Contact us to receive an offer.
| Manufacturer | Рязанский станкостроительный завод |
|---|---|
| Model | 166 |
| Year | |
| Location | Poland
|
## Main technical specifications — 166
The listed specifications describe a heavy-duty lathe with a maximum swing over the bed of 1250 mm and a maximum swing over the carriage of 900 mm. The stated centre height is 650 mm, and the distance between centres is 6300 mm. The maximum workpiece weight is given as 15–30 t, depending on configuration.
| Parameter | Value |
|---|---:|
| Maximum swing over bed | 1250 mm |
| Maximum swing over carriage | 900 mm |
| Centre height | 650 mm |
| Distance between centres | 6300 mm |
| Maximum workpiece weight | 15–30 t, depending on configuration |
| Spindle speed range | 1.6–200 rpm |
| Main motor | 30–60 kW |
| Toolholder shank size | 70 × 60 mm |
| Rapid traverse speed of the carriage | 3 m/min |
| Tailstock quill travel | 400 mm |
| Machine weight | 25 t |
| Overall dimensions | Up to 13 200 × 2500 × 2060 mm |
The spindle speed range is listed as 1.6–200 rpm, and the main motor rating is specified as 30–60 kW. The toolholder shank size is 70 × 60 mm. Carriage rapid traverse is stated as 3 m/min, while tailstock quill travel is 400 mm. The machine weight is listed as 25 t. Overall dimensions are stated as up to 13 200 × 2500 × 2060 mm. The maximum workpiece weight range is configuration-dependent, as indicated in the specifications. No further details about the machine’s condition, included accessories, or configuration are provided here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Main technical specifications 166
Parameter Value
Maximum swing over bed 1250 mm
Maximum swing over carriage 900 mm
Centre height 650 mm
Distance between centres 6300 mm
Maximum workpiece weight 15–30 t (depending on configuration)
Spindle speed range 1.6–200 rpm
Main motor 30–60 kW
Toolholder shank size 70 × 60 mm
Rapid traverse speed of the carriage 3 m/min
Tailstock quill travel 400 mm
Machine weight 25 t
Overall dimensions up to 13 200 × 2500 × 2060 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | Oct. 26, 2026 |
Main technical specifications 166
Parameter Value
Maximum swing over bed 1250 mm
Maximum swing over carriage 900 mm
Centre height 650 mm
Distance between centres 6300 mm
Maximum workpiece weight 15–30 t (depending on configuration)
Spindle speed range 1.6–200 rpm
Main motor 30–60 kW
Toolholder shank size 70 × 60 mm
Rapid traverse speed of the carriage 3 m/min
Tailstock quill travel 400 mm
Machine weight 25 t
Overall dimensions up to 13 200 × 2500 × 2060 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
## Main technical specifications — 166
The listed specifications describe a heavy-duty lathe with a maximum swing over the bed of 1250 mm and a maximum swing over the carriage of 900 mm. The stated centre height is 650 mm, and the distance between centres is 6300 mm. The maximum workpiece weight is given as 15–30 t, depending on configuration.
| Parameter | Value |
|---|---:|
| Maximum swing over bed | 1250 mm |
| Maximum swing over carriage | 900 mm |
| Centre height | 650 mm |
| Distance between centres | 6300 mm |
| Maximum workpiece weight | 15–30 t, depending on configuration |
| Spindle speed range | 1.6–200 rpm |
| Main motor | 30–60 kW |
| Toolholder shank size | 70 × 60 mm |
| Rapid traverse speed of the carriage | 3 m/min |
| Tailstock quill travel | 400 mm |
| Machine weight | 25 t |
| Overall dimensions | Up to 13 200 × 2500 × 2060 mm |
The spindle speed range is listed as 1.6–200 rpm, and the main motor rating is specified as 30–60 kW. The toolholder shank size is 70 × 60 mm. Carriage rapid traverse is stated as 3 m/min, while tailstock quill travel is 400 mm. The machine weight is listed as 25 t. Overall dimensions are stated as up to 13 200 × 2500 × 2060 mm. The maximum workpiece weight range is configuration-dependent, as indicated in the specifications. No further details about the machine’s condition, included accessories, or configuration are provided here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | Oct. 26, 2026 |
Poland
1984
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above the bed | 1600 mm |
| Diameter in the gap | 105 mm |
| Max workpiece weight | 30000 kg |
| Overhauled | yes |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Max. turning diameter | 1600 mm |
|---|---|
| Center height | 800 mm |
| Ø above transversing slide | 1280 mm |
| Faceplate diameter | 1600 mm |
| Spindle motor power | 75 kW |
| Year of overhauling | 2026 |
| Steady | no |
Poland
1983
| Length between centers | 10000 mm |
|---|---|
| Turning length | 10000 mm |
| Ø above transversing slide | 500 mm |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | yes |
| Max. turning diameter | 1050 mm |
|---|---|
| Ø above the bed | 800 mm |
| Diameter in the gap | 95 mm |
| Spindle motor power | 22 kW |
| Tailstock | yes |
| Type of chuck | 3 jaw |
Poland
1982
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above transversing slide | 630 mm |
| Max workpiece weight | 12000 kg |
| Turning speed | -1 rpm |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Max. turning diameter | 1250 mm |
|---|---|
| Ø above the bed | 1000 mm |
| Diameter in the gap | 1250 mm |
| Spindle bore | 120 mm |
| Overhauled | no |
| Steady | yes |
Poland
1984
| Length between centers | 5000 mm |
|---|---|
| Ø above the bed | 930 mm |
| Max workpiece weight | 9000 kg |
| Turning speed | 800 rpm |
| Tailstock | no |
| Type of chuck | 4 jaw |
| Turning length | 5000 mm |
|---|---|
| Diameter in the gap | 1200 mm |
| Spindle bore | 95 mm |
| Overhauled | no |
| Steady | no |
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Spindle bore | 95 mm |
| Tailstock | no |
| Ø above the bed | 930 mm |
|---|---|
| Diameter in the gap | 1200 mm |
| Overhauled | no |
| Steady | no |
Belgium
| Length between centers | 4000 mm |
|---|---|
| Ø above transversing slide | 370 mm |
| Turning speed | 1400 rpm |
| Overhauled | no |
| Steady | yes |
| Ø above the bed | 660 mm |
|---|---|
| Spindle bore | 80 mm |
| Spindle motor power | 27 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Poland
1983
| Length between centers | 6000 mm |
|---|---|
| Turning length | 6000 mm |
| Ø above the bed | 800 mm |
| Diameter in the gap | 95 mm |
| Spindle motor power | 25 kW |
| Tailstock | yes |
| Max. turning diameter | 800 mm |
|---|---|
| Center height | 400 mm |
| Ø above transversing slide | 530 mm |
| Max workpiece weight | 9000 kg |
| Overhauled | no |
| Steady | yes |
Poland
| Length between centers | mm |
|---|---|
| Turning length | 1250 mm |
| Ø above the bed | mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | 655 mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | 390 mm |
| Faceplate diameter | mm |
| Spindle bore | 82 mm |
| Spindle motor power | 22 kW |
| Year of overhauling | |
| Steady | no |
| Max. turning diameter | 4500 mm |
|---|---|
| Center height | 2250 mm |
| Max workpiece weight | 15000 kg |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Turning length | 6000 mm |
|---|---|
| Diameter in the gap | 2500 mm |
| Overhauled | no |
| Steady | no |
Poland
1991
| Turning length | 5000 mm |
|---|---|
| Overhauled | yes |
| Steady | no |
| Max workpiece weight | 40000 kg |
|---|---|
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Length between centers | 3000 mm |
|---|---|
| Turning length | 3000 mm |
| Ø above the bed | 930 mm |
| Diameter in the gap | 1200 mm |
| Max workpiece weight | kg |
| Turning speed | 250 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | mm |
| Faceplate diameter | mm |
| Spindle bore | 320 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Poland
1988
| Length between centers | 10000 mm |
|---|---|
| Turning length | 8000 mm |
| Ø above the bed | 4000 mm |
| Faceplate diameter | 2000 mm |
| Spindle bore | 105 mm |
| Spindle motor power | 75 kW |
| Year of overhauling | 1988 |
| Steady | yes |
| Max. turning diameter | 4000 mm |
|---|---|
| Center height | 2050 mm |
| Ø above transversing slide | 4000 mm |
| Max workpiece weight | 30000 kg |
| Turning speed | 98 rpm |
| Overhauled | no |
| Tailstock | yes |
| Type of chuck | 4 jaw |
| Length between centers | 3150 mm |
|---|---|
| Ø above the bed | 800 mm |
| Spindle bore | 90 mm |
| Spindle motor power | 18.5 kW |
| Tailstock | no |
| Type of chuck | 4 jaw |
| Center height | 400 mm |
|---|---|
| Ø above transversing slide | 540 mm |
| Turning speed | 450 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 4000 mm |
|---|---|
| Ø above the bed | 800 mm |
| Spindle bore | 92 mm |
| Overhauled | no |
| Steady | no |
| Turning length | 4000 mm |
|---|---|
| Diameter in the gap | 870 mm |
| Spindle motor power | 15 kW |
| Tailstock | no |
| Type of chuck | other |
Poland
| Length between centers | 5000 mm |
|---|---|
| Turning length | 5000 mm |
| Ø above the bed | 1000 mm |
| Diameter in the gap | 85 mm |
| Tailstock | no |
| Max. turning diameter | 1000 mm |
|---|---|
| Center height | 500 mm |
| Ø above transversing slide | 600 mm |
| Overhauled | no |
| Steady | no |
Austria
2009
| Length between centers | 11000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 1250 mm |
| Diameter in the gap | mm |
| Max workpiece weight | 12000 kg |
| Turning speed | 315 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | 720 mm |
| Ø above transversing slide | 1000 mm |
| Faceplate diameter | 1000 mm |
| Spindle bore | mm |
| Spindle motor power | 55 kW |
| Year of overhauling | |
| Steady | no |
Poland
1988
| Overhauled | no |
|---|---|
| Steady | no |
| Tailstock | no |
|---|
Austria
2009
| Length between centers | 11000 mm |
|---|---|
| Turning length | mm |
| Ø above the bed | 1250 mm |
| Diameter in the gap | mm |
| Max workpiece weight | 12000 kg |
| Turning speed | 315 rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | mm |
|---|---|
| Center height | 720 mm |
| Ø above transversing slide | 1000 mm |
| Faceplate diameter | 1000 mm |
| Spindle bore | mm |
| Spindle motor power | 55 kW |
| Year of overhauling | |
| Steady | no |
Poland
1982
| Length between centers | 3000 mm |
|---|---|
| Ø above transversing slide | 630 mm |
| Spindle bore | 120 mm |
| Spindle motor power | 27 kW |
| Tailstock | no |
| Ø above the bed | 1000 mm |
|---|---|
| Max workpiece weight | 12000 kg |
| Turning speed | 500 rpm |
| Overhauled | no |
| Steady | no |
| Length between centers | 10000 mm |
|---|---|
| Ø above the bed | 1600 mm |
| Faceplate diameter | 1500 mm |
| Spindle motor power | 55 kW |
| Year of overhauling | 2002 |
| Steady | no |
| Center height | 800 mm |
|---|---|
| Ø above transversing slide | 1250 mm |
| Max workpiece weight | 40000 kg |
| Overhauled | no |
| Tailstock | no |
Poland
1995
| Turning length | 4000 mm |
|---|---|
| Ø above transversing slide | 1660 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 2000 mm |
|---|---|
| Spindle motor power | 80 kW |
| Tailstock | no |
| Length between centers | 4000 mm |
|---|---|
| Center height | 500 mm |
| Ø above transversing slide | 690 mm |
| Spindle bore | 150 mm |
| Spindle motor power | 22 kW |
| Tailstock | no |
| Max. turning diameter | 1300 mm |
|---|---|
| Ø above the bed | 1040 mm |
| Diameter in the gap | 1300 mm |
| Turning speed | 800 rpm |
| Overhauled | no |
| Steady | yes |
| Length between centers | 3000 mm |
|---|---|
| Turning length | 3000 mm |
| Ø above the bed | 545 mm |
| Diameter in the gap | mm |
| Max workpiece weight | kg |
| Turning speed | rpm |
| Overhauled | no |
| Tailstock | no |
| Max. turning diameter | 545 mm |
|---|---|
| Center height | mm |
| Ø above transversing slide | mm |
| Faceplate diameter | mm |
| Spindle bore | 52 mm |
| Spindle motor power | kW |
| Year of overhauling | |
| Steady | no |
Netherlands
| Length between centers | 6000 mm |
|---|---|
| Ø above transversing slide | 650 mm |
| Turning speed | 900 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1010 mm |
|---|---|
| Spindle bore | 104 mm |
| Spindle motor power | 52 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Netherlands
| Length between centers | 3300 mm |
|---|---|
| Ø above transversing slide | 640 mm |
| Faceplate diameter | 315 mm |
| Turning speed | 1400 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 840 mm |
|---|---|
| Diameter in the gap | 640 mm |
| Spindle bore | 74 mm |
| Spindle motor power | 22 kW |
| Tailstock | no |
| Type of chuck | 3 jaw |
Netherlands
| Length between centers | 5000 mm |
|---|---|
| Ø above transversing slide | 900 mm |
| Turning speed | 1000 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1200 mm |
|---|---|
| Spindle bore | 120 mm |
| Spindle motor power | 40 kW |
| Tailstock | no |
| Turning length | 5000 mm |
|---|---|
| Ø above transversing slide | 600 mm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 1000 mm |
|---|---|
| Spindle bore | 85 mm |
| Tailstock | no |
| Length between centers | 6000 mm |
|---|---|
| Ø above the bed | 1000 mm |
| Spindle bore | 150 mm |
| Tailstock | no |
| Center height | 500 mm |
|---|---|
| Ø above transversing slide | 310 mm |
| Overhauled | no |
| Steady | yes |
Netherlands
| Length between centers | 10000 mm |
|---|---|
| Ø above transversing slide | 1500 mm |
| Turning speed | 71 rpm |
| Overhauled | no |
| Steady | no |
| Ø above the bed | 2000 mm |
|---|---|
| Faceplate diameter | 1800 mm |
| Spindle motor power | 117 kW |
| Tailstock | no |
| Length between centers | 6000 mm |
|---|---|
| Turning length | 6000 mm |
| Ø above transversing slide | 540 mm |
| Overhauled | no |
| Steady | no |
| Max. turning diameter | 800 mm |
|---|---|
| Ø above the bed | 800 mm |
| Spindle bore | 95 mm |
| Tailstock | no |
Тежък струг Рязанский станкостроительный завод 166
Těžký soustruh Рязанский станкостроительный завод 166
Рязанский станкостроительный завод 166 Svær drejebænk
Рязанский станкостроительный завод 166 Schwere Drehmaschine
Τόρνος βαρέως τύπου Рязанский станкостроительный завод 166
Рязанский станкостроительный завод 166 Heavy-duty lathe
Torno pesado Рязанский станкостроительный завод 166
Tour lourd Рязанский станкостроительный завод 166
Teški tokarski stroj Рязанский станкостроительный завод 166
Рязанский станкостроительный завод 166 Nehéz esztergagép
Tornio pesante Рязанский станкостроительный завод 166
Рязанский станкостроительный завод 166 Sunki tekinimo staklė
Рязанский станкостроительный завод 166 Zware draaibank
Tokarka ciężka Рязанский станкостроительный завод 166
Torno pesado Рязанский станкостроительный завод 166
Strung greu Рязанский станкостроительный завод 166
Model 166 lathe from the Razan factory
Teški strug Рязанский станкостроительный завод 166
Рязанский станкостроительный завод 166 Tung svarv
Ağır hizmet tipi torna Рязанский станкостроительный завод 166
Turkey
Italy
France
EN
- Languages
English (GB)