Contact us to receive an offer.
| Manufacturer | Pinnacle |
|---|---|
| Model | L 210C |
| Year | 2005 |
| Location | Czech Republic
|
This listing is for a Pinnacle L 210C CNC lathe, manufactured in 2005. The machine has a compact footprint with dimensions of 2700 mm in length, 1600 mm in width, and 1800 mm in height, and it weighs approximately 4200 kg. It is designed for turning operations with a maximum turning diameter of 520 mm over the bed and 360 mm over the cross slide. The maximum turning length and distance between centers are both 610 mm. The spindle bore diameter is 88 mm, allowing for bar capacity up to 77 mm.
The lathe is equipped with a 15 kW spindle motor capable of speeds up to 3500 rpm, providing a wide range of turning speeds. The spindle nose is of type A2-8, and the chuck diameter is 10 inches. The machine features a turret with 10 tool stations, supporting tool sizes of 25 mm square and boring tools up to 40 mm in diameter. The tailstock includes a Morse taper MT4, with a quill diameter of 85 mm and travel of 80 mm, and an overall tailstock travel of 470 mm.
Additional technical specifications include feed motor power of 2.5 kW for both X and Z axes, rapid traverse speeds of 20 m/min (X axis) and 24 m/min (Z axis), and cutting feed rates ranging from 0.016 to 5000 mm/min. The turret indexing time is 0.13 seconds.
The lathe requires a power supply of approximately 3 KVA and an air supply pressure of 6 kg/cm². Hydraulic and coolant pump motors are included, rated at 1.5 kW and 0.53 kW respectively, along with a lubrication pump motor of 75 W.
The machine has been mainly used for machining shafts and flanges made from iron, aluminum, and occasionally stainless steel, typically in single-shift operation with regular servicing. It shows signs of use, including some dirt and wear marks. The lathe is fitted with a control panel featuring a screen, buttons, knobs, and an emergency stop button. The chuck is mounted on the spindle inside the machine enclosure. Inspection of the machine in running condition can be arranged upon agreement.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is in good technical condition, after agreement possibility of inspection in running. The machine was mainly used to produce classic shafts, flanges made of iron, aluminum, sometimes stainless steel. The machine works in single-shift operation, regularly serviced.
Technical details:
L210C
Swing Over Bed (mm)
Ø520
Swing Over Cross Slide (mm)
Ø360
Distance Between Center (mm)
610
Max. Turning Dia. (mm)
Ø440
Stanard Turning Dia. (mm)
Ø290
Max. Turning Length (mm)
610
Spindle Motor (kw)
15 / 18.5
Spindle Speed (rpm)
35 - 3,500
Spindle Nose
A2-8
Chuck Dia. or Collet
10"
Dia. Hole Through Spindle (mm)
Ø88
Bar Capacity (mm)
Ø77
Spindle Bearing I.D. (mm)
Ø130
Height of Center to Ground (mm)
950
Tailstock Taper
MT4
Tailstock Quill Dia. x Travel (mm)
Ø85 x 80
Travel of Tailstock (mm)
470
Feed Motor X/Z (kw)
2.5 / 2.5
Travel X/Z (mm)
210 / 610
Rapid Speed X/Z (m/min)
20 / 24
Cutting Feed (mm/min)
0.016 ~ 5,000
Tool Stations Number on Turret
10
Turret Index Time (T-T) sec
0.13
Tool Size (mm)
□25
Boring Tool Dia. (mm)
Ø40
Hydraulic Pump Motor (kw)
1.5, 35
Coolant Pump Motor (kw)
0.53
Lubrication Pump Motor (w)
0.075
Power Requipment (KVA)
Ø3, 30
Air Requipment kg/cm2)
6
Floor Space LxWxH (M)
2.7 x 1.6 x 1.8
Machine Weight (kg)
4,200
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 481 |
| Last activity | Oct. 28, 2026 |
The machine is in good technical condition, after agreement possibility of inspection in running. The machine was mainly used to produce classic shafts, flanges made of iron, aluminum, sometimes stainless steel. The machine works in single-shift operation, regularly serviced.
Technical details:
L210C
Swing Over Bed (mm)
Ø520
Swing Over Cross Slide (mm)
Ø360
Distance Between Center (mm)
610
Max. Turning Dia. (mm)
Ø440
Stanard Turning Dia. (mm)
Ø290
Max. Turning Length (mm)
610
Spindle Motor (kw)
15 / 18.5
Spindle Speed (rpm)
35 - 3,500
Spindle Nose
A2-8
Chuck Dia. or Collet
10"
Dia. Hole Through Spindle (mm)
Ø88
Bar Capacity (mm)
Ø77
Spindle Bearing I.D. (mm)
Ø130
Height of Center to Ground (mm)
950
Tailstock Taper
MT4
Tailstock Quill Dia. x Travel (mm)
Ø85 x 80
Travel of Tailstock (mm)
470
Feed Motor X/Z (kw)
2.5 / 2.5
Travel X/Z (mm)
210 / 610
Rapid Speed X/Z (m/min)
20 / 24
Cutting Feed (mm/min)
0.016 ~ 5,000
Tool Stations Number on Turret
10
Turret Index Time (T-T) sec
0.13
Tool Size (mm)
□25
Boring Tool Dia. (mm)
Ø40
Hydraulic Pump Motor (kw)
1.5, 35
Coolant Pump Motor (kw)
0.53
Lubrication Pump Motor (w)
0.075
Power Requipment (KVA)
Ø3, 30
Air Requipment kg/cm2)
6
Floor Space LxWxH (M)
2.7 x 1.6 x 1.8
Machine Weight (kg)
4,200
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Pinnacle L 210C CNC lathe, manufactured in 2005. The machine has a compact footprint with dimensions of 2700 mm in length, 1600 mm in width, and 1800 mm in height, and it weighs approximately 4200 kg. It is designed for turning operations with a maximum turning diameter of 520 mm over the bed and 360 mm over the cross slide. The maximum turning length and distance between centers are both 610 mm. The spindle bore diameter is 88 mm, allowing for bar capacity up to 77 mm.
The lathe is equipped with a 15 kW spindle motor capable of speeds up to 3500 rpm, providing a wide range of turning speeds. The spindle nose is of type A2-8, and the chuck diameter is 10 inches. The machine features a turret with 10 tool stations, supporting tool sizes of 25 mm square and boring tools up to 40 mm in diameter. The tailstock includes a Morse taper MT4, with a quill diameter of 85 mm and travel of 80 mm, and an overall tailstock travel of 470 mm.
Additional technical specifications include feed motor power of 2.5 kW for both X and Z axes, rapid traverse speeds of 20 m/min (X axis) and 24 m/min (Z axis), and cutting feed rates ranging from 0.016 to 5000 mm/min. The turret indexing time is 0.13 seconds.
The lathe requires a power supply of approximately 3 KVA and an air supply pressure of 6 kg/cm². Hydraulic and coolant pump motors are included, rated at 1.5 kW and 0.53 kW respectively, along with a lubrication pump motor of 75 W.
The machine has been mainly used for machining shafts and flanges made from iron, aluminum, and occasionally stainless steel, typically in single-shift operation with regular servicing. It shows signs of use, including some dirt and wear marks. The lathe is fitted with a control panel featuring a screen, buttons, knobs, and an emergency stop button. The chuck is mounted on the spindle inside the machine enclosure. Inspection of the machine in running condition can be arranged upon agreement.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 481 |
| Last activity | Oct. 28, 2026 |
cnc струг Pinnacle L 210C
Soustruh cnc Pinnacle L 210C
Pinnacle L 210C cnc drejebænk
Pinnacle L 210C Drehmaschine CNC
cnc τόρνος Pinnacle L 210C
Pinnacle L 210C cnc lathe
Torno cnc Pinnacle L 210C
Tour cnc Pinnacle L 210C
cnc tokarski stroj Pinnacle L 210C
Pinnacle L 210C cnc eszterga
Tornio cnc Pinnacle L 210C
cnc tekinimo staklės Pinnacle L 210C
Pinnacle L 210C cnc-draaibank
Tokarka CNC Pinnacle L 210C
Torno CNC Pinnacle L 210C
strung cnc Pinnacle L 210C
Pinnacle L 210C Токарный станок с ЧПУ
cnc strug Pinnacle L 210C
Pinnacle L 210C cnc svarv
Cnc torna Pinnacle L 210C
EN
- Languages
English (GB)