| Manufacturer | OKUMA |
|---|---|
| Model | MU 400VII |
| Year | 2014 |
| Location | Czech Republic
|
Manufacturer: OKUMA
Model: MU 400VII (also referenced as MU-400V II)
Year of Manufacture: 2014
This OKUMA MU 400VII is a vertical five-axis machining center designed to support complex milling operations with high precision. It features a robust OSP-P300M control system, facilitating efficient and accurate machine control. The machine is equipped with 48 tool pockets, allowing for a wide range of tooling options and extended machining cycles without frequent tool changes.
Key functional features include tool breakage detection and automatic tool length measurement, enhancing machining reliability and reducing downtime. The machine is prepared for the automatic zero offset function, which includes software support, and also incorporates an anti-collision system tailored for 4 and 5-axis milling centers to protect both the machine and the workpiece.
Additional enhancements include an upgraded cooling pump rated at 0.8 kW, ensuring effective temperature control during operations. The machine also comes with an automatic zero offset function that includes workpiece measurement capabilities, improving setup efficiency.
A Renishaw OMP60 probe is integrated for tool edge control, supporting precise tool positioning. The Super NURBS type A software enhances five-axis machining capabilities, allowing for complex surface machining with smooth tool paths.
The machine includes a chip conveyor to facilitate automatic removal of machining debris, contributing to cleaner operation and reduced manual cleaning.
From external inspection, the machine appears clean and well-maintained with no visible damage or dents on the exterior surfaces. The control panel is mounted on the right side and features various buttons and a display screen for operational control. A tool storage rack is also visible adjacent to the control panel. Additionally, an exhaust or ventilation duct is connected at the back of the machine, likely aiding in chip and dust evacuation.
The nameplate confirms the manufacturer as Okuma Corporation, model MU-400V II, with a production date of May 2014. The metal nameplate is clearly printed and affixed to the machine.
Testing of the machine is possible after prior agreement. The machine is offered in good technical condition and is sold as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: OKUMA MU 400VII 5-axis Machining Center
Manufacturer: OKUMA
Model: MU 400VII
Year of Manufacture: 2014
Technical Condition: Good technical condition, as-is, where-is
State: Visible
Number of Tool Pockets: 48
Key Features:
- Vertical five-axis machining center
- OSP-P300M control system
- Tool breakage detection
- Automatic tool length measurement
- Preparation for automatic zero offset function (includes software)
- Anti-collision system for 4/5-axis milling centers
- Enhanced cooling pump (0.8kW)
- Automatic zero offset function including workpiece measurement
- Renishaw OMP60 probe for tool edge control
- Super NURBS type A for five-axis machining
- Chip conveyor included
Testing: Possible after prior agreement.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many spindle hours does this equipment have?
This equipment has 25,000 spindle hours.
What maintenance level does the machine have?
This equipment has standard maintenance.
What model is this 5-axis machining center?
This MU 400VII 5-axis machining center.
What type of machine is this OKUMA MU 400VII?
This OKUMA MU 400VII is a 5-axis machining center.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 65 |
| Last activity | Nov. 2, 2026 |
Offer Title: OKUMA MU 400VII 5-axis Machining Center
Manufacturer: OKUMA
Model: MU 400VII
Year of Manufacture: 2014
Technical Condition: Good technical condition, as-is, where-is
State: Visible
Number of Tool Pockets: 48
Key Features:
- Vertical five-axis machining center
- OSP-P300M control system
- Tool breakage detection
- Automatic tool length measurement
- Preparation for automatic zero offset function (includes software)
- Anti-collision system for 4/5-axis milling centers
- Enhanced cooling pump (0.8kW)
- Automatic zero offset function including workpiece measurement
- Renishaw OMP60 probe for tool edge control
- Super NURBS type A for five-axis machining
- Chip conveyor included
Testing: Possible after prior agreement.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
How many spindle hours does this equipment have?
This equipment has 25,000 spindle hours.
What maintenance level does the machine have?
This equipment has standard maintenance.
What model is this 5-axis machining center?
This MU 400VII 5-axis machining center.
What type of machine is this OKUMA MU 400VII?
This OKUMA MU 400VII is a 5-axis machining center.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: OKUMA
Model: MU 400VII (also referenced as MU-400V II)
Year of Manufacture: 2014
This OKUMA MU 400VII is a vertical five-axis machining center designed to support complex milling operations with high precision. It features a robust OSP-P300M control system, facilitating efficient and accurate machine control. The machine is equipped with 48 tool pockets, allowing for a wide range of tooling options and extended machining cycles without frequent tool changes.
Key functional features include tool breakage detection and automatic tool length measurement, enhancing machining reliability and reducing downtime. The machine is prepared for the automatic zero offset function, which includes software support, and also incorporates an anti-collision system tailored for 4 and 5-axis milling centers to protect both the machine and the workpiece.
Additional enhancements include an upgraded cooling pump rated at 0.8 kW, ensuring effective temperature control during operations. The machine also comes with an automatic zero offset function that includes workpiece measurement capabilities, improving setup efficiency.
A Renishaw OMP60 probe is integrated for tool edge control, supporting precise tool positioning. The Super NURBS type A software enhances five-axis machining capabilities, allowing for complex surface machining with smooth tool paths.
The machine includes a chip conveyor to facilitate automatic removal of machining debris, contributing to cleaner operation and reduced manual cleaning.
From external inspection, the machine appears clean and well-maintained with no visible damage or dents on the exterior surfaces. The control panel is mounted on the right side and features various buttons and a display screen for operational control. A tool storage rack is also visible adjacent to the control panel. Additionally, an exhaust or ventilation duct is connected at the back of the machine, likely aiding in chip and dust evacuation.
The nameplate confirms the manufacturer as Okuma Corporation, model MU-400V II, with a production date of May 2014. The metal nameplate is clearly printed and affixed to the machine.
Testing of the machine is possible after prior agreement. The machine is offered in good technical condition and is sold as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 65 |
| Last activity | Nov. 2, 2026 |
5-осен обработващ център OKUMA MU 400VII
5osé obráběcí centrum OKUMA MU 400VII
OKUMA MU 400VII 5-akset bearbejdningscenter
OKUMA MU 400VII 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων OKUMA MU 400VII
OKUMA MU 400VII 5-axis machining center
Centro de mecanizado de 5 ejes OKUMA MU 400VII
Centre d'usinage 5 axes OKUMA MU 400VII
5-osni obradni centar OKUMA MU 400VII
OKUMA MU 400VII 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi OKUMA MU 400VII
5 ašių apdirbimo centras OKUMA MU 400VII
OKUMA MU 400VII 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe OKUMA MU 400VII
Centro de maquinação de 5 eixos OKUMA MU 400VII
Centru de prelucrare cu 5 axe OKUMA MU 400VII
OKUMA MU 400VII 5-осевой обрабатывающий центр
5-osni obradni centar OKUMA MU 400VII
OKUMA MU 400VII 5-axligt bearbetningscenter
5 eksenli işleme merkezi OKUMA MU 400VII
EN
- Languages
English (GB)