Contact us to receive an offer.
| Manufacturer | SCM |
|---|---|
| Model | OLIMPIC K800 |
| Year | 2016 |
| Location | Lithuania
|
The SCM OLIMPIC K800 is a single-sided industrial edgebander manufactured in 2016, designed for efficient and precise edge processing. It supports edge capacities ranging from 0.4 to 8 mm (0.016 to 5/16") for strip feeding, and panel sizes with a minimum width of 50 mm (2-3/8") and length of 140 mm (5-1/2"). The panel thickness range is between 8 mm and 60 mm (3/8" to 2-3/8").
This machine is equipped with an adjustable in-feed fence that is manually preset, featuring a digital indicator and a pneumatic panel spacing device for accurate positioning. The pre-milling station includes two spindles, each with 3.0 HP motors running at 12,000 RPM, with PLC-controlled jump action and manual digital indicator positioning.
It features an automatic strip and coil feed magazine suitable for straight edges, complemented by a 3 mm guillotine for coil cutting. The gluing station utilizes EVA (Hot Melt) glue with a Teflon-coated glue tank and a quick-disconnect system for rapid glue tank changes, requiring approximately 10 minutes for heat-up.
The pressure section is servo motor-positioned and includes four pressure rollers, with the first roller being larger, Teflon-coated, and powered. Workstations consist of an end trimming station with front and rear motors (0.5 HP each at 12,000 RPM) mounted on THK guides, capable of swiveling between 0° and 15° with rapid setup for angled cutting.
Additional trimming units include a flush trimming unit (top and bottom) with two 1.0 HP motors at 12,000 RPM, a programmable bevel/radius trimming unit with servo motor positioning and two 1.0 HP motors, and a corner rounding/trimming unit with two 0.8 HP motors for top and bottom trimming of linear or vertical corners on all four sides.
The profile scraping unit "RAS/1000" offers top and bottom scraping with two indexed manual presets and large diameter copy wheels for maximum accuracy, including pneumatic in/out positioning. The glue scraping unit "RC-V" features top and bottom flat glue scrapers with pneumatic positioning and an air-blow off nozzle to maintain knife cleanliness.
For finishing, the buffing unit "SPN" includes top and bottom oscillating motors (0.25 HP each at 3,000 RPM) with tilting capability up to 12°, and a hot air unit with a single blower provides adjustable heat range and directional heat shielding for top and bottom coverage, helping to restore color luster on thick PVC edging materials.
The operator interface is a Startouch controller with a 12" color touch screen that swivels 270° at the in-feed side. It can store 100 programs, with six accessible via a single key, and offers graphical display of all working units, production data tracking, diagnostic information, and maintenance monitoring.
Additional features include feed speeds of 36 and 52 feet per minute, a 2.5 HP feed drive motor with a 200 Hz frequency inverter for all trimming units, an electronically programmable hold-down pressure beam, a lighted safety and sound enclosure cover, and outboard panel support. The actual model is OLIMPIC K 800 T-FR2.
The machine comes with two glue tanks plus one spare glue tank. It is a large industrial edgebander with multiple ventilation hoses attached on top. The brand name "SCM" and model "OLIMPIC K 800" are visible on the side. The control panel includes a display and hand wheel located on the left side of the machine. The unit appears to be used but is in decent physical condition with some signs of wear.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
W/PRE-MILL & CORNER ROUNDING
Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2
2 glue tanks + 1 glue tank for spare parts
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Nov. 21, 2025 |
W/PRE-MILL & CORNER ROUNDING
Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2
2 glue tanks + 1 glue tank for spare parts
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The SCM OLIMPIC K800 is a single-sided industrial edgebander manufactured in 2016, designed for efficient and precise edge processing. It supports edge capacities ranging from 0.4 to 8 mm (0.016 to 5/16") for strip feeding, and panel sizes with a minimum width of 50 mm (2-3/8") and length of 140 mm (5-1/2"). The panel thickness range is between 8 mm and 60 mm (3/8" to 2-3/8").
This machine is equipped with an adjustable in-feed fence that is manually preset, featuring a digital indicator and a pneumatic panel spacing device for accurate positioning. The pre-milling station includes two spindles, each with 3.0 HP motors running at 12,000 RPM, with PLC-controlled jump action and manual digital indicator positioning.
It features an automatic strip and coil feed magazine suitable for straight edges, complemented by a 3 mm guillotine for coil cutting. The gluing station utilizes EVA (Hot Melt) glue with a Teflon-coated glue tank and a quick-disconnect system for rapid glue tank changes, requiring approximately 10 minutes for heat-up.
The pressure section is servo motor-positioned and includes four pressure rollers, with the first roller being larger, Teflon-coated, and powered. Workstations consist of an end trimming station with front and rear motors (0.5 HP each at 12,000 RPM) mounted on THK guides, capable of swiveling between 0° and 15° with rapid setup for angled cutting.
Additional trimming units include a flush trimming unit (top and bottom) with two 1.0 HP motors at 12,000 RPM, a programmable bevel/radius trimming unit with servo motor positioning and two 1.0 HP motors, and a corner rounding/trimming unit with two 0.8 HP motors for top and bottom trimming of linear or vertical corners on all four sides.
The profile scraping unit "RAS/1000" offers top and bottom scraping with two indexed manual presets and large diameter copy wheels for maximum accuracy, including pneumatic in/out positioning. The glue scraping unit "RC-V" features top and bottom flat glue scrapers with pneumatic positioning and an air-blow off nozzle to maintain knife cleanliness.
For finishing, the buffing unit "SPN" includes top and bottom oscillating motors (0.25 HP each at 3,000 RPM) with tilting capability up to 12°, and a hot air unit with a single blower provides adjustable heat range and directional heat shielding for top and bottom coverage, helping to restore color luster on thick PVC edging materials.
The operator interface is a Startouch controller with a 12" color touch screen that swivels 270° at the in-feed side. It can store 100 programs, with six accessible via a single key, and offers graphical display of all working units, production data tracking, diagnostic information, and maintenance monitoring.
Additional features include feed speeds of 36 and 52 feet per minute, a 2.5 HP feed drive motor with a 200 Hz frequency inverter for all trimming units, an electronically programmable hold-down pressure beam, a lighted safety and sound enclosure cover, and outboard panel support. The actual model is OLIMPIC K 800 T-FR2.
The machine comes with two glue tanks plus one spare glue tank. It is a large industrial edgebander with multiple ventilation hoses attached on top. The brand name "SCM" and model "OLIMPIC K 800" are visible on the side. The control panel includes a display and hand wheel located on the left side of the machine. The unit appears to be used but is in decent physical condition with some signs of wear.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Nov. 21, 2025 |
кантираща машина SCM OLIMPIC K800
Dýhovačka SCM OLIMPIC K800
SCM OLIMPIC K800 kantbånd
SCM OLIMPIC K800 Kantenanleimmaschine
edgebander SCM OLIMPIC K800
SCM OLIMPIC K800 Single sided edgebander
Canteadora unilateral SCM OLIMPIC K800
Plaqueuse de chants unilatérale SCM OLIMPIC K800
rubna traka SCM OLIMPIC K800
SCM OLIMPIC K800 élszalag
Bordatrice monolaterale SCM OLIMPIC K800
krašto juosta SCM OLIMPIC K800
SCM OLIMPIC K800 kantenaanlijmer
Używana okleiniarka SCM OLIMPIC K800
bordadeira SCM OLIMPIC K800
placator de canturi SCM OLIMPIC K800
SCM OLIMPIC K800 Кромкооблицовочный станок - односторонний
ivica SCM OLIMPIC K800
SCM OLIMPIC K800 kantbandare
Kenar bantlama makinesi SCM OLIMPIC K800
EN
- Languages
English (GB)