Contact us to receive an offer.
| Manufacturer | PRESSIX |
|---|---|
| Model | T160 CNR6 |
| Year | 2000 |
| Location | Italy
|
| Category | Forging - Mechanical presses |
| Power in tons | 160 T |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 55 |
| Weight | 13800 kg |
| worked hours | |
| hours under power | |
| state | revised |
| At local norms | yes |
| status | visible |
| Last availability date | 22/05/2026 |
| Product id | P250404079 |
| Language |
Механична преса PRESSIX T160 CNR6
Mechanický lis PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mekanisk presse
PRESSIX T160 CNR6 Mechanische Presse
Μηχανική πρέσα PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mechanical press
Prensa mecánica PRESSIX T160 CNR6
Presse mécanique PRESSIX T160 CNR6
Mehanička preša PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mechanikus prés
Pressa meccanica PRESSIX T160 CNR6
Mechaninis presas PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mechanische pers
Prasa mechaniczna PRESSIX T160 CNR6
Prensa mecânica PRESSIX T160 CNR6
Presă mecanică PRESSIX T160 CNR6
PRESSIX T160 CNR6 Механические прессы
Mehanička presa PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mekanisk press
Mekanik presler PRESSIX T160 CNR6
|
This listing is for a PRESSIX mechanical press, model T160 CNR6, manufactured in 2000. It has a rated force of 160 tons (1600 kN) and weighs approximately 13,800 kg. The press offers a ram stroke of up to 200 mm and operates at a nominal speed of 55 strokes per minute, with a minimum and maximum stroke range of 10 to 200 mm. The machine can perform up to 17 insertions per minute and features a sledgehammer adjustment of 110 mm.
The worktable measures 78 mm in height, 750 mm in depth, and 1250 mm in length, supporting molds up to 600 by 850 mm in size and mold heads weighing up to 344 daN. The press is equipped with safety guards featuring safety keys, clutch blades and pins, flywheel bearings and guards, as well as a stroke shift nosepiece and balance cylinder gasket kits. It operates with an air pressure between 5.5 and 6 bar and includes an inverter for variable speed drive control.
The electrical system runs on 380 V at 50 Hz, with an auxiliary voltage of 24 V. The machine also has a stopping position at the point of maximum stroke (P.M.S) and a safety distance of 355 mm.
Visible components include transparent safety doors, a control panel, yellow foot pedal for operation control, hydraulic or pneumatic cylinders on top, mechanical guiding rails, and wiring. The machine also features ventilation panels, an overhead crane beam marked for 10 tons, and a hydraulic unit with hoses, pressure gauge, and reservoir tank mounted on its lower side. The electrical control panel is organized and contains wiring, relays, and an inverter labeled 'invt.' The machine appears clean, well-maintained, and free of visible damage or wear.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
TECHNICAL FEATURES:
Press Model: T160 CNR6
Year of construction: 2000
Rated force: kN 1600
Mass: kg. 13.800
No. of strokes nominal: 55 C/min.
No. of hits min./max: 10/55 C/min.
No. of insertions max: 17 C/min.
Min./max clutch pressure: BAR 4.0÷5.5
Maximum stopping time: 0.22 s
Safety distance: 355 mm.
Energy (i=15% nom. strokes): 14,500 KJ
Min./max. stroke: 10/200 mm
Sledgehammer adjustment: 110 mm.
PMI high adjustment: 430 mm
Maximum extraction stroke: 60 mm
Worktable size (H, D, L): 78/750/1250 mm
Mace size (D, L): 600/850
Shank diameter: 60 mm
Overhang from the center: 370 mm
Max. mold size: 600/850 mm
Max. mold head weight: 344 daN
Operating air pressure: BAR 5.5÷6
Stopping position: P.M.S
Voltage: V 380
Frequency :50Hz
Auxiliary voltage: V 24
INSTALLED NEW COMPONENTS:
- Safety guards with safety keys;
- Clutch blades;
- Clutch pins and brite;
- Flywheel bearings;
- Flywheel guards;
- Stroke shift nosepiece;
- Balance cylinder gasket kits;
- Air pressure gauges;
- Electrical panel;
- Inverter (variable speed drive);
- Motor;
- Motor pulley;
- Work surface brightened on CNC machine
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this PRESSIX T160 CNR6 manufactured?
This PRESSIX T160 CNR6 mechanical press was manufactured in the year 2000.
Can this PRESSIX T160 CNR6 be tested before purchase?
This PRESSIX T160 CNR6 mechanical press includes the possibility of testing before purchase.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 10 |
| Last activity | Oct. 30, 2026 |
TECHNICAL FEATURES:
Press Model: T160 CNR6
Year of construction: 2000
Rated force: kN 1600
Mass: kg. 13.800
No. of strokes nominal: 55 C/min.
No. of hits min./max: 10/55 C/min.
No. of insertions max: 17 C/min.
Min./max clutch pressure: BAR 4.0÷5.5
Maximum stopping time: 0.22 s
Safety distance: 355 mm.
Energy (i=15% nom. strokes): 14,500 KJ
Min./max. stroke: 10/200 mm
Sledgehammer adjustment: 110 mm.
PMI high adjustment: 430 mm
Maximum extraction stroke: 60 mm
Worktable size (H, D, L): 78/750/1250 mm
Mace size (D, L): 600/850
Shank diameter: 60 mm
Overhang from the center: 370 mm
Max. mold size: 600/850 mm
Max. mold head weight: 344 daN
Operating air pressure: BAR 5.5÷6
Stopping position: P.M.S
Voltage: V 380
Frequency :50Hz
Auxiliary voltage: V 24
INSTALLED NEW COMPONENTS:
- Safety guards with safety keys;
- Clutch blades;
- Clutch pins and brite;
- Flywheel bearings;
- Flywheel guards;
- Stroke shift nosepiece;
- Balance cylinder gasket kits;
- Air pressure gauges;
- Electrical panel;
- Inverter (variable speed drive);
- Motor;
- Motor pulley;
- Work surface brightened on CNC machine
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this PRESSIX T160 CNR6 manufactured?
This PRESSIX T160 CNR6 mechanical press was manufactured in the year 2000.
Can this PRESSIX T160 CNR6 be tested before purchase?
This PRESSIX T160 CNR6 mechanical press includes the possibility of testing before purchase.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Forging - Mechanical presses |
| Power in tons | 160 T |
| Ram stroke | 200 mm |
| Nbr of strokes/min | 55 |
| Weight | 13800 kg |
| worked hours | |
| hours under power | |
| state | revised |
| At local norms | yes |
| status | visible |
| Last availability date | 22/05/2026 |
| Product id | P250404079 |
| Language |
Механична преса PRESSIX T160 CNR6
Mechanický lis PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mekanisk presse
PRESSIX T160 CNR6 Mechanische Presse
Μηχανική πρέσα PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mechanical press
Prensa mecánica PRESSIX T160 CNR6
Presse mécanique PRESSIX T160 CNR6
Mehanička preša PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mechanikus prés
Pressa meccanica PRESSIX T160 CNR6
Mechaninis presas PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mechanische pers
Prasa mechaniczna PRESSIX T160 CNR6
Prensa mecânica PRESSIX T160 CNR6
Presă mecanică PRESSIX T160 CNR6
PRESSIX T160 CNR6 Механические прессы
Mehanička presa PRESSIX T160 CNR6
PRESSIX T160 CNR6 Mekanisk press
Mekanik presler PRESSIX T160 CNR6
|
This listing is for a PRESSIX mechanical press, model T160 CNR6, manufactured in 2000. It has a rated force of 160 tons (1600 kN) and weighs approximately 13,800 kg. The press offers a ram stroke of up to 200 mm and operates at a nominal speed of 55 strokes per minute, with a minimum and maximum stroke range of 10 to 200 mm. The machine can perform up to 17 insertions per minute and features a sledgehammer adjustment of 110 mm.
The worktable measures 78 mm in height, 750 mm in depth, and 1250 mm in length, supporting molds up to 600 by 850 mm in size and mold heads weighing up to 344 daN. The press is equipped with safety guards featuring safety keys, clutch blades and pins, flywheel bearings and guards, as well as a stroke shift nosepiece and balance cylinder gasket kits. It operates with an air pressure between 5.5 and 6 bar and includes an inverter for variable speed drive control.
The electrical system runs on 380 V at 50 Hz, with an auxiliary voltage of 24 V. The machine also has a stopping position at the point of maximum stroke (P.M.S) and a safety distance of 355 mm.
Visible components include transparent safety doors, a control panel, yellow foot pedal for operation control, hydraulic or pneumatic cylinders on top, mechanical guiding rails, and wiring. The machine also features ventilation panels, an overhead crane beam marked for 10 tons, and a hydraulic unit with hoses, pressure gauge, and reservoir tank mounted on its lower side. The electrical control panel is organized and contains wiring, relays, and an inverter labeled 'invt.' The machine appears clean, well-maintained, and free of visible damage or wear.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 10 |
| Last activity | Oct. 30, 2026 |
EN
- Languages
English (GB)