Price on request
Make an offer| Max. tube length | 750 mm |
| Max. tube Ø | 16 mm |
| Bending angle | 195 ° |
| Bending speed | 120 u/mn |
| Engine Power | 2.5 kW |
| ------------------- | |
| Length x width x height | 2000.0 × 920.0 × 1600.0 |
| Weight | 1000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | under power |
| Last availability date | 05/03/2026 |
This SILFAX SE316H is a 3-axis CNC electric tube bending machine manufactured in 2010. It is designed for precise bending of steel and aluminum tubes with a maximum tube length capacity of 750 mm. The machine can handle steel tubes up to 16 mm in diameter and aluminum tubes up to 20 mm in diameter. It features a maximum bending angle of 195° and a bending speed of 120 revolutions per minute, powered by a 2.5 kW engine.
The machine dimensions are 2000 mm in length, 920 mm in width, and 1600 mm in height, with a total weight of approximately 1000 kg. It includes upper and lower tooling options and offers multiple driven axes: the C axis provides a bending stroke of 195° with a repeatability of 0.05°, the Y axis allows linear tube feeding of up to 750 mm with 0.05 mm repeatability, and the B axis enables 360° orientation with a repeatability of 0.05 mm.
Additional movements include tube clamping with jaws and a ruler, gripper clamping, and tool raising and lowering. The CNC control system is a SIEMENS HT6, supporting clockwise bending direction. The machine is equipped with a pneumatic cross table, double jaw clamping cylinder, hollow shaft carriage for collet work, and clamp bottom stop detection.
The base unit is dark grey and features the SILFAX logo prominently. It has two transparent doors on the front, allowing visibility of internal components and wiring. The bending arm is painted yellow and black, and multiple cables and pneumatic tubes are connected between the bending arm and the base unit. A label marked 'CIC 18' is visible on the front door. This setup indicates a well-engineered machine suitable for precise tube bending tasks in industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
3-axis CNC electric tube bender
- Year of manufacture: 2010
- Steel tube capacity max. 16 mm / thickness 2 mm
- Aluminium tube capacity Ø 20 mm
- Min. bending radius 0 mm
- Max. bending radius 50 mm
- Max. tube length 750 mm
- Upper/lower tools
Driven axes :
- C axis: bending stroke 195° - repeatability 0.05° - speed 60 rpm
- Y axis: linear tube feed 750 mm - repeatability 0.05 mm - speed 120 m/min
- B axis: 360° orientation - Repeatability 0.05 mm - Speed 200 rpm
Other movements :
- Clamping: tube, jaws, ruler
- Accompanying rule
- Gripper clamping
- Upper/lower tool raising and lowering
- CNC SIEMENS HT6
- Clockwise bending direction
- Pneumatic cross table
- Profibus slave
- Double jaw clamping cylinder
- Hollow shaft carriage for collet work
- Clamp bottom stop detection
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this SILFAX SE316H CNC tube bender manufactured?
This SILFAX SE316H CNC electric tube bender was manufactured in 2010.
What is the maximum steel tube capacity of the machine?
This machine has a maximum steel tube capacity of 16 mm with a thickness of 2 mm.
What is the maximum diameter for aluminum tubes this equipment can handle?
This equipment can handle aluminum tubes with a maximum diameter of 20 mm.
What are the minimum and maximum bending radii of this CNC tube bender?
This CNC electric tube bender has a minimum bending radius of 0 mm and a maximum bending radius of 50 mm.
What is the maximum tube length supported by the machine?
This machine supports a maximum tube length of 750 mm.
What is the bending stroke and repeatability of this SILFAX SE316H?
This SILFAX SE316H features a C axis with a bending stroke of 195° and a repeatability of 0.05°.
What is the operating speed of the bending axis for this equipment?
This equipment operates at a speed of 60 rpm for the bending axis.
What components are included in the configuration of the machine?
This machine includes pneumatic cross table and double jaw clamping cylinder as part of its configuration.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 24 |
| Last activity | March 5, 2026 |
3-axis CNC electric tube bender
- Year of manufacture: 2010
- Steel tube capacity max. 16 mm / thickness 2 mm
- Aluminium tube capacity Ø 20 mm
- Min. bending radius 0 mm
- Max. bending radius 50 mm
- Max. tube length 750 mm
- Upper/lower tools
Driven axes :
- C axis: bending stroke 195° - repeatability 0.05° - speed 60 rpm
- Y axis: linear tube feed 750 mm - repeatability 0.05 mm - speed 120 m/min
- B axis: 360° orientation - Repeatability 0.05 mm - Speed 200 rpm
Other movements :
- Clamping: tube, jaws, ruler
- Accompanying rule
- Gripper clamping
- Upper/lower tool raising and lowering
- CNC SIEMENS HT6
- Clockwise bending direction
- Pneumatic cross table
- Profibus slave
- Double jaw clamping cylinder
- Hollow shaft carriage for collet work
- Clamp bottom stop detection
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this SILFAX SE316H CNC tube bender manufactured?
This SILFAX SE316H CNC electric tube bender was manufactured in 2010.
What is the maximum steel tube capacity of the machine?
This machine has a maximum steel tube capacity of 16 mm with a thickness of 2 mm.
What is the maximum diameter for aluminum tubes this equipment can handle?
This equipment can handle aluminum tubes with a maximum diameter of 20 mm.
What are the minimum and maximum bending radii of this CNC tube bender?
This CNC electric tube bender has a minimum bending radius of 0 mm and a maximum bending radius of 50 mm.
What is the maximum tube length supported by the machine?
This machine supports a maximum tube length of 750 mm.
What is the bending stroke and repeatability of this SILFAX SE316H?
This SILFAX SE316H features a C axis with a bending stroke of 195° and a repeatability of 0.05°.
What is the operating speed of the bending axis for this equipment?
This equipment operates at a speed of 60 rpm for the bending axis.
What components are included in the configuration of the machine?
This machine includes pneumatic cross table and double jaw clamping cylinder as part of its configuration.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Max. tube length | 750 mm |
| Max. tube Ø | 16 mm |
| Bending angle | 195 ° |
| Bending speed | 120 u/mn |
| Engine Power | 2.5 kW |
| ------------------- | |
| Length x width x height | 2000.0 × 920.0 × 1600.0 |
| Weight | 1000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | under power |
| Last availability date | 05/03/2026 |
This SILFAX SE316H is a 3-axis CNC electric tube bending machine manufactured in 2010. It is designed for precise bending of steel and aluminum tubes with a maximum tube length capacity of 750 mm. The machine can handle steel tubes up to 16 mm in diameter and aluminum tubes up to 20 mm in diameter. It features a maximum bending angle of 195° and a bending speed of 120 revolutions per minute, powered by a 2.5 kW engine.
The machine dimensions are 2000 mm in length, 920 mm in width, and 1600 mm in height, with a total weight of approximately 1000 kg. It includes upper and lower tooling options and offers multiple driven axes: the C axis provides a bending stroke of 195° with a repeatability of 0.05°, the Y axis allows linear tube feeding of up to 750 mm with 0.05 mm repeatability, and the B axis enables 360° orientation with a repeatability of 0.05 mm.
Additional movements include tube clamping with jaws and a ruler, gripper clamping, and tool raising and lowering. The CNC control system is a SIEMENS HT6, supporting clockwise bending direction. The machine is equipped with a pneumatic cross table, double jaw clamping cylinder, hollow shaft carriage for collet work, and clamp bottom stop detection.
The base unit is dark grey and features the SILFAX logo prominently. It has two transparent doors on the front, allowing visibility of internal components and wiring. The bending arm is painted yellow and black, and multiple cables and pneumatic tubes are connected between the bending arm and the base unit. A label marked 'CIC 18' is visible on the front door. This setup indicates a well-engineered machine suitable for precise tube bending tasks in industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 24 |
| Last activity | March 5, 2026 |
3-осно CNC електрическо огъване на тръби SILFAX SE316
3-osá CNC elektrická ohýbačka trubek SILFAX SE316
SILFAX SE316 3-akset CNC-elektrisk rørbukker
SILFAX SE316 Elektrische 3-Achsen-CNC-Rohrbiegemaschine
Ηλεκτρική κάμψη σωλήνων CNC 3 αξόνων SILFAX SE316
SILFAX SE316 3-axis CNC electric tube bender
Dobladora de tubos eléctrica CNC de 3 ejes SILFAX SE316
Cintreuse de tube électrique CNC 3 axes NUMALLIANCE SILFAX SE316
3-osni CNC električni savijač cijevi SILFAX SE316
SILFAX SE316 3 tengelyes CNC elektromos csőhajlító
Curvatubi elettrici CNC a 3 assi SILFAX SE316
SILFAX SE316 3 ašių CNC elektrinis vamzdžių lenkimo aparatas
SILFAX SE316 3-assige CNC elektrische buigmachine
3-osiowa elektryczna giętarka CNC do rur SILFAX SE316
Curvadora de tubos eléctrica CNC de 3 eixos SILFAX SE316
3 axe CNC electrice tub bender SILFAX SE316
SILFAX SE316 3-осевой электрический трубогиб с ЧПУ
3-osni CNC električni savijač cevi SILFAX SE316
SILFAX SE316 3-axlig CNC elektrisk rörbockningsmaskin
3 eksenli CNC elektrikli boru bükücü SILFAX SE316
EN
- Languages
English (GB)