GlobePack Equipment Ltd Top seller

Machine type: Rotary accumulation table Table diameter: 1,000 mm Electrical supply: 240 V, 13 A Machine dimensions: 1,070 × 1,070 × 1,250 mm (H) Weight: 125 kg Description: Motorized rotary platform designed to temporarily buffer packaged goods, bottles, pouches, and containers on production or packaging lines. Helps maintain a steady product flow and reduce bottlenecks. Technical condition: As-is, where-is

The Russell Compact 600 is a mid‑range, high‑capacity vibratory sieve designed for efficient, hygienic, and space‑saving screening operations. It quickly removes contamination from powders and liquid slurries. It does not need any tools to disassemble and is extremely quiet. The contact parts are easy to clean and change overs are quick. As it uses only half the space of a traditional vibratory sieve it is ideal for fitting into existing production lines. It is used in a range of applications including pharmaceutical powders, various food powders and powder paint. This sieve is equipped with Russell Superclamps which are a patented quick-release clamp that gives consistent clamping pressure. It overcomes problems with frequently re-adjusting underclamps as gaskets wear or you change mesh frames. These self-adjusting clamps increase the life of clamp pads, seals and gaskets, as well as minimize heat generation and damage to the vibratory screener sieve deck mating surfaces. Atex rated to CML14A ATEX6115 Supply 415V 3Ph 16A Machine size: 1000mm x 700mm x 1250mm high, approx, weight 100kg Supplied cleaned, checked and tested dry cycling

Manufacturer: Weiler Model: ASEP-TECH 640 Blow Fill Seal Year of Manufacture: 2022 Condition: As-Is, Where-Is Refurbishment: OEM refurbishment by Weiler Engineering in 2022 Current Configuration: 48-cavity operation configured for 1 mL and 5 mL LDPE containers with electronic filling and SVP/respule applications Cavities: 48 Container Sizes: 1 mL and 5 mL Container Material: Low-Density Polyethylene (LDPE) Tooling Included: 1 mL tooling and 5 mL tooling Parison Head: 8-cavity non-programmable Filling System: Electronic filling system SVP/Respule Tooling: New SVP/respule tooling installed Assemblies Refurbished: Numerous machine assemblies renewed or refurbished Controls: New controls installed as part of the 2022 refurbishment Inspection: Available for inspection in the United States Typical BFS Applications: Small-volume parenterals, ophthalmic products, respiratory solutions, saline solutions, sterile water, unit-dose liquids Process Overview: Blow Fill Seal technology forming, filling and sealing a container within a single automated sequence Resin Used: LDPE

Rommelag Model 3012 Blow-Fill-Seal Machine The Rommelag 3012 BFS machine is a packaging machine manufactured by Rommelag's bottelpack division for the aseptic production of plastic containers and the filling of sterile liquid products in a single, automated process It is used in the pharmaceutical, healthcare, and specialty chemicals industries and can do a wide variety of products such as ophthalmic solutions (eye drops), respiratory solutions and nebules, and small dose healthcare products This machine has been well maintained and successfully used for the production of ophthalmic products and remained in production until June 2026 It is a proven and reliable BFS system with a long production history, current validation, and flexible filling capabilities Key Information 1 parison, 6 cavity configuration Fill volume capability: 10ml, 20ml and 30ml Speed of 3,300 strips per hour in current set up Configured for the manufacture of ophthalmic products Validation certificate until November 2026 Bulk feed hopper and pellet transfer pump included Selection of spare parts included (see photos) Operation and electrical manuals in paper form available Multiple mould sets included: a. 1 x tool for 10-20ml screw cap b. 1 x tool for 20-30ml twist off c. 1 tool for 6 x 10ml in …

Mediseal Klöckner Medipak CP-400 and P-3000 Blister Packing Line Klöckner Medipak CP-400 Blister Former A high performance blister packaging machine designed for the pharmaceutical industry Serial number 774058, year of manufacture 2001 Currently set up for PVC/ALU film Speeds of up to 400 blisters per minute depending on blister format Key Information: Maximum film width: 160mm Maximum roll diameter: 500mm Core diameter: 70-76mm Two roll holders for thermoforming film with film spreader and gluing device for roll change during operation Pull-off length: 140-220 mm in thermoforming range Drawing depth: PVC maximum 12 mm, ALU maximum 9.5 mm Feeding system: directional tablet feed and brush box (without format parts) Film heating: for PVC, includes shrinkage compensation Film tear control: for ALU Aylward single width feeder frame (no feeder tooling supplied) Touchscreen control panel Additional features: signing station, perforating station, fill control with color camera Scanware Format tools: without any format tools in the film run (forming, sealing, signing, perforating, punching) Drive: 220/400V/50Hz HAPA 230 lidding foil printer CE Marked Klöckner Medipak P-3000 Cartoner Sideloading cartoning machine Serial number 765055, year of manufacture 2001 Key Information: Maximum output: 300 cartons/min, adjustable speed GUK PA 21/3 leaflet folder, new 2001 No carton suction …

Bench Top Filling, Capping and Labelling Line Current Set Up: 18mm diameter and 43mm high bottle 17mm diameter cap 5ml fill volume at 120 per minute Bottle size range: 18mm minimum to 50mm maximum diameter and up to 140mm high Cap size range: 15mm minimum to 25mm maximum diameter Monoblock Liquid Filling and Capping Machine Make: Mecatech Services Model: FC1055 Serial number: 289898F01 Delta PLC Delta DOP-107EG HMI Supply: 240V 1ph 13A, 4bar pneumatic Built in infeed rotary table Caps are placed by hand after the fill Change parts included as follows: - star wheels 18mm, 20mm, 40mm & 50mm - cap chucks 15mm, 17mm, 24mm & 25mm - nozzles 6mm and 8mm Machine size: 1100mm x 650mm x 750mm high Single Sided Wrap Labeller Serial number: 128789F04-1 Supply: 240V 1ph 6A Machine size: 1900mm x 1100mm x 560mm high Peristaltic pump Model: FT1052 Serial number: 299794F03 Supply: 240V 1ph 6A Peristaltic filling pump using 10mm OD silicon tubing 8mm ID Supplied: cleaned, checked and tested

*This machine has had a full electrical upgrade carried out by Weiler* ASEP-TECH® Blow/Fill/Seal systems integrate container forming, filling, and sealing into a single sterile operation, reducing contamination risk and production steps. Designed for Small Volume Parenterals (2-100 mL) and Large Volume Parenterals for intravenous and irrigation applications, these systems produce lightweight, breakage-resistant, particle-free, and recyclable containers from autoclave-safe resins. Customizable features include luer locks, twist-off tops, multi-entry configurations, and integral hangers - ideal for injectables, vaccines, anesthetics, and lyophilized medication reconstitution. The Weiler Blow/Fill/Seal machines produce plastic aseptically packaged sterile-filled containers. Fill volumes range from 0.2mL vials to 1000mL LVP bottles. Typical resins used are L.D.P.E., H.D.P.E. and P.P. The B/F/S process creates sterile finished product in a matter of seconds. B/F/S (Blow/Fill/Seal) technology is a groundbreaking method that ensures the highest levels of sterility in aseptic processing. Its versatility allows for applications across various industries, enhancing both efficiency and compliance. Every step, from handling to closure, is optimized for maximum sterility assurance, with zero human intervention Overview of Operation: Thermoplastic resin granules are extruded and formed into a parison (tubular shape) Molds and sterile air are used to form containers from the parison The sterile product is then …

Weiler ASEP-TECH Model 624 Blow/Fill/Seal Machine The model 624’s smaller footprint offers flexibility and efficiency, perfect for limited-space environments With servo-controlled fill motion and optional isolation insertion, it guarantees accuracy and sterility in each production cycle The Model 624 produces containers from 0.2mL to 500mL, offering great value and performance Overview of Operation: Thermoplastic resin granules are extruded and formed into a parison (tubular shape) Molds and sterile air are used to form containers from the parison The sterile product is then metered into the containers which are then hermetically sealed This cycle occurs continuously as formed, filled and sealed containers are conveyed out of the machine Refurbishment Options: PLC upgrade only PLC upgrade and additional items: New product filtration w/buffer tank Overhead HEPA New remote deflasher Example Scope of Work for Refurbished Machines: Control System Upgrade with Data Management New Safety Labels New Safety Door Switch Upgrade New Hydraulic Safety High/Low Circuit Upgrade Add Particulate Counter (Optional) Add Viable Sampling Tube (Optional) Mold Carriage Renewed Various format parts and tooling in stock and available immediately

Weiler ASEP-TECH Model 624 Blow/Fill/Seal Machine The model 624’s smaller footprint offers flexibility and efficiency, perfect for limited-space environments With servo-controlled fill motion and optional isolation insertion, it guarantees accuracy and sterility in each production cycle The Model 624 produces containers from 0.2mL to 500mL, offering great value and performance Overview of Operation: Thermoplastic resin granules are extruded and formed into a parison (tubular shape) Molds and sterile air are used to form containers from the parison The sterile product is then metered into the containers which are then hermetically sealed This cycle occurs continuously as formed, filled and sealed containers are conveyed out of the machine Refurbishment Options: PLC upgrade only PLC upgrade and additional items: New product filtration w/buffer tank Overhead HEPA New remote deflasher Example Scope of Work for Refurbished Machines: Control System Upgrade with Data Management New Safety Labels New Safety Door Switch Upgrade New Hydraulic Safety High/Low Circuit Upgrade Add Particulate Counter (Optional) Add Viable Sampling Tube (Optional) Mold Carriage Renewed The current parison installed is 12 cavity, previously used for producing ophthalmic dropper bottles. We have different parison's in stock for different product/container types. Please ask for further details. Various format parts and tooling …