Full Automatic Form, Fill and Seal Packaging Machine
OPAK MAKİNE QZ 1000 MAXI
Packaging Product: Processed cheese + Bread Sticks Grissini
Bottom Foil Material: PS, PET + PE, PVC + PE (300 mm)
Top Foil Material: ALU+PE (280mm)
Filling: Automatic
Vacuum: 205 m3 DVP Italy (0.1 mBar)
Capacity: 8-10 cycle/min
Machine Dimensions: 8000x1400x2100 mm; Monoblock Chassis/ Independent Stations
Chassis Material: AISI 304 Stainless Steel
Mould Material: 7075 ve 5083 Aluminium
PLC: OMRON (full-color touchscreen panel) (JAPAN)
Pneumatic: FESTO (GERMANY)
Electric: Telemecanique™ Schneider Electric
Security: Emergency Stop button on Operator Panel and Chassis, Automatic stop switches for low air pressure.
Circuit voltage: 380 V, 3 phases, 50 Hz
Pressurized Air Requirement: 6 - 8 bar, Max 1600 L/min (Clean and dry)
Chilled Water Requirement: 10 - 16°C refined from minerals, Neutral pH, water hardness 0, fixing rate 300 l/hour (4800 Kcal/h), pipe diameter ½"
Weight: approx. 3000-3200 kg
Electrical Consumption: average 18 kW - 380 V.
Bottom Reel Diameter: 500 mm
Top Reel Diameter: 300 mm
Bottom Reel Core Diameter: 76 mm
Top Reel Core Diameter: 76 mm
Conveyor Length: 1000mm
Mould security covers: Circuit cut switch
Chassis security covers: AISI 304 Stainless Steel
Bottom Foil Feeding System: Motor drive feeding system
Pre-heating Station: Sandwich type heating plate group made by 7075 Aluminium. Sealer faces are teflon coated.
Forming Station: Pneumatically operated locking type Station.
Top Foil Feeding: System able to work with photocell printed or non-printed. Pneumatic Break and Press stretching.
Sealing Station: Stand-by vacuum system ready to use when needed. Running system with one button from operator panel without any mechanical change. Pneumatic operated locking type station top sealing mould is supported by air cushion. Whole sealer surfaces kisses each other perfectly. No vacuum leak.
Cutting Unit: Motor drive male-female contour cutting system.
Chain and chain pulling: Bottom foil advancement chain made in Italy. Servo drived advancement for sensitive movement.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Moulding length 267 mm
Moulding width 280 mm
Forming depth 22 mm
Total power requirement 18 kW
-------------------
Length x width x height 8000.0 × 1400.0 × 2100.0
Weight 3200 kg
Worked hours 1705 hours
Hours under power
State like new
At local norms ---------
Status under power
opack-qz-1000-maxi-p220628018_1.pdf Download
opack-qz-1000-maxi-p220628018_2.pdf Download
opack-qz-1000-maxi-p220628018_3.pdf Download
Client type User – large company
Active since 2022
Offers online 1
Last activity June 29, 2022

Description

Full Automatic Form, Fill and Seal Packaging Machine
OPAK MAKİNE QZ 1000 MAXI
Packaging Product: Processed cheese + Bread Sticks Grissini
Bottom Foil Material: PS, PET + PE, PVC + PE (300 mm)
Top Foil Material: ALU+PE (280mm)
Filling: Automatic
Vacuum: 205 m3 DVP Italy (0.1 mBar)
Capacity: 8-10 cycle/min
Machine Dimensions: 8000x1400x2100 mm; Monoblock Chassis/ Independent Stations
Chassis Material: AISI 304 Stainless Steel
Mould Material: 7075 ve 5083 Aluminium
PLC: OMRON (full-color touchscreen panel) (JAPAN)
Pneumatic: FESTO (GERMANY)
Electric: Telemecanique™ Schneider Electric
Security: Emergency Stop button on Operator Panel and Chassis, Automatic stop switches for low air pressure.
Circuit voltage: 380 V, 3 phases, 50 Hz
Pressurized Air Requirement: 6 - 8 bar, Max 1600 L/min (Clean and dry)
Chilled Water Requirement: 10 - 16°C refined from minerals, Neutral pH, water hardness 0, fixing rate 300 l/hour (4800 Kcal/h), pipe diameter ½"
Weight: approx. 3000-3200 kg
Electrical Consumption: average 18 kW - 380 V.
Bottom Reel Diameter: 500 mm
Top Reel Diameter: 300 mm
Bottom Reel Core Diameter: 76 mm
Top Reel Core Diameter: 76 mm
Conveyor Length: 1000mm
Mould security covers: Circuit cut switch
Chassis security covers: AISI 304 Stainless Steel
Bottom Foil Feeding System: Motor drive feeding system
Pre-heating Station: Sandwich type heating plate group made by 7075 Aluminium. Sealer faces are teflon coated.
Forming Station: Pneumatically operated locking type Station.
Top Foil Feeding: System able to work with photocell printed or non-printed. Pneumatic Break and Press stretching.
Sealing Station: Stand-by vacuum system ready to use when needed. Running system with one button from operator panel without any mechanical change. Pneumatic operated locking type station top sealing mould is supported by air cushion. Whole sealer surfaces kisses each other perfectly. No vacuum leak.
Cutting Unit: Motor drive male-female contour cutting system.
Chain and chain pulling: Bottom foil advancement chain made in Italy. Servo drived advancement for sensitive movement.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Moulding length 267 mm
Moulding width 280 mm
Forming depth 22 mm
Total power requirement 18 kW
-------------------
Length x width x height 8000.0 × 1400.0 × 2100.0
Weight 3200 kg
Worked hours 1705 hours
Hours under power
State like new
At local norms ---------
Status under power

About this seller

Client type User – large company
Active since 2022
Offers online 1
Last activity June 29, 2022

Here is a selection of similar machines

Process chees - grissini packing machine OPAK MAKİNE QZ 1000 MAXI (form fill seal)