| Category | Bagging machines - Horizontal - Flowpacks |
| Output | 150 /min |
| Automation level | Semi-automatic |
| Length x width x height | 100300.0 × 20300.0 × 10120.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Record Panda |
| Last availability date | 22/10/2026 |
| Product id | P261020079 |
| Language |
Record Panda E horizontal flow-wrapper, manufactured in 2006, for packaging products in flow-wrap film. The machine is specified for products measuring 100–300 mm long, 20–300 mm wide and 10–120 mm high, with a stated output of up to 150 units per minute depending on the product. Maximum film width is 720 mm. The machine runs from left to right and is supplied with a stacking-conveyor infeed. It is available from stock.
The machine has conveyor sections at the infeed and outfeed, an enclosed central body and a film-feed assembly with a spindle and guide rollers. The film-feed side is shown without a film roll. A touchscreen control panel, push buttons and an emergency-stop button are fitted; a red-green stack light is also present. Safety notices and warning labels are attached to the machine. Internal drive components include a motor, gearboxes, belts, pulleys, chain and sprockets, with pneumatic tubing and electrical cabling visible in the opened compartment. A pressure regulator with gauge is present in the film-feed mechanism.
Visible exterior surfaces, conveyor sections and exposed components appear generally clean and assembled, with no obvious major external damage visible. This description does not confirm operational condition. The machine is suitable for consideration by buyers seeking a horizontal flow-wrapper with product infeed and film-handling equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
packaging machinery
- Record Panda E
- Pack perameters are 100-300 long x 20-300mm wide x 10-120mm high
- Capable of packing at a rate of upto 150 units per minute, depending on product
- 720mm maximum film width
- Machine is running from left to right
- Machine is available from stock
- Machine with stacking conveyor infeed
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 100 |
| Last activity | Oct. 26, 2026 |
2C Machines Ltd is a UK-based specialist in food processing and packaging machinery, helping businesses source equipment and make the most of machinery they no longer need. With more than 30 years of experience in the food processing sector, the company combines practical industry knowledge with a broad perspective on the equipment needs of food producers. Its range spans new and used machinery for applications including meat processing, bakery production, packaging, freezing and cooling, and materials handling. Whether a business is looking for an individual machine or planning a larger production project, 2C Machines aims to help clients find equipment suited to their requirements, budget and timescale. The company also undertakes turnkey food production projects. For businesses with surplus equipment, 2C Machines offers professional valuations and flexible routes to sale. It can purchase machinery outright, arrange tender sales or manage auctions, supporting clients with the sale of individual items or the clearance of an entire factory. These options are designed to help companies release value from redundant assets while choosing an approach that fits their circumstances. By bringing buyers and sellers of food industry machinery together, 2C Machines Ltd provides a practical resource for businesses looking to equip, update or reorganise their production operations. Its experience, varied machinery offering and range of purchasing and resale services make it a knowledgeable partner at every stage—from finding the right equipment to managing machinery no longer in use.
packaging machinery
- Record Panda E
- Pack perameters are 100-300 long x 20-300mm wide x 10-120mm high
- Capable of packing at a rate of upto 150 units per minute, depending on product
- 720mm maximum film width
- Machine is running from left to right
- Machine is available from stock
- Machine with stacking conveyor infeed
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Bagging machines - Horizontal - Flowpacks |
| Output | 150 /min |
| Automation level | Semi-automatic |
| Length x width x height | 100300.0 × 20300.0 × 10120.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Record Panda |
| Last availability date | 22/10/2026 |
| Product id | P261020079 |
| Language |
Record Panda E horizontal flow-wrapper, manufactured in 2006, for packaging products in flow-wrap film. The machine is specified for products measuring 100–300 mm long, 20–300 mm wide and 10–120 mm high, with a stated output of up to 150 units per minute depending on the product. Maximum film width is 720 mm. The machine runs from left to right and is supplied with a stacking-conveyor infeed. It is available from stock.
The machine has conveyor sections at the infeed and outfeed, an enclosed central body and a film-feed assembly with a spindle and guide rollers. The film-feed side is shown without a film roll. A touchscreen control panel, push buttons and an emergency-stop button are fitted; a red-green stack light is also present. Safety notices and warning labels are attached to the machine. Internal drive components include a motor, gearboxes, belts, pulleys, chain and sprockets, with pneumatic tubing and electrical cabling visible in the opened compartment. A pressure regulator with gauge is present in the film-feed mechanism.
Visible exterior surfaces, conveyor sections and exposed components appear generally clean and assembled, with no obvious major external damage visible. This description does not confirm operational condition. The machine is suitable for consideration by buyers seeking a horizontal flow-wrapper with product infeed and film-handling equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 100 |
| Last activity | Oct. 26, 2026 |
2C Machines Ltd is a UK-based specialist in food processing and packaging machinery, helping businesses source equipment and make the most of machinery they no longer need. With more than 30 years of experience in the food processing sector, the company combines practical industry knowledge with a broad perspective on the equipment needs of food producers. Its range spans new and used machinery for applications including meat processing, bakery production, packaging, freezing and cooling, and materials handling. Whether a business is looking for an individual machine or planning a larger production project, 2C Machines aims to help clients find equipment suited to their requirements, budget and timescale. The company also undertakes turnkey food production projects. For businesses with surplus equipment, 2C Machines offers professional valuations and flexible routes to sale. It can purchase machinery outright, arrange tender sales or manage auctions, supporting clients with the sale of individual items or the clearance of an entire factory. These options are designed to help companies release value from redundant assets while choosing an approach that fits their circumstances. By bringing buyers and sellers of food industry machinery together, 2C Machines Ltd provides a practical resource for businesses looking to equip, update or reorganise their production operations. Its experience, varied machinery offering and range of purchasing and resale services make it a knowledgeable partner at every stage—from finding the right equipment to managing machinery no longer in use.