Extrusion line for blowing polymer films of type ABA, MODEL 2L800
Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD
2017 onwards
Specifications
1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%)
2. Maximum film width: 800 mm
3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40%
4. Maximum performance: 100 kg / h;
5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm;
6. Weight: 4.5 t;
7. Main power: 70 kW;
8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455
Data sheet
1. Extruder (2 sets)
1.1 auger diameter: 55 mm
1.2 Ratio of length to diameter: 30: 1
1.3 Maximum screw rotation speed: 100 rpm.
1.4 Type of screw: mixed type, with a barrier
1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions + Specification of the conditions of patenting (AIA + PTA)), doped, nitrated;
1.6 Zones of control screw temperature: 4 zones
1.7. Heating method: double stainless steel heater.
1.8 Cylinder heating power: 6.4 kW * 2 = 12.8 kW
1.9 The main motor of the extruder: 2 sets, three-phase asynchronous motor with a capacity of 22 kW x 2 = 44 kW
WNM marks;
1.10 Reducer: Taiwan Sunlun, SL-30, Taiwan * 2 sets
a. Transmission Type: Standard Helical Helical Helical Drive
b. Transmission Material: 20CrMnTi
c. Transmission surface: high strength and high grinding precision
d. Drive lubrication method: forced lubrication through oil circulation
e. Drive cooling method: forced oil cooling with water circuit
1.11 Filter quick change device 2 sets
1.12 Automatic material loader 2 sets
1.13 Melt pressure sensor: 2 pieces
2. Extrusion head (1 set)
2.1 Type of head: ABA type rotating head;
2.2 Material mandrel / matrix: alloy steel, forged and heat treated;
2.3 Matrix diameter: ◎ 200 mm (LDPE); ◎ 100 mm (PND);
2.4 The die gap: ◎ 200mm 1.75mm ; ◎ 100mm 1.5 mm;
2.5 Surface of the head and chrome channels
2.6 Method of heating: dual layer heating element
3. A ring of an obduv (2 sets) (PVD + PND)
3.1 Type: Double Edge Blow Ring
3.2 Material: cast aluminum
3.3 Air blower power: 3.7 kW
4. Basket stabilization film bubble (1set.)
4.1 Type: circular structure
5. Folding frame and corner folding device
5.1Material: steel supporting frame + special aluminum profile
6. Broaching device (1 set)
6.1 Power of the primary pulling engine: 1.5 kW
6.2 Feed Speed: 120 m / min.
6.3 Distance from floor surface: 6.0 m
6.4 Type of winder clamping device: pneumatic
6.5 Material winder: ethylene propylene rubber
7. Wrap (1 set)
7.1 Type of winder: automatic double surface winder winder. Winder material: ethylene propylene rubber
7.2 Maximum winding width: 800 mm
7.3 Maximum winding diameter: 800 mm
7.4 Maximum winding speed: 120 m / min.
7.5 Equipped with meter counter
7.6 Device for removing static electricity from the winder: 2 pieces
8. System of electric regulation (1 set)
8.1 Temperature controller: Yudian, China
8.2 Magnetic starter: Chint, China
8.3 Converter: Invoance, Shenzhen

9. Frame tower (1 set)
9.1 Structure: non-separable, with a secure operator platform and a protective barrier
10. Corona treatment device 1 set
11. Machine for processing technological returnable film waste: 2 sets

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Screw diameter 55 mm
Output 100 kg/h
-------------------
Length x width x height 6000.0 × 3700.0 × 6500.0
Weight 4500 kg
Worked hours
Hours under power
State excellent
At local norms yes
Status
Client type User – small or medium company
Active since 2019
Offers online 4
Last activity March 27, 2024

Description

Extrusion line for blowing polymer films of type ABA, MODEL 2L800
Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD
2017 onwards
Specifications
1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%)
2. Maximum film width: 800 mm
3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40%
4. Maximum performance: 100 kg / h;
5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm;
6. Weight: 4.5 t;
7. Main power: 70 kW;
8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455
Data sheet
1. Extruder (2 sets)
1.1 auger diameter: 55 mm
1.2 Ratio of length to diameter: 30: 1
1.3 Maximum screw rotation speed: 100 rpm.
1.4 Type of screw: mixed type, with a barrier
1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions + Specification of the conditions of patenting (AIA + PTA)), doped, nitrated;
1.6 Zones of control screw temperature: 4 zones
1.7. Heating method: double stainless steel heater.
1.8 Cylinder heating power: 6.4 kW * 2 = 12.8 kW
1.9 The main motor of the extruder: 2 sets, three-phase asynchronous motor with a capacity of 22 kW x 2 = 44 kW
WNM marks;
1.10 Reducer: Taiwan Sunlun, SL-30, Taiwan * 2 sets
a. Transmission Type: Standard Helical Helical Helical Drive
b. Transmission Material: 20CrMnTi
c. Transmission surface: high strength and high grinding precision
d. Drive lubrication method: forced lubrication through oil circulation
e. Drive cooling method: forced oil cooling with water circuit
1.11 Filter quick change device 2 sets
1.12 Automatic material loader 2 sets
1.13 Melt pressure sensor: 2 pieces
2. Extrusion head (1 set)
2.1 Type of head: ABA type rotating head;
2.2 Material mandrel / matrix: alloy steel, forged and heat treated;
2.3 Matrix diameter: ◎ 200 mm (LDPE); ◎ 100 mm (PND);
2.4 The die gap: ◎ 200mm 1.75mm ; ◎ 100mm 1.5 mm;
2.5 Surface of the head and chrome channels
2.6 Method of heating: dual layer heating element
3. A ring of an obduv (2 sets) (PVD + PND)
3.1 Type: Double Edge Blow Ring
3.2 Material: cast aluminum
3.3 Air blower power: 3.7 kW
4. Basket stabilization film bubble (1set.)
4.1 Type: circular structure
5. Folding frame and corner folding device
5.1Material: steel supporting frame + special aluminum profile
6. Broaching device (1 set)
6.1 Power of the primary pulling engine: 1.5 kW
6.2 Feed Speed: 120 m / min.
6.3 Distance from floor surface: 6.0 m
6.4 Type of winder clamping device: pneumatic
6.5 Material winder: ethylene propylene rubber
7. Wrap (1 set)
7.1 Type of winder: automatic double surface winder winder. Winder material: ethylene propylene rubber
7.2 Maximum winding width: 800 mm
7.3 Maximum winding diameter: 800 mm
7.4 Maximum winding speed: 120 m / min.
7.5 Equipped with meter counter
7.6 Device for removing static electricity from the winder: 2 pieces
8. System of electric regulation (1 set)
8.1 Temperature controller: Yudian, China
8.2 Magnetic starter: Chint, China
8.3 Converter: Invoance, Shenzhen

9. Frame tower (1 set)
9.1 Structure: non-separable, with a secure operator platform and a protective barrier
10. Corona treatment device 1 set
11. Machine for processing technological returnable film waste: 2 sets

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Screw diameter 55 mm
Output 100 kg/h
-------------------
Length x width x height 6000.0 × 3700.0 × 6500.0
Weight 4500 kg
Worked hours
Hours under power
State excellent
At local norms yes
Status

About this seller

Client type User – small or medium company
Active since 2019
Offers online 4
Last activity March 27, 2024

Here is a selection of similar machines

Ruian Aoxiang Packaging Machinery 2L800 Extrusion line