system The machine was used for door and typical cabinet parts, and could apply the PUR for today’s seamless glue lines. Setup with 2 gluepots, Standard and a Teflon coated… allowing it to deliver EVA, Polyolefin or PUR. Homag Edgebander Specifications. Working Capacity: Edge thickness, coiled stock min/max, 0.3 - 3 mm (0.012. - 0.112"), straight edges, min/max. 0.4 - 20 mm (0.016 - 0.788"), panel thickness min/max. 12 - 60 mm (0.472 - 2.362"). Equipped with: • Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) - 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments. • Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. • Edge Magazine Combination: Strip processing and (2) - coil vertical magazine for quick coil changeover. • Gluing System A …
Homag KAL 310/9/A20/S2 Edgebander

Homag KAL 310/9/A20/S2 Edgebander Sold

RU Russia 2007

length 10650 mm
height 1850 mm
Edge thickness 20 mm
Feed advance 25 m/min
width 1350 mm
Board thickness 60 mm
Squaring Yes
Engine power 34 kW

Are you looking for this machine?

Contact us