Durkopp 274 Lockstitch machine with bottom, needle transport and integrated top roller transport (puller) and with automation of auxiliary operations in the following areas: thread cutting, stitch fixing, lifting the foot after sewing and up/down needle positioning and equipped with an energy-saving drive for 190-240 V, 50/60 Hz integrated in the machine head. The double transport supports the movement of materials under the foot.An energy-saving SERVO motor integrated into the head has been installed. It guarantees quiet and reliable operation and lower electricity consumption. Most importantly, the Durkopp Adler 274 lockstitch machine has a closed lubrication system (no typical oil pan) guarantees less oil consumption, better lubrication of the machine mechanisms and protects the material from dirt. Sewing speed of 5,000 stitches/min. Central lubrication. NOTE: The machine has two knobs for setting the stitch length: one forwards, the other backwards - which is very practical for lockstitching. And this is a solution found only in DURKOPP ADLER machines. At the needle bar, i.e. in the field of vision and work of the seamstress, there are buttons, providing an ergonomic workstation, used for: up/down needle positioning, sewing one stitch at a time, cancelling/enabling lockstitching. The machine requires 6 bar compressed air …