iDirect Series 15152 Universal Satellite Hub (5IF/20 Slot) Qty 1 Quintech (LS) active splitter Qty 1 Quintech (LC) active combiner Qty 2 iDirect Dell R610 PP servers Qty 2 iDirect Dell R610 NMS servers Qty 2 iDirect IBM X3550 NMS servers Qty 2 iDirect IBM X3550 PP servers Qty 2 Quintech 24VDC power supply redundant Qty 2 iDirect XLC-11 Qty 3 iDirect XLC-M The Series 15100 Universal Satellite Hub is ideal for service providers operating multiple high performance IP broadband networks. More powerful and future-ready, it incorporates the latest advances in performance, enabling network operators and military service providers to deliver the highest quality connectivity regardless of bandwidth requirements. Smart Design With Great Scalability The chassis houses up to 20 line cards, providing a very modular approach to growth. Operators can start off with just a few remotes in one network and easily scale to several thousand remotes on multiple networks. Equipped with 5 intermediate frequency (IF) interfaces accessing C, Ku, or Ka Band on up to 5 satellites, the Series 15100 brings a new level of scalability designed for growth and performance. Maximum Flexibility and Greater Bandwidth Efficiencies The Series 15100 Universal Satellite Hub is highly flexible, supporting an …
We have a unused new Cobham SeaTel 9797B-70 2.4 Meter C-Band 3-Axis Marine Stabilized Antenna System. It is a complete Kit that comes with a Codan 60W C-Band BUC, SeaTel DAC-2202 tracking antenna control unit and a used Aircon Radome second Generation BTU
X2 Still in the original box Comtech EF Data CDM-760 Advance High Speed Trunking Modem DVB-S2 and DVB-S2, 70/140 MHz + L-Band 8PSK, Carrier-N-Carrier Board (Hardware only) K4 GZIP Payload Compression Board (Hardware) Carrier-in-Carrier 275 Mbps Data Rate (Fractional License) Like new but was opened for AnaTel certification and used for homologation by the Brazilian Telecommunication Agency (AnaTel) so has some small scratches.
This Agilent 83620B Signal Generator is a used, fully functional Swept Signal Generator, with a frequency range of 10MHz to 20GHz. We use this and similar Signal Generators to allow accurate testing of any device that requires an accurate frequency input. It is impossible in this short space to list all of the features of this Agilent 83620B Signal Generator but the overview: Storage temperature range: –40 °C to 75 °C Operating temperature range: 0 °C to 55 °C Environmental EMC: Within limits of CISPR Pub.11/1990 Group 1, Class A, and Mil-Std-461C Part 7 RE02 Warm-up time Operation: Requires 30-minute warm-up from cold start at 0 °C to 55 °C. Internal temperature equilibrium reached after two-hour warm-up at stable ambient temperature. Frequency reference: Reference time base is kept at operating temperature with the instrument connected to AC power. Instruments disconnected from AC power for more than 24 hours require 30 days to achieve time base aging specification. Instruments disconnected from AC power for less than 24 hours require 24 hours to achieve time base aging specification. Power requirements 48 to 66 Hz; 115 volts (+10/–25%) or 230 volts (+10/–15%); 400 VA maximum (30 VA in STANDBY) Weight and dimensions Net …
Used Andrew 7.3M C/Ku-Band Linear Rx Only Motorized Earth Station Antenna This is a 7.3 Meter 2-Port C-Band & 2-Port Ku-Band Receive Only Motorized Antenna includes: 2-Port C-Band Linear Feed 2-Port Ku-Band Feed Motorized with ETS AC3000 Antenna Controller Tripod Antenna Mount
Huaxin 6.2M C-band antennae Model: High Wind 2-Port / Linear / Circular/ Tracking Transmit System: – 5.850~6.725 GHz Receive System: 3.4 – 4.2 GHz The following antennas are located near Europe and Asia 5 X 7.2M Vertex C band antennae. 2 X 11M Vertex C band antennae. 2 X 9M Vertex Ku band antennae. 1 X 9M Vertex C band antennae. 1 X 6.2M Probecom Ku band antennae 4-port. 1 X 6.2M Huaxin C band antennae 2-port.
7.2m Cassegrain Antenna Vertex 7.2M KXC-200 High Wind (180mph any position/ 210mph at stow) with solar diffusive white reflector front surface MFCode:10990-1 Galvanised Kingpost pedestal 180 degree in Az (2 pos.); elevation 5-90 degree Standard C-band 4 port Linear Polarized Feed, TX/RX 2 RX 3625-4200MHz, 2 TX 5850-6425MHz Axis Cross-over; dual Tx from axis to feed flange. (1kW per port power capability) Servo interface kit; drive motors for AZ, EL & polarization, limit switches & transducers for model 7200 Controller. C-band Receive Subsystem 2+1 LNA swithcing & control w/ control cable GSI LRC-1200 35°K LNA (3.625-4.2GHz) Transmit Reject Filter Radio Altimeter Filter Tracking Receiver Vertex DTR Antenna Control Antenna Drive Unit Vertex 7150 Portable Maintenance Control Unit Vertex PMCU Antenna Control Unit (ACU) w/ control cable Vertex 7200
We have a C-Band uplink system for sale: ASC 6.5 M C-Band Uplink Antenna Model: ES65-2 It has both Horizontal and Vertical TX waveguides installed (only one is hooked up to the redundant SSPA switch). The other is capped. There are also H and V LNBs for Rx return use. Purchased in 2010 RSI Controller (Az, El, Pol) RSI Remote Controller Dual 70 MHz to L-Band Up Converters Paradise 30 Watt redundant SSPAs (BUC w/ L-Band input) HPAC-2030-ACPB Redundant C-Band System SSPA SN: 20344*, 20344* Changeover Switch Model: HPAC2030ACP F001 Paradise Transmitter Remote Controller RCP2-1100 (1:1 Redundant System Controller)
ISP in Nigeria has a Used iDirect Series 15100 Universal (5IF/20 Slot) Satellite Hub for sale It’s an ACTIVE HUB, but currently off-line due to Vsat business slowdown Serial number of the hub E000121* Date of purchase of the hub 30th June 2013 Date of shipment of the hub from iDirect 12 September 2013 iDirect original hub Equipment Qty 4 Dell Power Edge 420 Qty 1 IDirect Hub Chasis 5IF Qty 2 Line Card XLC-11 Qty 2 Line Card XLC-M I’m looking at USD 76,000 Negotiable to sell the HUB It’s a working hub till satellite Amos 5 disappeared in the space Regarding the timing group, activity Currently have 4 line cards Line Card XLC-11 2 nos Line Card XLC-M 2 nos
We have a used Andrew 7.3 Meter C-Band 4-Port Earth Station Antenna has an outdoor control box that has been disabled and control is handled by three paddle switches that handle the three axis control functions. We tested the antenna control to verify that the paddle controls work and that the motors are functional.
We have 2 Vertex 4 port C-Band Diplexer in stock. They come with the convoluted rectangular waveguides that straighten out the port arrangement (see attached photo). Unless your customer is replacing a damaged unit, he really would want and need these pieces. The operating bandwidth of a 106824 is TX: 5.85-6.4215 and RX: 3.625 -4.200 GHz. Some may still consider that as extended band (575 MHz), but in today’s world it’s always good to check as there are other extended ba
4.6m Transportable trailer mounted GD Satcom antenna, 4.6m GDSatcom Ka DBS Ku X C transportable, 4.6m GDSatcom Ka DBS Ku X C transportable, 4.6m GDSatcom Ka DBS Ku X C transportable 4.6m GDSatcom Ka DBS Ku X C transportable Antenna with Trailer.
iDirect Evolution XLC-11 Line Card is a used line card taken from a working hub. It is offered with a guarantee that it will perform as needed. OVERVIEW The Evolution® XLC-11 line card operates in either iNFINITI® TDM or DVB-S2/ACM on the outbound and supports the latest Spread Spectrum technology making it ideally suited for high-speed, high-performance business and mobile applications. DETAILS One modulator / one demodulator Evolution® DVB-S2 or iNFINITI® TDM on the outbound Extremely efficient inbound FEC with 2D 16-State coding Supports latest Spread spectrum technology Fits into any Universal Series 15000 or 12000 Hub chassis
Fitel S175 Fusion Splicer is a complete package offered in a custom made carrying case. The Fitel S175 is a direct core monitoring fusion splicer. The splicer automatically analyzes the fiber type from single mode (SM), multi mode (MM) and dispersion shifted (DS) and loads the suitable splice program. The Fitel S175 from Furukawa is made to splice silica glass-based optical fibers SMF, MMF, DSF and EDF (erium doped fiber). It can splice 0.25 to 0.9 mm coating and 0.1 to 0.15mm cladding. Single mode fiber can be spliced in as little as 20 seconds. We wanted a better explanation and this is what we found An instrument that splices fibers by fusing or welding them, typically by electrical arc. The process of fusion splicing involves using localized heat to melt or fuse the ends of two optical fibers together. The splicing process begins by preparing each fiber end for fusion. Fusion splicing requires that all protective coatings be removed from the ends of each fiber. The fiber is then cleaved using the score-and-break method. The quality of each fiber end is inspected using a microscope. In fusion splicing, splice loss is a direct function of the angles and quality …
We have 4 used Comtech CDM-760 high speed satellite modems, L-band, tested with a 1-year replacement warranty Guaranteed. Comtech EF Data CDM-760 Satellite Ultra Advanced High-Speed Trunking Modem, Used, Fully Tested, 1-Year Warranty The CDM-760 offers an expansive range of symbol rates (100 ksps to 150 Msps) and data rates (100 kbps to >720 Mbps) simplex. In a duplex setting, this is >1.4 Gbps or 300 Msps. The onboard Ethernet interfaces support Super Jumbo Frames from 64 Bytes to >10,000 Bytes and will process Ethernet frames at a blazing > 1.2 Million packets / second. With the optional Packet Processor card installed the CDM-760 can support > 350,000 packets per second while performing simultaneous Header Compression and QoS. Comtech offers a variety of open or closed network specifications and MODCOD selections. The CDM-760 can be configured to run as DVB-S2 (EN 302 307), DVB-S2X (EN 302 307-2) open standard waveforms, or with Comtech’s DVB-S2-EB1& EB2 (Efficiency Boost) waveforms. All waveforms are interoperable with ACM and the CDM-760 DPD (Dynamic Pre-Distortion). DPD allows satellite amplifiers to push further into saturation, maximizing transponder efficiency. The pre-distortion function is constantly optimized by the modem and does not require any user intervention. Implementing Adaptive …