| Manufacturer | SACHMAN |
|---|---|
| Model | RP3 |
| Year | |
| Location | Italy
|
Summary
This listing is for a milling machine, Type: Fixed Bench, Brand: SACHMAN, Model: RP3. The unit is presented as a bench-style milling machine intended for general milling tasks; no numeric specifications (year, power, capacities, dimensions, hours) are provided in the listing.
Description
The SACHMAN RP3 is described in the listing as a fixed-bench milling machine. Fixed-bench (bench) milling machines are typically used for small- to medium-sized machining tasks where the machine is mounted to a bench or stand rather than being a full floor-standing column mill. This listing does not include specific performance data, accessories, tooling, or electrical information.
Included/Noted Items
- Category: Milling Machine
- Type: Fixed Bench
- Brand: SACHMAN
- Model: RP3
No accessories, tooling, guarding, or attachments are specified in the provided description. No numeric technical specifications are listed.
Buyer Advisory
The seller’s original note advises inspection and confirmation of all data. Potential buyers should verify machine condition and essential items before purchase, including but not limited to:
- Spindle condition and runout
- Table condition, T-slots and travel
- Lead screws, ways and gib adjustment
- Gearbox/feeds and speed range (if applicable)
- Electrical controls, wiring and motor details
- Safety guards and emergency stops
- Presence and condition of any accessories or tooling
Disclaimer
The data in the listing may be incomplete or inaccurate and cannot be guaranteed. Inspect the machine and confirm all technical details with the seller prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Category
Milling Machine
Type
Fixed Bench
Brand
SACHMAN
Model
RP3
Technical Specifications
Convert to MetricImperial
The data provided are based on the information available to us, where possible obtained from manufacturers; therefore, despite good faith, due to the nature and complexity of the goods, such data may be incomplete and/or inaccurate and in no case can their accuracy be guaranteed or constitute any contractual obligation. You are always advised to inspect the goods and confirm the data.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 181 |
| Last activity | Oct. 29, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
Category
Milling Machine
Type
Fixed Bench
Brand
SACHMAN
Model
RP3
Technical Specifications
Convert to MetricImperial
The data provided are based on the information available to us, where possible obtained from manufacturers; therefore, despite good faith, due to the nature and complexity of the goods, such data may be incomplete and/or inaccurate and in no case can their accuracy be guaranteed or constitute any contractual obligation. You are always advised to inspect the goods and confirm the data.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Summary
This listing is for a milling machine, Type: Fixed Bench, Brand: SACHMAN, Model: RP3. The unit is presented as a bench-style milling machine intended for general milling tasks; no numeric specifications (year, power, capacities, dimensions, hours) are provided in the listing.
Description
The SACHMAN RP3 is described in the listing as a fixed-bench milling machine. Fixed-bench (bench) milling machines are typically used for small- to medium-sized machining tasks where the machine is mounted to a bench or stand rather than being a full floor-standing column mill. This listing does not include specific performance data, accessories, tooling, or electrical information.
Included/Noted Items
- Category: Milling Machine
- Type: Fixed Bench
- Brand: SACHMAN
- Model: RP3
No accessories, tooling, guarding, or attachments are specified in the provided description. No numeric technical specifications are listed.
Buyer Advisory
The seller’s original note advises inspection and confirmation of all data. Potential buyers should verify machine condition and essential items before purchase, including but not limited to:
- Spindle condition and runout
- Table condition, T-slots and travel
- Lead screws, ways and gib adjustment
- Gearbox/feeds and speed range (if applicable)
- Electrical controls, wiring and motor details
- Safety guards and emergency stops
- Presence and condition of any accessories or tooling
Disclaimer
The data in the listing may be incomplete or inaccurate and cannot be guaranteed. Inspect the machine and confirm all technical details with the seller prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 181 |
| Last activity | Oct. 29, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
CNC фрезова машина с неподвижна станина SACHMAN RP3
CNC ložová frézka SACHMAN RP3
SACHMAN RP3 CNC planfræsemaskine med fast bord
SACHMAN RP3 CNC Bettfräsmaschine
Φρέζα CNC σταθερής κλίνης SACHMAN RP3
SACHMAN RP3 CNC bed type milling machine
Fresadora CNC de bancada fija SACHMAN RP3
Fraiseuse CNC à banc fixe SACHMAN RP3
CNC glodalica s nepomičnim ležištem SACHMAN RP3
SACHMAN RP3 CNC ágyas marógép
Fresatrice CNC a banco fisso SACHMAN RP3
SACHMAN RP3 CNC frezavimo staklė su fiksuota lova
SACHMAN RP3 CNC bedfreesmachine
Frezarka CNC łożowa SACHMAN RP3
Fresadora CNC de bancada fixa SACHMAN RP3
Mașină de frezat CNC cu banc fix SACHMAN RP3
SACHMAN RP3 Фрезерный станок с неподвижной станиной с ЧПУ
CNC glodalica sa nepokretnim ležištem SACHMAN RP3
SACHMAN RP3 CNC bäddfräsmaskin
CNC sabit tablalı freze tezgâhı SACHMAN RP3
EN
- Languages
English (GB)