Contact us to receive an offer.
| Manufacturer | OTC DAIHEN Corporation (Japonsko) |
|---|---|
| Model | FD-V8L (verze s prodlouženým ramenem) |
| Year | 2020 |
| Location | Czech Republic
|
The OTC Daihen FD-V8L is a 6-axis industrial welding robot featuring an extended arm design with a reach of 1,437 mm, suitable for automated MIG/MAG welding in serial and repetitive production environments. Manufactured in 2020 by OTC Daihen Corporation, a reputable Japanese company, this model offers a payload capacity of 8 kg at the wrist, making it capable of handling welding torches with cabling and sensors. The robot weighs approximately 140 kg and provides a repeatability of ±0.08 mm, ensuring precise welding tasks.
This unit is supplied as a complete functional set, including the FD11 control unit, the synergic pulse welding power source OTC Welbee P500L (WB-500L), wire feeder VB-500L, and a water-cooled torch RTW5000H. The package also contains a programming terminal and all necessary cabling and IO box, forming a ready-to-use robotic welding workstation that can be deployed into production after placement and calibration.
The robot is housed inside a metal enclosure featuring a control panel with an emergency stop button and multiple colored buttons, facilitating safe and efficient operation. Inside the enclosure, a metal table or fixture is present to hold workpieces during welding. The robotic arm is equipped with a welding torch or similar tool at its end. A handheld control pendant with a screen and multiple buttons, labeled with OTC and Daihen Corporation logos, is included for robot operation; the pendant screen shows some dust or smudges but remains intact.
OTC Daihen robots offer full synergic welding process control directly from the teach pendant, with predefined programs for various materials such as steel, stainless steel, aluminum, copper, Inconel, and titanium. The welding power source supports multiple processes including DC, DC pulse, low spatter, wave pulse, MAG, MIG, DC TIG, and DC stick, compatible with wire diameters from 0.8 to 1.6 mm.
This robot is ideal for manufacturers transitioning from manual to robotic welding, those involved in serial production of welded parts, and companies seeking a multiprocess power source supporting a variety of materials. The robot was previously used in a specific production project and is now long-term idle, not due to malfunction but due to changes in production needs. It is offered as a practically new robotic welding cell, providing a cost-effective solution with many reliable operating hours ahead.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
OTC Daihen FD-V8L is a 6-axis industrial welding robot with an extended arm design (reach of 1,437 mm), designed for automated MIG/MAG welding in serial and repetitive production. It dates from 2020 and has only 752.5 operating hours – a really low usage for an industrial robot of this age. In practice, this means a machine essentially in like-new condition, with most of its service life ahead.
We offer it as a complete functional set, not just the manipulator alone. Included is the FD11 control unit, synergic pulse welding power source OTC Welbee P500L (also marked WB-500L), wire feeder VB-500L, water-cooled torch RTW5000H, programming terminal, and all cabling and IO box. The set forms a ready base for a robotic welding workstation which can be deployed into production after placement and calibration.
Why OTC Daihen
OTC Daihen is a Japanese manufacturer ranked among the global leaders in welding robots and power sources. The combination of robot and power source from one manufacturer brings several measurable advantages in practice:
• Full synergic welding process control from the robot – currents, voltages and pulse profiles are tuned directly from the teach pendant
• Predefined programs for common combinations of materials, wires, and gases (G3Si1, CrNi, CuSi, AlMg, Inconel, Titanium…)
• DC Low Spatter and Wave Pulse functions, which measurably reduce spatter and improve bead quality
• Reliable communication between robot and power source without the need for compromise interfaces
Main technical parameters
• 6 controlled axes, anthropomorphic design
• Reach 1,437 mm – "L" variant with extended arm
• Payload 8 kg at the wrist (sufficient even for torch with cabling and sensors)
• Repeatability ± 0.08 mm – typical industrial accuracy
• Robot weight approx. 140 kg
• Welding power source Welbee P500L (WB-500L), max 500 A, multiprocess (DC, DC pulse, low spatter, wave pulse, MAG, MIG, DC TIG, DC stick)
• Wire diameters 0.8–1.6 mm, compatible materials steel, stainless, aluminum, copper, Inconel, titanium
Who is this robot ideal for
• engineering and metal production operations transitioning from manual to robotic welding
• manufacturers of parts from weldments in serial and repetitive production
• companies seeking a fast route to robotization without full investment in a new setup
• operations needing a multiprocess power source supporting aluminum, stainless and common structural steel
Condition and reason for sale
The robot was acquired for a specific project – the production of crossbeams. This project ended and the seller’s activity now focuses mainly on piece and small series production where deployment of a dedicated welding robot is not economically justified. The robot is therefore long-term idle – not due to malfunction, but simply because there is no adequate workload for it. A video from the last robot test is also available demonstrating functional condition.
What you are actually buying
You are buying a practically new robotic welding cell from 2020 at a fraction of the price of a new solution. The robot with 752 operation hours has hundreds of thousands of hours of reliable operation ahead. The setup is multiprocess, compatible with practically all common welding tasks in metal production, and is supplied as a complete unit including power source, feeder, torch and programming terminal.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Consultant / Intermediary |
| Active since | 2025 |
| Offers online | 13 |
| Last activity | Oct. 27, 2026 |
OTC Daihen FD-V8L is a 6-axis industrial welding robot with an extended arm design (reach of 1,437 mm), designed for automated MIG/MAG welding in serial and repetitive production. It dates from 2020 and has only 752.5 operating hours – a really low usage for an industrial robot of this age. In practice, this means a machine essentially in like-new condition, with most of its service life ahead.
We offer it as a complete functional set, not just the manipulator alone. Included is the FD11 control unit, synergic pulse welding power source OTC Welbee P500L (also marked WB-500L), wire feeder VB-500L, water-cooled torch RTW5000H, programming terminal, and all cabling and IO box. The set forms a ready base for a robotic welding workstation which can be deployed into production after placement and calibration.
Why OTC Daihen
OTC Daihen is a Japanese manufacturer ranked among the global leaders in welding robots and power sources. The combination of robot and power source from one manufacturer brings several measurable advantages in practice:
• Full synergic welding process control from the robot – currents, voltages and pulse profiles are tuned directly from the teach pendant
• Predefined programs for common combinations of materials, wires, and gases (G3Si1, CrNi, CuSi, AlMg, Inconel, Titanium…)
• DC Low Spatter and Wave Pulse functions, which measurably reduce spatter and improve bead quality
• Reliable communication between robot and power source without the need for compromise interfaces
Main technical parameters
• 6 controlled axes, anthropomorphic design
• Reach 1,437 mm – "L" variant with extended arm
• Payload 8 kg at the wrist (sufficient even for torch with cabling and sensors)
• Repeatability ± 0.08 mm – typical industrial accuracy
• Robot weight approx. 140 kg
• Welding power source Welbee P500L (WB-500L), max 500 A, multiprocess (DC, DC pulse, low spatter, wave pulse, MAG, MIG, DC TIG, DC stick)
• Wire diameters 0.8–1.6 mm, compatible materials steel, stainless, aluminum, copper, Inconel, titanium
Who is this robot ideal for
• engineering and metal production operations transitioning from manual to robotic welding
• manufacturers of parts from weldments in serial and repetitive production
• companies seeking a fast route to robotization without full investment in a new setup
• operations needing a multiprocess power source supporting aluminum, stainless and common structural steel
Condition and reason for sale
The robot was acquired for a specific project – the production of crossbeams. This project ended and the seller’s activity now focuses mainly on piece and small series production where deployment of a dedicated welding robot is not economically justified. The robot is therefore long-term idle – not due to malfunction, but simply because there is no adequate workload for it. A video from the last robot test is also available demonstrating functional condition.
What you are actually buying
You are buying a practically new robotic welding cell from 2020 at a fraction of the price of a new solution. The robot with 752 operation hours has hundreds of thousands of hours of reliable operation ahead. The setup is multiprocess, compatible with practically all common welding tasks in metal production, and is supplied as a complete unit including power source, feeder, torch and programming terminal.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The OTC Daihen FD-V8L is a 6-axis industrial welding robot featuring an extended arm design with a reach of 1,437 mm, suitable for automated MIG/MAG welding in serial and repetitive production environments. Manufactured in 2020 by OTC Daihen Corporation, a reputable Japanese company, this model offers a payload capacity of 8 kg at the wrist, making it capable of handling welding torches with cabling and sensors. The robot weighs approximately 140 kg and provides a repeatability of ±0.08 mm, ensuring precise welding tasks.
This unit is supplied as a complete functional set, including the FD11 control unit, the synergic pulse welding power source OTC Welbee P500L (WB-500L), wire feeder VB-500L, and a water-cooled torch RTW5000H. The package also contains a programming terminal and all necessary cabling and IO box, forming a ready-to-use robotic welding workstation that can be deployed into production after placement and calibration.
The robot is housed inside a metal enclosure featuring a control panel with an emergency stop button and multiple colored buttons, facilitating safe and efficient operation. Inside the enclosure, a metal table or fixture is present to hold workpieces during welding. The robotic arm is equipped with a welding torch or similar tool at its end. A handheld control pendant with a screen and multiple buttons, labeled with OTC and Daihen Corporation logos, is included for robot operation; the pendant screen shows some dust or smudges but remains intact.
OTC Daihen robots offer full synergic welding process control directly from the teach pendant, with predefined programs for various materials such as steel, stainless steel, aluminum, copper, Inconel, and titanium. The welding power source supports multiple processes including DC, DC pulse, low spatter, wave pulse, MAG, MIG, DC TIG, and DC stick, compatible with wire diameters from 0.8 to 1.6 mm.
This robot is ideal for manufacturers transitioning from manual to robotic welding, those involved in serial production of welded parts, and companies seeking a multiprocess power source supporting a variety of materials. The robot was previously used in a specific production project and is now long-term idle, not due to malfunction but due to changes in production needs. It is offered as a practically new robotic welding cell, providing a cost-effective solution with many reliable operating hours ahead.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2025 |
| Offers online | 13 |
| Last activity | Oct. 27, 2026 |
Индустриален робот OTC DAIHEN Corporation (Япония) FD-V8L (версия с удължена ръка)
Industrialní robot OTC DAIHEN Corporation (Japonsko) FD-V8L (verze s prodlouženým ramenem)
Industrirobot OTC DAIHEN Corporation (Japan) FD-V8L (version med forlænget arm)
Industrieroboter OTC DAIHEN Corporation (Japan) FD-V8L (Version mit verlängertem Arm)
Βιομηχανικός ρομπότ OTC DAIHEN Corporation (Ιαπωνία) FD-V8L (έκδοση με επιμηκυμένο βραχίονα)
Industrial robot OTC DAIHEN Corporation (Japan) FD-V8L (version with extended arm)
Robot industrial OTC DAIHEN Corporation (Japón) FD-V8L (versión con brazo extendido)
Robot industriel OTC DAIHEN Corporation (Japon) FD-V8L (version avec bras allongé)
Industrijski robot OTC DAIHEN Corporation (Japan) FD-V8L (verzija s produženom rukom)
Ipari robot OTC DAIHEN Corporation (Japán) FD-V8L (meghosszabbított karos verzió)
Robot industriale OTC DAIHEN Corporation (Giappone) FD-V8L (versione con braccio allungato)
Pramoninis robotas OTC DAIHEN Corporation (Japonija) FD-V8L (versija su prailginta ranka)
Industriële robot OTC DAIHEN Corporation (Japan) FD-V8L (versie met verlengde arm)
Robot przemysłowy OTC DAIHEN Corporation (Japonia) FD-V8L (wersja z wydłużonym ramieniem)
Robô industrial OTC DAIHEN Corporation (Japão) FD-V8L (versão com braço estendido)
Robot industrial OTC DAIHEN Corporation (Japonia) FD-V8L (versiune cu braț prelungit)
Промышленный робот OTC DAIHEN Corporation (Япония) FD-V8L (версия с удлинённой рукой)
Индустријски робот OTC DAIHEN Corporation (Јапан) FD-V8L (верзија са продуженом руком)
Industriorobot OTC DAIHEN Corporation (Japan) FD-V8L (version med förlängt arm)
Endüstriyel robot OTC DAIHEN Corporation (Japonya) FD-V8L (uzatılmış kol versiyonu)
EN
- Languages
English (GB)