Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
| Clamping force | 420 T |
|---|---|
| Tie bar spacing (H) | 920 mm |
| Shot volume | 1709 cm³ |
| Platen length | 1350 mm |
| Robot interface | |
| Opening of the press | 700 mm |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 920 mm |
| Pressure on material | 1950 bar |
| Platen width | 1350 mm |
| Number of heating zones | 6 |
| Mould size | 350 x 750 |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1170 mm |
| Shot volume | 735 cm³ |
| Robot interface | Euromap 1350/800 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Equipped with robot | Yes |
| Mould size | 250 - 900 |
| Clamping force | 800 T |
|---|---|
| Robot interface |
| Screw diameter | 90 mm |
|---|---|
| Mould size |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 1300 mm |
| Shot volume | 510 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 1000 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Pressure on material | 2050 bar |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 450 |
| Clamping force | 110 T |
|---|---|
| Shot volume | 38 cm³ |
| Bi-metal screw | Yes |
| Opening of the press | 350 mm |
| Screw diameter | 18 mm |
|---|---|
| Pressure on material | 2060 bar |
| Robot interface | |
| Mould size | 250 |
Romania
2005
| Clamping force | 350 T |
|---|---|
| Shot volume | 1145 cm³ |
| Pressure on material | 1482 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Opening of the press | 3501 mm |
| Screw diameter | 70 mm |
|---|---|
| Shot weight | 1145 g |
| Platen length | 1200 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size | 1200 x 1100 |
| Clamping force | 160 T |
|---|---|
| Tie bar spacing (H) | 850 mm |
| Shot volume | 192 cm³ |
| Platen length | 850 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 12 |
| Mould size | 300 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 750 mm |
| Pressure on material | 2400 bar |
| Platen width | 750 mm |
| Equipped with robot | Yes |
| Number of cores | 5 |
| Opening of the press | 600 mm |
| Clamping force | 550 T |
|---|---|
| Equipped with robot | No |
| Number of cores | 0 |
| Mould size |
| Shot volume | 1960 cm³ |
|---|---|
| Robot interface | |
| Number of heating zones | 0 |
France
2010
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 99 cm³ |
| Platen length | 500 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Opening of the press | 400 mm |
| Screw diameter | 30 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 2210 bar |
| Platen width | 450 mm |
| Equipped with robot | No |
| Number of cores | 0 |
| Mould size |
France
2011
| Clamping force | 50 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 45 cm³ |
| Robot interface | |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Pressure on material | 2400 bar |
| Opening of the press | 400 mm |
Romania
2013
| Clamping force | 650 T |
|---|---|
| Equipped with robot | Yes |
| Number of cores | 0 |
| Mould size |
| Shot volume | 4160 cm³ |
|---|---|
| Robot interface | Euromap 67 |
| Number of heating zones | 0 |
Romania
2013
| Clamping force | 400 T |
|---|---|
| Robot interface | Euromap 67 |
| Number of heating zones | 0 |
| Equipped with robot | Yes |
|---|---|
| Number of cores | 0 |
| Mould size |
France
2002
| Clamping force | 40 T |
|---|---|
| Shot volume | 38 cm³ |
| Bi-metal screw | Yes |
| Robot interface | |
| Mould size |
| Screw diameter | 18 mm |
|---|---|
| Pressure on material | 2060 bar |
| Equipped with robot | No |
| Opening of the press | 330 mm |
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 318 cm³ |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Pressure on material | 1595 bar |
| Mould size |
Romania
2013
| Clamping force | 500 T |
|---|---|
| Equipped with robot | Yes |
| Number of cores | 0 |
| Mould size |
| Shot volume | 2480 cm³ |
|---|---|
| Robot interface | Euromap 67 |
| Number of heating zones | 0 |
| Clamping force | 600 T |
|---|---|
| Shot volume | 1500 cm³ |
| Mould size |
| Screw diameter | 70 mm |
|---|---|
| Robot interface |
Poland
1997
| Clamping force | 350 T |
|---|---|
| Tie bar spacing (H) | 735 mm |
| Shot volume | 422 cm³ |
| Pressure on material | 2300 bar |
| Platen width | 1090 mm |
| Robot interface | |
| Opening of the press | 700 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Shot weight | 363 g |
| Platen length | 1080 mm |
| Equipped with robot | No |
| Number of heating zones | 5 |
| Mould size | 250...650 |
Poland
1998
| Clamping force | 600 T |
|---|---|
| Shot weight | 2850 g |
| Mould size |
| Screw diameter | 90 mm |
|---|---|
| Robot interface |
| Clamping force | 80 T |
|---|---|
| Pressure on material | 128 bar |
| Mould size |
| Screw diameter | 25 mm |
|---|---|
| Robot interface |
| Clamping force | 110 T |
|---|---|
| Shot volume | 251 cm³ |
| Mould size |
| Screw diameter | 40 mm |
|---|---|
| Robot interface |
Mexico
1998
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 530 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 330 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 550 mm |
| Shot volume | 99 cm³ |
| Pressure on material | 1450 bar |
| Platen width | 330 mm |
| Equipped with robot | Yes |
| Number of cores | 1 |
| Opening of the press | 950 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 430 mm |
| Shot weight | 89 g |
| Platen length | 550 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 4 |
| Mould size | 180 |
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Shot weight | 56.8 g |
| Platen width | 429.3 mm |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Platen length | 650.2 mm |
| Robot interface |
Mexico
1998
| Clamping force | 600 T |
|---|---|
| Tie bar spacing (H) | 740 mm |
| Shot volume | 208 cm³ |
| Pressure on material | 1430 bar |
| Platen width | 750 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 186 g |
| Platen length | 750 mm |
| Equipped with robot | Yes |
| Opening of the press | 700 mm |
| Clamping force | 400 T |
| Screw diameter | 70 mm |
| Tie bar spacing (H) | 500 mm |
| Tie bar spacing (V) | 1100 mm |
| Shot volume | 1193 cm³ |
| Shot weight | 1000 g |
| Pressure on material | 1960 bar |
| Platen length | 1300 mm |
| Platen width | 1100 mm |
| Bi-metal screw | Yes |
| Equipped with robot | Yes |
| Robot interface | |
| Number of cores | 5 |
| Number of heating zones | 18 |
| Opening of the press | 1000 mm |
| Mould size | |
| ------------------- | |
| Length x width x height | 8600.0 × 2200.0 × 2500.0 |
| Weight | nan kg |
| Clamping force | 400 T |
|---|---|
| Shot weight | 1000 g |
| Screw diameter | 70 mm |
|---|
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 1500 mm |
| Shot volume | 1193 cm³ |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 1080 mm |
| Pressure on material | 2140 bar |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 1300 mm |
| Pressure on material | 1960 bar |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
Malta
Italy
Hungary
Bulgaria
Turkey
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių