Contact us to receive an offer.
| Manufacturer | SCHLATTER |
|---|---|
| Model | ZM 3/V |
| Year | 1978 |
| Location | Austria
|
This SCHLATTER ZM 3/V is a large industrial lathe machine designed for machining cylindrical workpieces. Manufactured in 1978, the machine measures approximately 5000 mm in length, 1400 mm in width, and 1400 mm in height, and it weighs around 3000 kg. It offers a maximum workpiece length of 2930 mm and can accommodate workpieces with diameters ranging from 50 mm up to a maximum of 280 mm. The lathe is equipped with a spindle capable of speeds between 63 and 1300 rpm, featuring a taper MK 4 and a stroke of 85 mm. The total power requirement for operation is 5.6 kW.
The machine includes a headstock positioned on the left side and a tailstock on the right, each fitted with manual handwheels for precise manual control. Two blue steady rests are mounted along the bed to support long workpieces during machining; these rests have cylindrical rollers designed for round workpieces. The steady rests and bed exhibit signs of wear, including chipped paint, surface rust, and accumulated dirt, which is also visible on the base and headstock housing. The headstock includes a chuck mounted on the spindle and features a control panel with buttons, switches, and an emergency stop button located near it.
Electrical cables are connected to the motor on the tailstock side and to the steady rests. Overall, the machine shows signs of surface rust and wear typical for its age, especially on the bed, base, steady rests, and headstock housing. This lathe is suitable for heavy-duty machining tasks requiring support for long and relatively heavy workpieces, with a maximum workpiece weight capacity of 1500 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
max. workpiece diameter 280 mm
min. workpiece diameter 50 mm
workpiece length 2930 mm
Speed of boring spindles 63 - 1300 U/min.
taper MK 4
stroke 85 mm
total power requirement 5,6 kW
weight of the machine ca. 3 t
dimensions of the machine ca. 5 x 1,4 x 1,4 m
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 21 |
| Last activity | Nov. 6, 2026 |
max. workpiece diameter 280 mm
min. workpiece diameter 50 mm
workpiece length 2930 mm
Speed of boring spindles 63 - 1300 U/min.
taper MK 4
stroke 85 mm
total power requirement 5,6 kW
weight of the machine ca. 3 t
dimensions of the machine ca. 5 x 1,4 x 1,4 m
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This SCHLATTER ZM 3/V is a large industrial lathe machine designed for machining cylindrical workpieces. Manufactured in 1978, the machine measures approximately 5000 mm in length, 1400 mm in width, and 1400 mm in height, and it weighs around 3000 kg. It offers a maximum workpiece length of 2930 mm and can accommodate workpieces with diameters ranging from 50 mm up to a maximum of 280 mm. The lathe is equipped with a spindle capable of speeds between 63 and 1300 rpm, featuring a taper MK 4 and a stroke of 85 mm. The total power requirement for operation is 5.6 kW.
The machine includes a headstock positioned on the left side and a tailstock on the right, each fitted with manual handwheels for precise manual control. Two blue steady rests are mounted along the bed to support long workpieces during machining; these rests have cylindrical rollers designed for round workpieces. The steady rests and bed exhibit signs of wear, including chipped paint, surface rust, and accumulated dirt, which is also visible on the base and headstock housing. The headstock includes a chuck mounted on the spindle and features a control panel with buttons, switches, and an emergency stop button located near it.
Electrical cables are connected to the motor on the tailstock side and to the steady rests. Overall, the machine shows signs of surface rust and wear typical for its age, especially on the bed, base, steady rests, and headstock housing. This lathe is suitable for heavy-duty machining tasks requiring support for long and relatively heavy workpieces, with a maximum workpiece weight capacity of 1500 kg.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 21 |
| Last activity | Nov. 6, 2026 |
Линия за рязане / линия за рязане по дължина SCHLATTER ZM 3/V
Řezací linka / linka s podélným řezem SCHLATTER ZM 3/V
SCHLATTER ZM 3/V Opskæring line / Skær til længde linje
SCHLATTER ZM 3/V Zentriermaschine
Γραμμή κοπής / Γραμμή κοπής σε μήκος SCHLATTER ZM 3/V
SCHLATTER ZM 3/V Centering Machine
Línea de corte transversal SCHLATTER ZM 3/V
Ligne de refendage SCHLATTER ZM 3/V
Linija za rezanje / Linija za rezanje na duljinu SCHLATTER ZM 3/V
SCHLATTER ZM 3/V Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio SCHLATTER ZM 3/V
Pjaustymo linija / Iškirpti iki ilgio linijos SCHLATTER ZM 3/V
SCHLATTER ZM 3/V Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm SCHLATTER ZM 3/V
Linha de corte / Linha de corte no comprimento SCHLATTER ZM 3/V
Linie de tăiere / Linie de tăiere la lungime SCHLATTER ZM 3/V
SCHLATTER ZM 3/V Линия продольной резки
Linija sečenja / linija sečenja na dužinu SCHLATTER ZM 3/V
SCHLATTER ZM 3/V Klipplina / Klipp till längdlinjen
Dilme hattı SCHLATTER ZM 3/V
EN
- Languages
English (GB)