| Manufacturer | Secotherm |
|---|---|
| Model | Secomat |
| Year | 2000 |
| Location | Poland
|
| Category | Drying - kilns, ovens |
| Capacity in m3 | 1000 |
| Fuel | |
| Fans | 27 |
| Fan power | 81 kW |
| Length x width x height | 50000.0 × 7500.0 × 4400.0 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 24/02/2026 |
| Product id | P10128042 |
| Language |
Secotherm Secomat
Použitá sušárna a pec na dřevo Secotherm Secomat
Secotherm Secomat
Secotherm Secomat Gebrauchte Holztrockner
Secotherm Secomat
Secotherm Secomat Used timber drying kiln
Estufa de leña Secotherm Secomat
Fourneau à bois Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Używana suszarnia do drewna Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat Лесосушильная камера
Secotherm Secomat
Secotherm Secomat
İkinci el kereste kurutma fırınları Secotherm Secomat
|
The Secotherm Secomat is a large industrial drying kiln designed for high-capacity drying applications. Manufactured in 2000, this drying chamber measures 50,000 mm in length, 7,500 mm in width, and 4,400 mm in height, providing a total loading space of 1,000 cubic meters.
The drying system comprises nine chambers divided into two groups: Chambers I, II, and III each measure approximately 7.8 m in width, 7.5 m in depth, and 4.4 m in height, while Chambers IV through IX measure 3.8 m in width, 7.5 m in depth, and 4.4 m in height. The chambers are constructed entirely of metal, specifically hardened aluminum alloy, with stainless steel fastening and suspension elements on the doors. The walls, ceiling, and gate consist of self-supporting box-shaped cassettes filled with 100 mm thick mineral wool insulation, and the exterior is covered with trapezoidal aluminum sheets.
Air circulation within the chambers is managed by a total of 27 fans, with 5 fans each in Chambers I, II, and III, and 2 fans each in Chambers IV through IX. Each fan has a power rating of 3.0 kW, contributing to a total installed fan motor power of 81 kW. The fans are reversible and situated above the apparent ceiling in the middle of each chamber, working in conjunction with air ducts equipped with flaps to control air intake and exhaust.
Heating is provided by a set of heaters located on the rear wall opposite the loading gate, with a maximum drying temperature of 85 degrees Celsius. The total heat demand for the entire nine-chamber dryer is approximately 1,754,100 kcal/h (about 2040 kW/h). Electrical supply is configured for 3x380/220 V, N, PE at 50 Hz.
The front loading clearance is secured by a lift-slide gate featuring multiple large vertical doors with hinges and locking mechanisms, allowing access to individual chambers. The exterior metal panels show signs of wear and some dents, indicating previous use. Metal piping or conduit is visible running horizontally above the doors.
Overall, the Secotherm Secomat drying kiln offers a robust, insulated, and sealed drying environment suitable for industrial applications requiring large volume processing with controlled temperature and airflow.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Chamber I-II-III
Dim. ext. chambers
width 7.8 m
depth 7.5 m
height 4.4 m
Chamber IV-V-VI-VII-VIII-IX
Dim. ext. chambers
width 3.8 m
depth 7.5 m
height 4.4 m
Total loading space: 1,000 m3
Number of fans:
5 each in chambers I-II-III
2 each in chambers IV-V-VI-VII-VIII-IX
Efficiency of one fan - 28,000 m3 / h
Fan motor power 3.0 kW
Max drying temperature - 85 degrees C.
Total electric power installed in large dryers - 3x15kW = 45kW
Total electric power installed in small dryers - 6x6kW = 36kW
Total 81 kW
Supply voltage - 3x380 / 220 [V] / N / PE50Hz
Heat demand for the entire nine-chamber dryer max 1,754,100 kcal / h (i.e. about 2040kW / h)
The drying chamber is made entirely of metal - hardened aluminum alloy. The fastening and suspension elements of the door are made of stainless steel. The walls, ceiling and gate are made of repeatable elements - box-shaped cassettes that constitute self-supporting segments of walls, ceiling and gate. They are filled with 100 mm thick mineral wool insulation. From the outside, the dryer is covered with a trapezoidal aluminum sheet.
The chamber is completely sealed. In the middle of the chamber, above the apparent ceiling, there is a set of reversible fans. At the rear wall, opposite the loading gate, a set of heaters is located at the height of the apparent ceiling.
The chamber is equipped with four (six) air ducts closed with flaps, arranged symmetrically on both sides of the fans. Depending on the direction of fan rotation, two (three) of them introduce air into the chamber from the surroundings, while two (three) others release the atmosphere from the chamber. There is a humidification system above or below the radiators. At the back or side of the dryer, there is a service room, to which a pipe with the heating medium from the boiler room is led, as well as an electricity supply cable and a return pipe.
The front wall clearance (loading window) is closed with a lift-slide gate. There are doors in the gate and in the rear wall of the chamber that enable entry and exit from the chamber after closing the gate.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was the last time this Secotherm Secomat was used?
This Secotherm Secomat used timber drying kiln was last used in 2017.
When was this Secotherm Secomat disassembled?
This Secotherm Secomat used timber drying kiln was disassembled in 2020.
Are the structural columns of this timber drying kiln uncut?
This used timber drying kiln includes complete structural columns that are uncut.
What elements were removed from this Secotherm Secomat?
This Secotherm Secomat used timber drying kiln has some elements, such as the roof, that were removed with a crane.
Is this timber drying kiln in good working condition?
This used timber drying kiln is in good working condition, but some parts may require repair or maintenance after being disassembled.
Does this Secotherm Secomat come with a boiler?
This Secotherm Secomat used timber drying kiln does not include a boiler.
What heating options are available for this timber drying kiln?
This used timber drying kiln can be heated using a boiler that previously worked with wooden waste, or it can be connected to a gas or oil boiler.
Where are the components of this Secotherm Secomat stored?
This Secotherm Secomat used timber drying kiln is currently dismantled and stored, with aluminum sheets and doors stored outside, while heaters and control units are in a dry warehouse.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Aug. 6, 2025 |
Chamber I-II-III
Dim. ext. chambers
width 7.8 m
depth 7.5 m
height 4.4 m
Chamber IV-V-VI-VII-VIII-IX
Dim. ext. chambers
width 3.8 m
depth 7.5 m
height 4.4 m
Total loading space: 1,000 m3
Number of fans:
5 each in chambers I-II-III
2 each in chambers IV-V-VI-VII-VIII-IX
Efficiency of one fan - 28,000 m3 / h
Fan motor power 3.0 kW
Max drying temperature - 85 degrees C.
Total electric power installed in large dryers - 3x15kW = 45kW
Total electric power installed in small dryers - 6x6kW = 36kW
Total 81 kW
Supply voltage - 3x380 / 220 [V] / N / PE50Hz
Heat demand for the entire nine-chamber dryer max 1,754,100 kcal / h (i.e. about 2040kW / h)
The drying chamber is made entirely of metal - hardened aluminum alloy. The fastening and suspension elements of the door are made of stainless steel. The walls, ceiling and gate are made of repeatable elements - box-shaped cassettes that constitute self-supporting segments of walls, ceiling and gate. They are filled with 100 mm thick mineral wool insulation. From the outside, the dryer is covered with a trapezoidal aluminum sheet.
The chamber is completely sealed. In the middle of the chamber, above the apparent ceiling, there is a set of reversible fans. At the rear wall, opposite the loading gate, a set of heaters is located at the height of the apparent ceiling.
The chamber is equipped with four (six) air ducts closed with flaps, arranged symmetrically on both sides of the fans. Depending on the direction of fan rotation, two (three) of them introduce air into the chamber from the surroundings, while two (three) others release the atmosphere from the chamber. There is a humidification system above or below the radiators. At the back or side of the dryer, there is a service room, to which a pipe with the heating medium from the boiler room is led, as well as an electricity supply cable and a return pipe.
The front wall clearance (loading window) is closed with a lift-slide gate. There are doors in the gate and in the rear wall of the chamber that enable entry and exit from the chamber after closing the gate.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was the last time this Secotherm Secomat was used?
This Secotherm Secomat used timber drying kiln was last used in 2017.
When was this Secotherm Secomat disassembled?
This Secotherm Secomat used timber drying kiln was disassembled in 2020.
Are the structural columns of this timber drying kiln uncut?
This used timber drying kiln includes complete structural columns that are uncut.
What elements were removed from this Secotherm Secomat?
This Secotherm Secomat used timber drying kiln has some elements, such as the roof, that were removed with a crane.
Is this timber drying kiln in good working condition?
This used timber drying kiln is in good working condition, but some parts may require repair or maintenance after being disassembled.
Does this Secotherm Secomat come with a boiler?
This Secotherm Secomat used timber drying kiln does not include a boiler.
What heating options are available for this timber drying kiln?
This used timber drying kiln can be heated using a boiler that previously worked with wooden waste, or it can be connected to a gas or oil boiler.
Where are the components of this Secotherm Secomat stored?
This Secotherm Secomat used timber drying kiln is currently dismantled and stored, with aluminum sheets and doors stored outside, while heaters and control units are in a dry warehouse.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Drying - kilns, ovens |
| Capacity in m3 | 1000 |
| Fuel | |
| Fans | 27 |
| Fan power | 81 kW |
| Length x width x height | 50000.0 × 7500.0 × 4400.0 |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 24/02/2026 |
| Product id | P10128042 |
| Language |
Secotherm Secomat
Použitá sušárna a pec na dřevo Secotherm Secomat
Secotherm Secomat
Secotherm Secomat Gebrauchte Holztrockner
Secotherm Secomat
Secotherm Secomat Used timber drying kiln
Estufa de leña Secotherm Secomat
Fourneau à bois Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Używana suszarnia do drewna Secotherm Secomat
Secotherm Secomat
Secotherm Secomat
Secotherm Secomat Лесосушильная камера
Secotherm Secomat
Secotherm Secomat
İkinci el kereste kurutma fırınları Secotherm Secomat
|
The Secotherm Secomat is a large industrial drying kiln designed for high-capacity drying applications. Manufactured in 2000, this drying chamber measures 50,000 mm in length, 7,500 mm in width, and 4,400 mm in height, providing a total loading space of 1,000 cubic meters.
The drying system comprises nine chambers divided into two groups: Chambers I, II, and III each measure approximately 7.8 m in width, 7.5 m in depth, and 4.4 m in height, while Chambers IV through IX measure 3.8 m in width, 7.5 m in depth, and 4.4 m in height. The chambers are constructed entirely of metal, specifically hardened aluminum alloy, with stainless steel fastening and suspension elements on the doors. The walls, ceiling, and gate consist of self-supporting box-shaped cassettes filled with 100 mm thick mineral wool insulation, and the exterior is covered with trapezoidal aluminum sheets.
Air circulation within the chambers is managed by a total of 27 fans, with 5 fans each in Chambers I, II, and III, and 2 fans each in Chambers IV through IX. Each fan has a power rating of 3.0 kW, contributing to a total installed fan motor power of 81 kW. The fans are reversible and situated above the apparent ceiling in the middle of each chamber, working in conjunction with air ducts equipped with flaps to control air intake and exhaust.
Heating is provided by a set of heaters located on the rear wall opposite the loading gate, with a maximum drying temperature of 85 degrees Celsius. The total heat demand for the entire nine-chamber dryer is approximately 1,754,100 kcal/h (about 2040 kW/h). Electrical supply is configured for 3x380/220 V, N, PE at 50 Hz.
The front loading clearance is secured by a lift-slide gate featuring multiple large vertical doors with hinges and locking mechanisms, allowing access to individual chambers. The exterior metal panels show signs of wear and some dents, indicating previous use. Metal piping or conduit is visible running horizontally above the doors.
Overall, the Secotherm Secomat drying kiln offers a robust, insulated, and sealed drying environment suitable for industrial applications requiring large volume processing with controlled temperature and airflow.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | Aug. 6, 2025 |
EN
- Languages
English (GB)