Famad PDFD

Specifications: "Width of the input packet shapers, milling: mm600 "Beam elements adhered mm 40 ÷ 155 "Length of glued elements: mm 170 ÷ 900 "The thickness of the elements adhered MM20 to 70 "Working air pressure: 0.6 MPa "Compressed Air m³ / h about 25 "Working capacity: the cycle. / Min. To 2.5 (bar 6600 mm) "The length of the bonded: mm 4500 ÷ 6600 "Operating Voltage: V AC 3 x 400 + N + PE "The control voltage: 24 V DC

Equipment: 1. Milling-czopiarka DFC 60D with the team administration glue - 2 pcs. 2. The receiving table with table buffer SO + SB. 3. The chain conveyor loop. 4. A pre-obstructive ZWCZ. 5. Press splicing PHSL - s / n 61. 6. The hydraulic unit ZHE - s / n 11579673/009. 7. The pressure vessel glue WAN-CA

Technical Data: "The width of the input packet shapers milling: mm600 "The width of glued elements: 40 ÷ 155 mm "Length of glued elements: mm 170 ÷ 900 "The thickness of the elements adhered to 70 mm20 "Working air pressure: 0.6 MPa "Compressed air: m³ / h about 25 "Productivity Working cykl. / min. To 2.5 (strip 6600 mm) "Length of glued: 4500 ÷ 6600 mm "Operating Voltage: V AC 3 x 400 + N + PE "Control voltage: 24 V DC

The PDFD line consists of two basic components: a milling cutter DFC 60 (where the end faces are processed) and a press for joining the length PHSL, on which the elements are joined into a strip with a length of up to 6.6mb, with the possibility of programming up to eight intersections dividing the strip into sections of the length programmed by the service. Between these basic devices, there are transport devices that simultaneously perform the function of initial plug-in. The presented configuration of the line enables obtaining the maximum efficiency of up to 4500mb / change. The microprocessor control system allows for flexible adjustment of operating parameters to the user's needs. The presented machine has the possibility of machining caloring elements as well as elements for the production of countertops (connected to the dash). The use of a receiving table with automatic feeding of slats onto the PHSL pushing conveyor enables the line to be operated by one, giving the employee elements. The receiving table is equipped with a buffering diaphragm to increase the efficiency and smoothness of work. The line works in an automatic cycle with manual feeding of material. Line components can be assembled in various (agreed …

Equipment: 1. DFC 60D milling-machine with adhesive application unit - 2 pcs 2. Receiving table with SO + SB buffer table. 3. Chain conveyor PTŁ. 4. The assembly of the pre-picking of the SHR. 5. Press to connect to the length of PHSL 6. Hydraulic assembly ZHE 7. WAN-CA pressure tank. The PDFD line consists of two basic components: DFC 60-Slotting Machine Chippers (where the end faces are processed) and the PHSL length joining presses on which the elements are joined into a strip with a length of up to 6.6 m with the possibility of programming up to eight intersections dividing the strip into segments of the length programmed by the service. The presented configuration of the line enables obtaining the maximum efficiency of up to 7200 mb / change. The microprocessor control system allows for flexible adjustment of operating parameters to the user's needs. The presented machine has the possibility of machining caloring elements as well as elements for the production of countertops (connected to the dash). The use of the Reception Table with automatic feeding of strips on the PHSL presses introducing the press allows the line to be operated by one, giving the employee elements. The …