Oska OKRR 400 Wood chipping machine

Verified seller

22,000 €

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer Oska
Model OKRR 400
Year 2010
Location Poland PL
Ilya
Your dedicated contact
Ilya Z.

Automatic description (AI-Generated)

The Oska OKRR 400 is a wood chipping machine manufactured in 2010, designed for efficient wood processing tasks. It features a robust main engine with a power output of 37 kW, supported by two feed motors each rated at 1.5 kW, and an additional 3 kW motor dedicated to the feed table. The machine's rotor measures 400 mm in diameter and 430 mm in length, contributing to its effective wood chipping capabilities.

This model includes a vibrating feed table with dimensions of 4500 mm in length and 430 mm in width, facilitating consistent material feeding. The inlet dimensions are 400 mm in width and 120 mm in height, suitable for handling various sizes of wood material. The machine is equipped with knives featuring a sieve size of 50 mm by 50 mm, allowing for controlled chip size output.

The feed system incorporates one upper and one lower feed pulling shaft, and the feed rollers are protected by a hydraulic cover to enhance operational safety. The overall dimensions of the machine are 6500 mm in length, 2000 mm in width, and 1900 mm in height, with an approximate weight of 2500 kg.

Visually, the machine is painted blue with yellow covers on key components, including a large yellow perforated safety cover over the belt or chain drive system. It is equipped with multiple electric motors mounted on the left side and at the far end of the conveyor system, which extends to the right side of the machine. A control panel featuring multiple buttons and an emergency stop is positioned on a stand to the left, with an additional control box located near the machine on the ground.

The wood chipper appears clean and well-maintained, with freshly painted surfaces and no visible damage or rust, indicating careful upkeep. The machine is situated outdoors on paved ground. This Oska OKRR 400 wood chipping machine is suitable for operations requiring a reliable and powerful wood processing solution.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Offer Title: Oska OKRR 400 Wood Chipping Machine

Manufacturer: Oska
Model: OKRR 400
Year of Production: 2010
Technical Condition: As-is, where-is

Technical Parameters:
Inlet Width: 400 mm
Inlet Height: 120 mm
Main Engine Power: 37 kW
Feed Motor Power: 2 x 1.5 kW
Knives Sieve Size: 50 mm x 50 mm
Vibrating Feed Table Dimensions: 4500 mm (length) / 430 mm (width)
Feed Table Engine Power: 3 kW
Feed Pulling Shaft: One upper and lower
Hydraulic Cover of Feed Rollers: Yes
Rotor Diameter: 400 mm
Rotor Length: 430 mm
Dimensions (Length/Width/Height): 650 cm x 200 cm x 190 cm
Weight: Approximately 2500 kg

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Machinery dealer
Active since 2015
Offers online 123
Last activity Nov. 21, 2026

Seller's description

Offer Title: Oska OKRR 400 Wood Chipping Machine

Manufacturer: Oska
Model: OKRR 400
Year of Production: 2010
Technical Condition: As-is, where-is

Technical Parameters:
Inlet Width: 400 mm
Inlet Height: 120 mm
Main Engine Power: 37 kW
Feed Motor Power: 2 x 1.5 kW
Knives Sieve Size: 50 mm x 50 mm
Vibrating Feed Table Dimensions: 4500 mm (length) / 430 mm (width)
Feed Table Engine Power: 3 kW
Feed Pulling Shaft: One upper and lower
Hydraulic Cover of Feed Rollers: Yes
Rotor Diameter: 400 mm
Rotor Length: 430 mm
Dimensions (Length/Width/Height): 650 cm x 200 cm x 190 cm
Weight: Approximately 2500 kg

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.



Automatic description (AI-Generated)

The Oska OKRR 400 is a wood chipping machine manufactured in 2010, designed for efficient wood processing tasks. It features a robust main engine with a power output of 37 kW, supported by two feed motors each rated at 1.5 kW, and an additional 3 kW motor dedicated to the feed table. The machine's rotor measures 400 mm in diameter and 430 mm in length, contributing to its effective wood chipping capabilities.

This model includes a vibrating feed table with dimensions of 4500 mm in length and 430 mm in width, facilitating consistent material feeding. The inlet dimensions are 400 mm in width and 120 mm in height, suitable for handling various sizes of wood material. The machine is equipped with knives featuring a sieve size of 50 mm by 50 mm, allowing for controlled chip size output.

The feed system incorporates one upper and one lower feed pulling shaft, and the feed rollers are protected by a hydraulic cover to enhance operational safety. The overall dimensions of the machine are 6500 mm in length, 2000 mm in width, and 1900 mm in height, with an approximate weight of 2500 kg.

Visually, the machine is painted blue with yellow covers on key components, including a large yellow perforated safety cover over the belt or chain drive system. It is equipped with multiple electric motors mounted on the left side and at the far end of the conveyor system, which extends to the right side of the machine. A control panel featuring multiple buttons and an emergency stop is positioned on a stand to the left, with an additional control box located near the machine on the ground.

The wood chipper appears clean and well-maintained, with freshly painted surfaces and no visible damage or rust, indicating careful upkeep. The machine is situated outdoors on paved ground. This Oska OKRR 400 wood chipping machine is suitable for operations requiring a reliable and powerful wood processing solution.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2015
Offers online 123
Last activity Nov. 21, 2026

Here is a selection of similar machines - Oska OKRR 400

Oska OKRR 400 Wood chipping machine