DESCRIPTION:
Blister packs are commonly used as unit-dose packaging for pharmaceutical tablets, capsules or lozenges. Blister packs can provide barrier protection for shelf life requirements, and a degree of tamper resistance, they are created by means of a form-fill-seal process at the pharmaceutical company or designated contract packer. A form-fill-seal process means that the blister pack is created from rolls of flat sheet or film, filled with the pharmaceutical product and closed (sealed) on the same equipment. Partena S.p.A. has many years experience in the packaging of the blister, primarily in the pharmaceutical sector.

SECTORS OF USE:
Suitable for the use in food industries, specifically for the dairy farming.

MAIN FEATURES:
Designed and built in perfect harmony with the most demanding needs, provides users with a solution to all problems of packaging (maximum output, minimum packaging material waste, large range of packaging materials including also polypropylene, aluminum) environment (minimum noise, smoke extraction, simplified lubrication system), management (rational design of controls, maximum simplicity in the format changes, reduced scheduled maintenance, preparation design for connection with any tipe of machine).
Workstations: preheating, forming, loading, closing and cutting station. The machine is pneumatically operated, the working cycle is obtained by means of a programmer operated by two motors for the choice of the two speeds of the packaging machine. All the stations are remarkably easy to access and all the movements are fully visible so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. Current format: blister package which accommodates 10 ampoules type 1 ml, 2 ml and tubular injection ampoules.

Year of construction: 1990

TECHNICAL DATA
Length mm 3470
Width mm 500
Height mm 1400
Net weight Kg 1800
Water consumption l/h 350
Air consumption Nl/min 550
Frequency Hz 50
Voltage Volt 380
Potenza max. installata KVA 4,5

PRODUCTION CHARACTERISTICS
Cutting device quick shear
Closing screening type CM 120 P08
Contratura print stretching aluminum
Control product presence CF 45
loaders ampoules
Beats per min (format dependent) 50
Format PF 1067/1
Step up to 156 mm
Belt width max 225 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 3470.0 × 500.0 × 1400.0
Weight 1800 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2009
Offers online 1036
Last activity March 28, 2024

Description

DESCRIPTION:
Blister packs are commonly used as unit-dose packaging for pharmaceutical tablets, capsules or lozenges. Blister packs can provide barrier protection for shelf life requirements, and a degree of tamper resistance, they are created by means of a form-fill-seal process at the pharmaceutical company or designated contract packer. A form-fill-seal process means that the blister pack is created from rolls of flat sheet or film, filled with the pharmaceutical product and closed (sealed) on the same equipment. Partena S.p.A. has many years experience in the packaging of the blister, primarily in the pharmaceutical sector.

SECTORS OF USE:
Suitable for the use in food industries, specifically for the dairy farming.

MAIN FEATURES:
Designed and built in perfect harmony with the most demanding needs, provides users with a solution to all problems of packaging (maximum output, minimum packaging material waste, large range of packaging materials including also polypropylene, aluminum) environment (minimum noise, smoke extraction, simplified lubrication system), management (rational design of controls, maximum simplicity in the format changes, reduced scheduled maintenance, preparation design for connection with any tipe of machine).
Workstations: preheating, forming, loading, closing and cutting station. The machine is pneumatically operated, the working cycle is obtained by means of a programmer operated by two motors for the choice of the two speeds of the packaging machine. All the stations are remarkably easy to access and all the movements are fully visible so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. Current format: blister package which accommodates 10 ampoules type 1 ml, 2 ml and tubular injection ampoules.

Year of construction: 1990

TECHNICAL DATA
Length mm 3470
Width mm 500
Height mm 1400
Net weight Kg 1800
Water consumption l/h 350
Air consumption Nl/min 550
Frequency Hz 50
Voltage Volt 380
Potenza max. installata KVA 4,5

PRODUCTION CHARACTERISTICS
Cutting device quick shear
Closing screening type CM 120 P08
Contratura print stretching aluminum
Control product presence CF 45
loaders ampoules
Beats per min (format dependent) 50
Format PF 1067/1
Step up to 156 mm
Belt width max 225 mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 3470.0 × 500.0 × 1400.0
Weight 1800 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2009
Offers online 1036
Last activity March 28, 2024

Here is a selection of similar machines

PARTENA-CAM Mod. M 82/BF - AUTOMATIC BLISTERING MACHINE