42,500 €
Make an offerContact us to receive an offer.
| Power in tons | 630 T |
| Table length | 1690 mm |
| Table width | 1200 mm |
| Nbr of strokes/min | 42 |
| Engine Power | 37 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | Ravne 630T |
| Last availability date | 31/03/2026 |
This listing features a Ravne 630T trimming press, a robust industrial machine designed for heavy-duty forging operations. Manufactured in 1980, this press offers a substantial pressing capacity of 630 tons, making it suitable for demanding trimming and sizing tasks. The machine's table measures 1690 mm in length and 1200 mm in width, providing a sizable work surface for various applications.
The press operates at a rate of 42 strokes per minute, with a stroke length of 250 mm, enabling efficient and consistent production cycles. It is powered by a 37 kW engine, which drives the machine's operations. The overall dimensions of the press are 2500 mm in length, 1300 mm in width, and 4950 mm in height, with a total weight of approximately 36 tons.
The press is painted green with yellow components, including the ram and flywheel, which are visible features of the machine. It has a bolted frame construction and a large flywheel that contribute to its sturdy build. The machine is positioned indoors near windows, allowing for natural light in the workspace.
Several metal fixtures and tooling are attached to the press table, indicating its readiness for forming operations. Safety features include two red emergency stop buttons located on each side of the press frame. An electric motor is mounted on the top left side of the press, supporting its mechanical functions.
The surface of the machine shows signs of industrial use with some wear and dirt, which is typical for equipment of this nature. However, in certain areas, the paint appears relatively fresh with minimal visible wear. No control panel or additional accessories are visible in the current setup. A wooden ladder is seen leaning against the left side of the press, likely for maintenance access.
This Ravne 630T trimming press is a substantial piece of equipment suitable for industrial forging environments requiring high pressing capacity and reliable performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type Trimming press
Manufacturer Ravne
Model 630T
Year of manufacture 1980
Pressing capacity 630 ton
Height above floor 4950 mm
Stroke per minute 42
Stroke 250 mm
Table size (lxb) 1690 x 1200 mm
Total power consumption 37 kW
Overall size (lxbxh) 2500 x 1300 x 4950 mm
Total weight in kg 36 ton
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Ravne 630T forging press manufactured?
This Ravne 630T forging press was manufactured in 1980.
What is the capacity of this equipment?
This equipment has a capacity of 630 tons.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | April 7, 2026 |
Type Trimming press
Manufacturer Ravne
Model 630T
Year of manufacture 1980
Pressing capacity 630 ton
Height above floor 4950 mm
Stroke per minute 42
Stroke 250 mm
Table size (lxb) 1690 x 1200 mm
Total power consumption 37 kW
Overall size (lxbxh) 2500 x 1300 x 4950 mm
Total weight in kg 36 ton
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Ravne 630T forging press manufactured?
This Ravne 630T forging press was manufactured in 1980.
What is the capacity of this equipment?
This equipment has a capacity of 630 tons.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Power in tons | 630 T |
| Table length | 1690 mm |
| Table width | 1200 mm |
| Nbr of strokes/min | 42 |
| Engine Power | 37 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | Ravne 630T |
| Last availability date | 31/03/2026 |
This listing features a Ravne 630T trimming press, a robust industrial machine designed for heavy-duty forging operations. Manufactured in 1980, this press offers a substantial pressing capacity of 630 tons, making it suitable for demanding trimming and sizing tasks. The machine's table measures 1690 mm in length and 1200 mm in width, providing a sizable work surface for various applications.
The press operates at a rate of 42 strokes per minute, with a stroke length of 250 mm, enabling efficient and consistent production cycles. It is powered by a 37 kW engine, which drives the machine's operations. The overall dimensions of the press are 2500 mm in length, 1300 mm in width, and 4950 mm in height, with a total weight of approximately 36 tons.
The press is painted green with yellow components, including the ram and flywheel, which are visible features of the machine. It has a bolted frame construction and a large flywheel that contribute to its sturdy build. The machine is positioned indoors near windows, allowing for natural light in the workspace.
Several metal fixtures and tooling are attached to the press table, indicating its readiness for forming operations. Safety features include two red emergency stop buttons located on each side of the press frame. An electric motor is mounted on the top left side of the press, supporting its mechanical functions.
The surface of the machine shows signs of industrial use with some wear and dirt, which is typical for equipment of this nature. However, in certain areas, the paint appears relatively fresh with minimal visible wear. No control panel or additional accessories are visible in the current setup. A wooden ladder is seen leaning against the left side of the press, likely for maintenance access.
This Ravne 630T trimming press is a substantial piece of equipment suitable for industrial forging environments requiring high pressing capacity and reliable performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | April 7, 2026 |
Преса за отрязване на облоя Ravne 630T
Ořezávací lis Ravne 630T
Ravne 630T Afgratningspresse
Ravne 630T Entgratpresse
Πρέσα απογρέζωσης Ravne 630T
Forging Press Ravne 630T
Prensa de desbarbado Ravne 630T
Presse d’ébavurage Ravne 630T
Preša za uklanjanje srha Ravne 630T
Ravne 630T Sorjázó prés
Pressa di sbavatura Ravne 630T
Ravne 630T Šerpetų šalinimo presas
Ravne 630T Ontbraampers
Prasa do gratowania Ravne 630T
Prensa de rebarbação Ravne 630T
Presă de debavurare Ravne 630T
Ravne 630T Обрезной пресс для удаления облоя
Presa za uklanjanje srha Ravne 630T
Ravne 630T Avgradningspress
Çapak alma presi Ravne 630T
EN
- Languages
English (GB)