| Manufacturer | Salvagnini |
|---|---|
| Model | P2 LEAN - 2120 |
| Year | 2021 |
| Location | France
|
Salvagnini P2 LEAN - 2120 sheet metal panel bending machine, manufactured in 2021. The machine has a working length of 2,180 mm and a listed maximum sheet thickness of 4.0 mm. The current description specifies processing capacity of up to 3.2 mm in mild steel, 2.5 mm in stainless steel and 4.0 mm in aluminium. Listed machine weight is 13,000 kg.
The machine is equipped with Salvagnini FACE.P control and an ABA45/30 automatic blank holder. Included tooling and equipment are listed as LS1P upper blade, LIP lower blade, CLA/SIM auxiliary bending system, UCS1060G25 gooseneck tools, an SFE ball-transfer worktable, MAC 2.0 material correction, DPR barcode/QR/Data Matrix reader and automatic sheet positioning. The visible operator station has a display, keyboard and control buttons. Ball-transfer units cover the front worktable, with segmented bending tooling beneath the machine head.
Additional listed specifications include a maximum sheet length of 2,495 mm, maximum sheet width of 1,600 mm, maximum sheet diagonal of 2,500 mm, maximum bending height of 203 mm and bending angle range of -135° to +135°. Operating hours are stated as 12,143 h (May 2026). Electrical and utility requirements are listed as 400 V / 50 Hz, 16 kVA connected power without an isolation transformer, compressed air at 6–10 bar and average power consumption of approximately 3 kW.
According to the seller, the machine was operational before professional dismantling and preparation for transport by SALVAGNINI technicians in May 2026. It is currently disconnected and ready for collection; professional installation and recommissioning by SALVAGNINI technicians are required. A CE Declaration of Conformity, original technical documentation and SALVAGNINI intervention reports are stated to be available. The machine has protective wrapping on upper panels and protective material along parts of the worktable edge. Minor surface marks and scuffs are visible on some exterior panels.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Press brake manufactured in 2021. This Salvagnini P2 LEAN - 2120 automatic panel bending machine features a maximum bending length of 2,180 mm and can process sheet metal up to 3.2 mm in mild steel, 2.5 mm in stainless steel, and 4.0 mm in aluminium. It includes advanced features such as Salvagnini FACE.P control and an ABA45/30 automatic blank holder. If you are looking to get high-quality bending capabilities, consider the Salvagnini P2 LEAN - 2120 machine we have for sale. Contact us for further details.Control unit: Salvagnini FACE.P
Operating hours: 12,143 h (May 2026)
Technical specifications:
Maximum sheet length: 2,495 mm
Maximum sheet width: 1,600 mm
Maximum sheet diagonal: 2,500 mm
Maximum bending height: 203 mm
Sheet thickness (mild steel): 0.4–3.2 mm
Maximum sheet thickness (stainless steel): 2.5 mm
Maximum sheet thickness (aluminium): 4.0 mm
Bending angle range: -135° to +135°
Machine configuration / included equipment:
Automatic blank holder: ABA45/30 (blank holder length up to 2,180 mm)
Bending tools: LS1P upper blade, LIP lower blade
CLA/SIM auxiliary bending system
UCS1060G25 gooseneck tools
Worktable: SFE ball transfer table
Material correction: MAC 2.0
Data reader: DPR (Barcode / QR / Data Matrix)
Automatic sheet positioning
Utilities:
Power supply: 400 V / 50 Hz
Connected power: 16 kVA (without isolation transformer)
Average power consumption: approx. 3 kW
Compressed air pressure: 6–10 bar
Compliance and documentation:
CE Declaration of Conformity: available
Original technical documentation and SALVAGNINI intervention reports: available
Condition and status:
According to the seller, fully operational before professional dismantling and preparation for transport by SALVAGNINI technicians (May 2026)
Currently disconnected and ready for collection
Professional installation and recommissioning by SALVAGNINI technicians required
Bending Length: 2180 mm
Machine Weight: 13000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2057 |
| Last activity | Nov. 12, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Press brake manufactured in 2021. This Salvagnini P2 LEAN - 2120 automatic panel bending machine features a maximum bending length of 2,180 mm and can process sheet metal up to 3.2 mm in mild steel, 2.5 mm in stainless steel, and 4.0 mm in aluminium. It includes advanced features such as Salvagnini FACE.P control and an ABA45/30 automatic blank holder. If you are looking to get high-quality bending capabilities, consider the Salvagnini P2 LEAN - 2120 machine we have for sale. Contact us for further details.Control unit: Salvagnini FACE.P
Operating hours: 12,143 h (May 2026)
Technical specifications:
Maximum sheet length: 2,495 mm
Maximum sheet width: 1,600 mm
Maximum sheet diagonal: 2,500 mm
Maximum bending height: 203 mm
Sheet thickness (mild steel): 0.4–3.2 mm
Maximum sheet thickness (stainless steel): 2.5 mm
Maximum sheet thickness (aluminium): 4.0 mm
Bending angle range: -135° to +135°
Machine configuration / included equipment:
Automatic blank holder: ABA45/30 (blank holder length up to 2,180 mm)
Bending tools: LS1P upper blade, LIP lower blade
CLA/SIM auxiliary bending system
UCS1060G25 gooseneck tools
Worktable: SFE ball transfer table
Material correction: MAC 2.0
Data reader: DPR (Barcode / QR / Data Matrix)
Automatic sheet positioning
Utilities:
Power supply: 400 V / 50 Hz
Connected power: 16 kVA (without isolation transformer)
Average power consumption: approx. 3 kW
Compressed air pressure: 6–10 bar
Compliance and documentation:
CE Declaration of Conformity: available
Original technical documentation and SALVAGNINI intervention reports: available
Condition and status:
According to the seller, fully operational before professional dismantling and preparation for transport by SALVAGNINI technicians (May 2026)
Currently disconnected and ready for collection
Professional installation and recommissioning by SALVAGNINI technicians required
Bending Length: 2180 mm
Machine Weight: 13000 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Salvagnini P2 LEAN - 2120 sheet metal panel bending machine, manufactured in 2021. The machine has a working length of 2,180 mm and a listed maximum sheet thickness of 4.0 mm. The current description specifies processing capacity of up to 3.2 mm in mild steel, 2.5 mm in stainless steel and 4.0 mm in aluminium. Listed machine weight is 13,000 kg.
The machine is equipped with Salvagnini FACE.P control and an ABA45/30 automatic blank holder. Included tooling and equipment are listed as LS1P upper blade, LIP lower blade, CLA/SIM auxiliary bending system, UCS1060G25 gooseneck tools, an SFE ball-transfer worktable, MAC 2.0 material correction, DPR barcode/QR/Data Matrix reader and automatic sheet positioning. The visible operator station has a display, keyboard and control buttons. Ball-transfer units cover the front worktable, with segmented bending tooling beneath the machine head.
Additional listed specifications include a maximum sheet length of 2,495 mm, maximum sheet width of 1,600 mm, maximum sheet diagonal of 2,500 mm, maximum bending height of 203 mm and bending angle range of -135° to +135°. Operating hours are stated as 12,143 h (May 2026). Electrical and utility requirements are listed as 400 V / 50 Hz, 16 kVA connected power without an isolation transformer, compressed air at 6–10 bar and average power consumption of approximately 3 kW.
According to the seller, the machine was operational before professional dismantling and preparation for transport by SALVAGNINI technicians in May 2026. It is currently disconnected and ready for collection; professional installation and recommissioning by SALVAGNINI technicians are required. A CE Declaration of Conformity, original technical documentation and SALVAGNINI intervention reports are stated to be available. The machine has protective wrapping on upper panels and protective material along parts of the worktable edge. Minor surface marks and scuffs are visible on some exterior panels.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2057 |
| Last activity | Nov. 12, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Фалцогибна машина Salvagnini P2 LEAN - 2120
Ohýbačky plechu Salvagnini P2 LEAN - 2120
Salvagnini P2 LEAN - 2120 Svingbukningsmaskine
Salvagnini P2 LEAN - 2120 Schwenkbiegemaschine
Μηχανή δίπλωσης λαμαρίνας Salvagnini P2 LEAN - 2120
Salvagnini P2 LEAN - 2120 Sheet metal folding machine
Plegadora de chapa Salvagnini P2 LEAN - 2120
Plieuse à tablier Salvagnini P2 LEAN - 2120
Savijač lima Salvagnini P2 LEAN - 2120
Salvagnini P2 LEAN - 2120 Lemezhajlító gép
Piegatrice di lamiera Salvagnini P2 LEAN - 2120
Salvagnini P2 LEAN - 2120 Skardos lankstymo staklės
Salvagnini P2 LEAN - 2120 Zwenkbuigmachine
Zaginarka do blachy Salvagnini P2 LEAN - 2120
Dobradeira de chapa Salvagnini P2 LEAN - 2120
Mașină de îndoire a tablei Salvagnini P2 LEAN - 2120
Salvagnini P2 LEAN - 2120 Фальцегибочная машина
Savijač lima Salvagnini P2 LEAN - 2120
Salvagnini P2 LEAN - 2120 Svängbockningsmaskiner
Sac katlama makinesi Salvagnini P2 LEAN - 2120
EN
- Languages
English (GB)