Contact us to receive an offer.
| Category | Filling machines - Tube filling machines |
| Capacity units/hour | 9600 u/h |
| Nbr of filling stations | 1 |
| Tube type | Metal |
| Max filling range (specify) | |
| Current tooling (ex. 1ml, 5 ml, 8 gr...) | |
| Electrical power | 380 V |
| Engine Power | 3 kW |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Last availability date | 25/10/2026 |
| Product id | P260801206 |
| Language |
Overview
Romaco Unipac Silver 160 automatic tube filling machine designed for metal (including aluminum) tubes. Intended operations include hopper loading of empty tubes, orientation using a photocell, product dosing/dispensing, end sealing by bending and creasing, and embossing of the batch/lot number. The listing notes the machine will be delivered with a new control panel.
Key technical data (as provided)
- Manufacturer: Romaco Unipac
- Model: Silver 160
- Year of construction: 1997
- Capacity: 9,600 units/hour
- Number of filling stations: 1
- Supply voltage: 380 V
- Engine power: 3.0 kW
Visible components and assembly details
- Stainless steel frame and structural components.
- Rotary indexing turret with multiple metal clamps and stacked metal plates; a vertical drive shaft and circular indexing section are present.
- Clamp/actuator assemblies with vertical rods, mounting brackets, spring-loaded linkages and adjustable fasteners.
- Clamping system includes spring-loaded levers and hardened metal blocks.
- Conveyor-like curved table/tray with orange circular discs (product handling fixtures), metal rails and adjustable stops for product positioning.
- Control panel equipped with gauges, a red/green stack light, and instruction/warning labels on the panel door.
- Nameplate indicates UNIPAC 160 and the year of construction (1997).
Condition and recommendations
The machine shows robust stainless steel construction and detailed mechanical linkages. Operational condition and commissioning status are not confirmed here. Prospective buyers should request run/test reports, electrical schematics, spare-parts lists, and any maintenance history prior to purchase. Additional measurements, tooling details (e.g., max container diameter/height) and confirmation of electrical compatibility should be obtained if required for integration.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Romaco Unipac Model 160 automatic tube filling machine for aluminum tubes. The operation includes loading empty tubes into the hopper, orienting the tubes using a photocell, dispensing the product, and sealing the tube ends by bending and creasing them, along with embossing the batch number. The machine will be delivered with a new control panel.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 85 |
| Last activity | Oct. 26, 2026 |
Romaco Unipac Model 160 automatic tube filling machine for aluminum tubes. The operation includes loading empty tubes into the hopper, orienting the tubes using a photocell, dispensing the product, and sealing the tube ends by bending and creasing them, along with embossing the batch number. The machine will be delivered with a new control panel.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Filling machines - Tube filling machines |
| Capacity units/hour | 9600 u/h |
| Nbr of filling stations | 1 |
| Tube type | Metal |
| Max filling range (specify) | |
| Current tooling (ex. 1ml, 5 ml, 8 gr...) | |
| Electrical power | 380 V |
| Engine Power | 3 kW |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status | visible |
| Last availability date | 25/10/2026 |
| Product id | P260801206 |
| Language |
Overview
Romaco Unipac Silver 160 automatic tube filling machine designed for metal (including aluminum) tubes. Intended operations include hopper loading of empty tubes, orientation using a photocell, product dosing/dispensing, end sealing by bending and creasing, and embossing of the batch/lot number. The listing notes the machine will be delivered with a new control panel.
Key technical data (as provided)
- Manufacturer: Romaco Unipac
- Model: Silver 160
- Year of construction: 1997
- Capacity: 9,600 units/hour
- Number of filling stations: 1
- Supply voltage: 380 V
- Engine power: 3.0 kW
Visible components and assembly details
- Stainless steel frame and structural components.
- Rotary indexing turret with multiple metal clamps and stacked metal plates; a vertical drive shaft and circular indexing section are present.
- Clamp/actuator assemblies with vertical rods, mounting brackets, spring-loaded linkages and adjustable fasteners.
- Clamping system includes spring-loaded levers and hardened metal blocks.
- Conveyor-like curved table/tray with orange circular discs (product handling fixtures), metal rails and adjustable stops for product positioning.
- Control panel equipped with gauges, a red/green stack light, and instruction/warning labels on the panel door.
- Nameplate indicates UNIPAC 160 and the year of construction (1997).
Condition and recommendations
The machine shows robust stainless steel construction and detailed mechanical linkages. Operational condition and commissioning status are not confirmed here. Prospective buyers should request run/test reports, electrical schematics, spare-parts lists, and any maintenance history prior to purchase. Additional measurements, tooling details (e.g., max container diameter/height) and confirmation of electrical compatibility should be obtained if required for integration.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 85 |
| Last activity | Oct. 26, 2026 |