Used Packaging Machines in Belgium for Sale 18

Overview: Robotic end-of-line palletizing system from a wine bottling plant consisting of two ABB FlexPalletizer robot cells, an empty-pallet destacker, a Strapex SWR 30 rotating-ring stretch wrapper with its chain conveyor, and the safety fencing of the installation. The robots stack packed cases onto pallets fed from the destacker; the loaded pallets run on the chain conveyor through the wrapper. Viewing available by appointment. Manufacturer: ABB Robots: 2 x ABB FlexPalletizer, 4-axis, each with its own ABB robot controller Gripper clearance: 1,200 x 240 mm Pallet size handled by the destacker: 1,100 x 1,200 mm Stretch wrapper: Strapex SWR 30, rotating ring, film width 500 mm, clearance diameter 2,000 mm Wrapper pallet loads: 1/4 EURO, 1/2 EURO, EURO and 1,200 x 1,000 mm, load height up to 2,400 mm Film: pre-stretched LLDPE, pre-stretch levels 160 %, 230 % and 260 %, ring rotation 18 rpm Wrapper connection: 3 x 400 V, 50 Hz; compressed air 6 bar Scope of Delivery: Palletizing robot ABB FlexPalletizer 4-axis, two units; robot dimensions 2,600 x 1,200 x 3,680 mm with control unit 700 x 660 x 1,050 mm; spare gripper on steel frame (1,340 x 610 x 640 mm); Pallet destacker steel roller conveyor …

Manufacturer: KHS Model: Innopack SP Year of manufacture: 2006 Machine type: Pick-and-place case packer Primary application: Bottle packing in cases (wine bottling and packaging line) Bottle infeed: Four lanes, lane width 85 mm Gripper head: 2 x 18 bottle tulips; formation 3 x 6 bottles Case clearance: 175 x 400 mm Packer power supply: 400 V, 3 Ph, 50 Hz, 27 A Robot controller: KUKA KR C2 Robot controller power: 400 V, 3 Ph, 50/60 Hz, 8 A Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm Change-part trolleys: 4 units Change-part trolley dimensions: 2,050 x 1,300 x 2,100 mm each Base equipment: Base frame with lifting column, counterweight and lifting unit Conveyors: Cross conveyor and shifting carriage for the gripper head Gripper features: Gripper head with pneumatic bottle tulips Centring system: Centring device for the cases in the packing zone Infeed table: Four-lane bottle infeed table with lane guides In/Outfeed conveyors: Case infeed and outfeed conveyors Enclosure and safety: Enclosure with windowed doors and safety fencing Control cabinet: KUKA KR C2 controller cabinet and KCP teach pendant on stand KHS control cabinet: KHS control cabinet Operating manual: Dutch available Condition: As-is, where-is Installation status: Still …

Offer title: KHS Innopack CA-1 Cardboard Erector (2006) Manufacturer: KHS Model: Innopack CA-1 Year of manufacture: 2006 Machine type: Carton erector with bottom gluing Function: Forms cartons from flat blanks and closes bottom with hot-melt glue Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps Power supply: 400 V, 3 Ph, 50 Hz, 15 A Compressed air: min. 5 bar operating pressure Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm Blank infeed: Roller conveyor with stainless steel rollers; width 1,000 mm; infeed clearance 800 x 450 mm Outfeed: Roller conveyor with stainless steel rollers; width 300 mm; 3,050 x 650 x 880 mm Equipment: Stack preparation with automatic loading of the blank magazine; blank magazine with lifting device, side guides and front and rear stops Pick-up and erecting stations: Vacuum suction grippers and vacuum unit Bottom processing: Folding, gluing, closing and pressing devices for the carton bottom Adjustments: Side and height adjustment by handwheel for different carton sizes Enclosure: Windowed safety doors Operator panel: Display, keypad, start/stop, key switch and emergency stop; operator texts in French Control: Control cabinet and pneumatic service unit Certification: CE marked Manual: Operating manual available (Dutch) …

Manufacturer Webomatic width (mm) 810 Depth (mm) 860 Volt 400 Hz 50 Stainless steel Type TL250 Built in the year 2019 Hight (mm) 1730 Mono / 3 phase 3 phase kW 3 Weight machine 380kg

Overview The crater was used in a Belgian brewery and was stopped in Summer 2024. It was used to put 330ml bottles with mechanical closure into a wooden or plastic crate. Technical Details Manufacturer: TMG Year of manufacture: 2018 Model: IEC 61439-2 Bottle Format: 330ml Crate format: 4x3 wooden or plastic crate Capacity: 8 cycles per minute

Feeding Systems / Mixer Feeder Lorries CE compliant: yes Mixing volume: 18 m³ Drive: PTO, hydraulic discharge conveyor PTO: included Discharge conveyor: Right Discharge conveyor width: 1400 mm Weighing module with digital display: PTM FC20 Towing eye diameter: 52 mm Number of axles: 1 Tire size: 385/65R22.5 Tire brand: Bridgestone/Semperit Equipped with: double floor, 12 service hatches Minimum tractor power: 60 kW Overall dimensions: 6600x2600x2850 mm Curb weight: unknown Condition: signs of use, without vehicle documents