Price on request
Make an offer| Metal length | 3000 mm |
| Power | 2500 W |
| Metal width | 1500 mm |
| Type | CO₂ |
| Option to cut tubes | no |
| Max thickness | 15 mm |
| CNC | yes |
| CNC type | Primach 20L |
| Travel X | 3000 mm |
| Travel Y | 1500 mm |
| Max weight of the workpiece | 250 kg |
| ------------------- | |
| Length x width x height | 12000.0 × 6000.0 × 3000.0 |
| Weight | 12000 kg |
| worked hours | 24800 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 25/02/2026 |
The Prima Power Platino 1530 is a CO₂ laser cutting machine manufactured by the Italian company Prima Power in 2012. It features a robust design with overall dimensions of 12,000 mm in length, 6,000 mm in width, and 3,000 mm in height, and weighs approximately 12,000 kg. The machine is equipped with a Rofin Sinar DC 025 CO₂ laser source delivering 2,500 W of power, operating at a wavelength of 10.6 µm. It utilizes a gas mixture consisting of helium, carbon dioxide, and nitrogen for laser generation.
The cutting area accommodates sheet metal up to 3,000 mm in length and 1,500 mm in width, with a maximum thickness of 15 mm and a maximum workpiece weight of 250 kg. The machine travels 3,000 mm along the X-axis and 1,500 mm along the Y-axis, providing precise cutting capabilities. Control is managed via a Primach 20L CNC system.
This laser cutter includes a protective enclosure with sliding transparent doors, ensuring operator safety while allowing clear visibility of the cutting process. The cutting bed is fitted with metal spikes to support sheet metal during operation. A control panel with an active screen and multiple buttons is situated on the right side of the machine for ease of operation. The machine exterior is predominantly blue with Prima Power branding and features warning labels indicating laser hazards, complying with CE safety standards.
Additional equipment includes a Water Chiller HYFRA svk 320-1-s and a Donaldson Torit DCE dedusting system to maintain optimal operating conditions. The machine shows minor signs of use, such as some discoloration and marks on the cutting bed and slight wear on the cutting head and guide rail, but overall appears clean and well maintained. This model is suitable for precision cutting of metal sheets within its specified size and thickness limits.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The PRIMA POWER PLATINO 1530 laser cutter was built by the Italian company Prima Power in 2012. It has a Primach 20L CNC control and a Rofin Sinar DC 025 CO2 laser with a power of 2.5 kW and a wavelength of 10.6 um. The laser cutter allows you to cut sheet metal with the maximum dimensions of 3000 x 1500 mm, 15 mm thick and weighing 250 kg. The laser gas consists of He, CO2 and N2. In addition, the equipment includes, among others, the Water Chiller HYFRA svk 320-1-s, as well as the Donaldson Torit DCE dedusting system.
Technical parameters of the PRIMA POWER PLATINO 1530 laser cutter
- machine time worked: 24800 hours
- power: 2500.0 W
- CNC control: Primach 20L
- X travel: 3000.0 mm
- Y travel: 1500.0 mm
- working area: 3000 x 1500 mm
- maximum sheet length: 3000.0 mm
- maximum sheet width: 1500.0 mm
- maximum sheet thickness: 15.0 mm
- maximum load on the table: 250.0 kg
- machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm
- machine weight: 12000.0 kg
Rofin Sinar DC 025 CO2 laser specification
- type: CO₂
- laser: Rofin Sinar DC 025
- power: 2,500 Watt
- power stability: + -2% FS
- wavelength: 10.6 µm
- gas type: He 67.7%; CO2 4.1%; N2 28.2%
- beam propagation factor M2: 250 microseconds, 70 used resolutions
- positioning accuracy: + -150 radians
- operating conditions: maximum / minimum ambient temperature 40 degrees C / 10 degrees C
- relative humidity: <95% non-condensing
- diode laser wavelength: 635 nanometers
- diode laser output power: <1 milliwatt
Cooling:
- required cooling capacity: 31 kW
- Flow Rate: 133 LPM (35 GPM)
- inlet temperature: 18 - 20 degrees C
- maximum inlet pressure: 6 Bar
- nominal inlet pressure: 3 Bar
- pressure difference: 2 Bar
- liquid: distilled water
- filter requirements: 100 microns
Connections:
- water: hose connector 1.25 "
- gas inlet: 6mm tube nipple
- exhaust: 0.5 "pipe nipple
- drain: pipe connector 8 mm 8
CO2 laser dimensions and weight:
- width: 850 mm
- height: 887 mm
- length: 2551 mm
- weight: 1140 kg
Additional parameters and accessories of the PRIMA POWER PLATINO 1530 laser
- compliance with CE standards
- protective cabin
- light barrier
- CE safety
- Water Chiller HYFRA svk 320-1-s
- Donaldson Torit DCE dedusting system
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 378 |
| Last activity | March 9, 2026 |
The PRIMA POWER PLATINO 1530 laser cutter was built by the Italian company Prima Power in 2012. It has a Primach 20L CNC control and a Rofin Sinar DC 025 CO2 laser with a power of 2.5 kW and a wavelength of 10.6 um. The laser cutter allows you to cut sheet metal with the maximum dimensions of 3000 x 1500 mm, 15 mm thick and weighing 250 kg. The laser gas consists of He, CO2 and N2. In addition, the equipment includes, among others, the Water Chiller HYFRA svk 320-1-s, as well as the Donaldson Torit DCE dedusting system.
Technical parameters of the PRIMA POWER PLATINO 1530 laser cutter
- machine time worked: 24800 hours
- power: 2500.0 W
- CNC control: Primach 20L
- X travel: 3000.0 mm
- Y travel: 1500.0 mm
- working area: 3000 x 1500 mm
- maximum sheet length: 3000.0 mm
- maximum sheet width: 1500.0 mm
- maximum sheet thickness: 15.0 mm
- maximum load on the table: 250.0 kg
- machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm
- machine weight: 12000.0 kg
Rofin Sinar DC 025 CO2 laser specification
- type: CO₂
- laser: Rofin Sinar DC 025
- power: 2,500 Watt
- power stability: + -2% FS
- wavelength: 10.6 µm
- gas type: He 67.7%; CO2 4.1%; N2 28.2%
- beam propagation factor M2: 250 microseconds, 70 used resolutions
- positioning accuracy: + -150 radians
- operating conditions: maximum / minimum ambient temperature 40 degrees C / 10 degrees C
- relative humidity: <95% non-condensing
- diode laser wavelength: 635 nanometers
- diode laser output power: <1 milliwatt
Cooling:
- required cooling capacity: 31 kW
- Flow Rate: 133 LPM (35 GPM)
- inlet temperature: 18 - 20 degrees C
- maximum inlet pressure: 6 Bar
- nominal inlet pressure: 3 Bar
- pressure difference: 2 Bar
- liquid: distilled water
- filter requirements: 100 microns
Connections:
- water: hose connector 1.25 "
- gas inlet: 6mm tube nipple
- exhaust: 0.5 "pipe nipple
- drain: pipe connector 8 mm 8
CO2 laser dimensions and weight:
- width: 850 mm
- height: 887 mm
- length: 2551 mm
- weight: 1140 kg
Additional parameters and accessories of the PRIMA POWER PLATINO 1530 laser
- compliance with CE standards
- protective cabin
- light barrier
- CE safety
- Water Chiller HYFRA svk 320-1-s
- Donaldson Torit DCE dedusting system
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Metal length | 3000 mm |
| Power | 2500 W |
| Metal width | 1500 mm |
| Type | CO₂ |
| Option to cut tubes | no |
| Max thickness | 15 mm |
| CNC | yes |
| CNC type | Primach 20L |
| Travel X | 3000 mm |
| Travel Y | 1500 mm |
| Max weight of the workpiece | 250 kg |
| ------------------- | |
| Length x width x height | 12000.0 × 6000.0 × 3000.0 |
| Weight | 12000 kg |
| worked hours | 24800 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 25/02/2026 |
The Prima Power Platino 1530 is a CO₂ laser cutting machine manufactured by the Italian company Prima Power in 2012. It features a robust design with overall dimensions of 12,000 mm in length, 6,000 mm in width, and 3,000 mm in height, and weighs approximately 12,000 kg. The machine is equipped with a Rofin Sinar DC 025 CO₂ laser source delivering 2,500 W of power, operating at a wavelength of 10.6 µm. It utilizes a gas mixture consisting of helium, carbon dioxide, and nitrogen for laser generation.
The cutting area accommodates sheet metal up to 3,000 mm in length and 1,500 mm in width, with a maximum thickness of 15 mm and a maximum workpiece weight of 250 kg. The machine travels 3,000 mm along the X-axis and 1,500 mm along the Y-axis, providing precise cutting capabilities. Control is managed via a Primach 20L CNC system.
This laser cutter includes a protective enclosure with sliding transparent doors, ensuring operator safety while allowing clear visibility of the cutting process. The cutting bed is fitted with metal spikes to support sheet metal during operation. A control panel with an active screen and multiple buttons is situated on the right side of the machine for ease of operation. The machine exterior is predominantly blue with Prima Power branding and features warning labels indicating laser hazards, complying with CE safety standards.
Additional equipment includes a Water Chiller HYFRA svk 320-1-s and a Donaldson Torit DCE dedusting system to maintain optimal operating conditions. The machine shows minor signs of use, such as some discoloration and marks on the cutting bed and slight wear on the cutting head and guide rail, but overall appears clean and well maintained. This model is suitable for precision cutting of metal sheets within its specified size and thickness limits.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 378 |
| Last activity | March 9, 2026 |
Prima Power Platino 1530
Řezačka - laserový řezací stroj Prima Power Platino 1530
Prima Power Platino 1530
Prima Power Platino 1530 Laserschneidmaschine
Prima Power Platino 1530
Prima Power Platino 1530 laser cutting machine
Máquina de corte por láser Prima Power Platino 1530
Machine de découpe laser Prima Power Platino 1530
Prima Power Platino 1530
Prima Power Platino 1530
Impianto taglio laser Prima Power Platino 1530
Prima Power Platino 1530
Prima Power Platino 1530
Wycinarka laserowa Prima Power Platino 1530
Prima Power Platino 1530
Prima Power Platino 1530
Prima Power Platino 1530 Станок для лазерной резки
Prima Power Platino 1530
Prima Power Platino 1530
Lazer kesim makinesi Prima Power Platino 1530
EN
- Languages
English (GB)