Contact us to receive an offer.
| Manufacturer | QUASER |
|---|---|
| Model | MK603SP/12B |
| Year | 2011 |
| Location | Switzerland
|
This listing is for a QUASER MK603SP/12B vertical machining center manufactured in 2011. The machine features two tables, each measuring 1050 mm in length and 550 mm in width, with a maximum table load of 300 kg. It offers substantial machining capacity with longitudinal (X-axis) travel of 1020 mm, transversal (Y-axis) travel of 610 mm, and vertical (Z-axis) travel of 600 mm. The spindle nose conforms to ISO 40 standards, with a spindle diameter of 70 mm and a distance from the vertical spindle to the table ranging from 130 to 730 mm. Spindle speeds are stepless, ranging from 80 to 12,000 rpm, powered by a spindle motor rated at 22 kW, capable of delivering a maximum torque of 192 Nm.
The tool magazine accommodates 48 tool pockets, supporting tools up to 75 mm in diameter (125 mm with free adjacent pockets), 300 mm in length, and a maximum tool weight of 7 kg. Tool change time is approximately 2.5 seconds, with an average chip-to-chip time of 6 seconds. Feed rates reach up to 20,000 mm/min with rapid traverse speeds of 36 m/min.
Additional features include a 400-liter coolant system with coolant through spindle capability at 20 bar, a chip conveyor mounted on the left side, a spindle oil cooler, and electronic handwheel control. Interfaces include serial port RS 232 and Ethernet connectivity. The machine requires a 3-phase 400 Volt power supply at 50 Hz and an air connection of 6 to 8 bar, with a total power requirement of 45 kVA. Overall machine dimensions are 4650 mm in length, 2930 mm in width, and 3300 mm in height, with a weight of approximately 12,000 kg.
The machine is equipped with a FANUC Series 18-MB control panel featuring a screen, multiple buttons, dials, and an emergency stop button. A handheld pendant control labeled 'Tosoku' with an emergency stop and key switch is also included. The exterior shows minor wear and paint chips at the base, while the interior and machining table exhibit signs of use such as paint chipping and some discoloration. The tool changer carousel has numbered tool holders and shows some paint wear but appears functional. Hydraulic and pneumatic lines are connected to the tool changer mechanism. The coolant pump and motor appear clean and well maintained, and additional motors and control boxes are visible. Overall, the machine presents as clean and in good condition with no visible major damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data
Number of tables 2
Table length 1050 mm
Table width 550 mm
Table load max. 300 kg
Longitudinal travel (X-axis) 1020 mm
Transversal travel (y-axis) 610 mm
Vertical travel (z axis) 600 mm
Dimension of the workpice:
Height 350 mm
Diameter 1630 mm
Tool magazine number of tool places 48
Tool diameter max. 75 mm
Diameter with free adjacent pockets 125 mm
Tool lenght 300 mm
Max. tool-weight 7 kg
Time of tool changing 2.5 sec
Average chip-to-chip time 6 sec
Spindle nose: ISO 40
Pull-Studs DIN 69871
Distance from vertical
spindle to table 130 - 730 mm
Spindle diameter 70 mm
Spindle speeds:
stepless
from 80 rpm
up to 12000 rpm
Torque max. 192 Nm
Feed range 20000 mm/min
Rapid traverse: 36 m/min
Air connect 6 - 8 bar
Voltage 50 Hz 3x 400 Volt
Spindle power 30 / 22 kW
Total power required 45 kVA
Machine's weight about 12000 kg
Overall dimensions machine:
Length 4650 mm
Width 2930 mm
Height 3300 mm
Various accessories:
Coolant system 400 l
Coolant through spindle (cts) 20 bar
Chip conveyor
Handwheel electroinic
Spindle oil cooler
Interface serial port RS 232
Interface Ethernet
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Oct. 30, 2026 |
Technical data
Number of tables 2
Table length 1050 mm
Table width 550 mm
Table load max. 300 kg
Longitudinal travel (X-axis) 1020 mm
Transversal travel (y-axis) 610 mm
Vertical travel (z axis) 600 mm
Dimension of the workpice:
Height 350 mm
Diameter 1630 mm
Tool magazine number of tool places 48
Tool diameter max. 75 mm
Diameter with free adjacent pockets 125 mm
Tool lenght 300 mm
Max. tool-weight 7 kg
Time of tool changing 2.5 sec
Average chip-to-chip time 6 sec
Spindle nose: ISO 40
Pull-Studs DIN 69871
Distance from vertical
spindle to table 130 - 730 mm
Spindle diameter 70 mm
Spindle speeds:
stepless
from 80 rpm
up to 12000 rpm
Torque max. 192 Nm
Feed range 20000 mm/min
Rapid traverse: 36 m/min
Air connect 6 - 8 bar
Voltage 50 Hz 3x 400 Volt
Spindle power 30 / 22 kW
Total power required 45 kVA
Machine's weight about 12000 kg
Overall dimensions machine:
Length 4650 mm
Width 2930 mm
Height 3300 mm
Various accessories:
Coolant system 400 l
Coolant through spindle (cts) 20 bar
Chip conveyor
Handwheel electroinic
Spindle oil cooler
Interface serial port RS 232
Interface Ethernet
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a QUASER MK603SP/12B vertical machining center manufactured in 2011. The machine features two tables, each measuring 1050 mm in length and 550 mm in width, with a maximum table load of 300 kg. It offers substantial machining capacity with longitudinal (X-axis) travel of 1020 mm, transversal (Y-axis) travel of 610 mm, and vertical (Z-axis) travel of 600 mm. The spindle nose conforms to ISO 40 standards, with a spindle diameter of 70 mm and a distance from the vertical spindle to the table ranging from 130 to 730 mm. Spindle speeds are stepless, ranging from 80 to 12,000 rpm, powered by a spindle motor rated at 22 kW, capable of delivering a maximum torque of 192 Nm.
The tool magazine accommodates 48 tool pockets, supporting tools up to 75 mm in diameter (125 mm with free adjacent pockets), 300 mm in length, and a maximum tool weight of 7 kg. Tool change time is approximately 2.5 seconds, with an average chip-to-chip time of 6 seconds. Feed rates reach up to 20,000 mm/min with rapid traverse speeds of 36 m/min.
Additional features include a 400-liter coolant system with coolant through spindle capability at 20 bar, a chip conveyor mounted on the left side, a spindle oil cooler, and electronic handwheel control. Interfaces include serial port RS 232 and Ethernet connectivity. The machine requires a 3-phase 400 Volt power supply at 50 Hz and an air connection of 6 to 8 bar, with a total power requirement of 45 kVA. Overall machine dimensions are 4650 mm in length, 2930 mm in width, and 3300 mm in height, with a weight of approximately 12,000 kg.
The machine is equipped with a FANUC Series 18-MB control panel featuring a screen, multiple buttons, dials, and an emergency stop button. A handheld pendant control labeled 'Tosoku' with an emergency stop and key switch is also included. The exterior shows minor wear and paint chips at the base, while the interior and machining table exhibit signs of use such as paint chipping and some discoloration. The tool changer carousel has numbered tool holders and shows some paint wear but appears functional. Hydraulic and pneumatic lines are connected to the tool changer mechanism. The coolant pump and motor appear clean and well maintained, and additional motors and control boxes are visible. Overall, the machine presents as clean and in good condition with no visible major damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Oct. 30, 2026 |
Вертикален обработващ център QUASER MK603SP/12B
Vertikální obráběcí centrum QUASER MK603SP/12B
QUASER MK603SP/12B Lodret bearbejdningscenter
QUASER MK603SP/12B Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας QUASER MK603SP/12B
QUASER MK603SP/12B Vertical machining center
Centro de mecanizado vertical QUASER MK603SP/12B
Centre d'usinage vertical QUASER MK603SP/12B
Vertikalni obradni centar QUASER MK603SP/12B
QUASER MK603SP/12B Függőleges megmunkáló központ
Centro di lavoro verticale QUASER MK603SP/12B
Vertikalus apdirbimo centras QUASER MK603SP/12B
QUASER MK603SP/12B Verticaal bewerkingscentrum
Pionowe centrum obróbcze QUASER MK603SP/12B
Centro de maquinação vertical QUASER MK603SP/12B
Centru de prelucrare vertical QUASER MK603SP/12B
QUASER MK603SP/12B Вертикальный обрабатывающий центр
Vertikalni obradni centar QUASER MK603SP/12B
QUASER MK603SP/12B Vertikalt bearbetningscenter
Dikey işleme merkezi QUASER MK603SP/12B
EN
- Languages
English (GB)