| Manufacturer | Okuma |
|---|---|
| Model | MB 5000H |
| Year | 2010 |
| Location | Italy
|
This Okuma MB 5000H is a horizontal machining centre manufactured in 2010 by Okuma Corporation in Japan. It features a robust 500 × 500 mm pallet capable of supporting a maximum part weight of 500 kg, making it suitable for a variety of machining applications. The machine offers substantial travel of 760 mm along the X, Y, and Z axes, accommodating complex and precise machining tasks. It is equipped with a high-speed spindle capable of reaching up to 15,000 rpm, allowing for efficient material removal and finishing.
The MB 5000H includes a 64-tool magazine, facilitating extended machining operations with a wide range of tooling options. The tool holders are of type BT40 with a tool taper SK40. The machine's control panel is mounted on a swivel arm and features a screen displaying coordinates and operational data for the X, Y, Z, and B axes, providing comprehensive control and monitoring capabilities.
The machine's exterior shows some signs of wear and dirt marks near the bottom, while the interior machining area exhibits typical signs of use such as metal shavings and worn paint, indicating it has been actively used. The front doors are equipped with two vertical windows to allow viewing inside the machining area. Safety stickers are present, indicating requirements for eye and hand protection.
The rear of the machine includes a conveyor or chip removal system to manage machining debris efficiently. Electrical specifications include a supply voltage of 380 V, three-phase power, 50 Hz frequency, and a rated capacity of 44.5 kVA. The machine weighs approximately 11,500 kg and stands 2,864 mm tall.
Overall, the Okuma MB 5000H is a substantial and versatile horizontal machining centre designed for demanding industrial machining tasks, featuring comprehensive axis travel, a high-speed spindle, and extensive tooling capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine.
Measurements height: 2864 mm
Machine weight: 11500 kg
Spindle speed range: 50–15,000
Tool taper: SK40
Number of axis: 4
X-Axis Movement: 760 mm
X-Axis Rapid Traverse: 60 m/min
Y-Axis Movement: 760 mm
Y-Axis Rapid Traverse: 60 m/min
Z-Axis Movement: 760 mm
Z-Axis Rapid Traverse: 60 m/min
Max weight: 10 kg
Max tool diameter: 70 mm / 150 mm
Max tool length: 300–450 mm
Type of tool holder: BT40
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine.
Measurements height: 2864 mm
Machine weight: 11500 kg
Spindle speed range: 50–15,000
Tool taper: SK40
Number of axis: 4
X-Axis Movement: 760 mm
X-Axis Rapid Traverse: 60 m/min
Y-Axis Movement: 760 mm
Y-Axis Rapid Traverse: 60 m/min
Z-Axis Movement: 760 mm
Z-Axis Rapid Traverse: 60 m/min
Max weight: 10 kg
Max tool diameter: 70 mm / 150 mm
Max tool length: 300–450 mm
Type of tool holder: BT40
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Okuma MB 5000H is a horizontal machining centre manufactured in 2010 by Okuma Corporation in Japan. It features a robust 500 × 500 mm pallet capable of supporting a maximum part weight of 500 kg, making it suitable for a variety of machining applications. The machine offers substantial travel of 760 mm along the X, Y, and Z axes, accommodating complex and precise machining tasks. It is equipped with a high-speed spindle capable of reaching up to 15,000 rpm, allowing for efficient material removal and finishing.
The MB 5000H includes a 64-tool magazine, facilitating extended machining operations with a wide range of tooling options. The tool holders are of type BT40 with a tool taper SK40. The machine's control panel is mounted on a swivel arm and features a screen displaying coordinates and operational data for the X, Y, Z, and B axes, providing comprehensive control and monitoring capabilities.
The machine's exterior shows some signs of wear and dirt marks near the bottom, while the interior machining area exhibits typical signs of use such as metal shavings and worn paint, indicating it has been actively used. The front doors are equipped with two vertical windows to allow viewing inside the machining area. Safety stickers are present, indicating requirements for eye and hand protection.
The rear of the machine includes a conveyor or chip removal system to manage machining debris efficiently. Electrical specifications include a supply voltage of 380 V, three-phase power, 50 Hz frequency, and a rated capacity of 44.5 kVA. The machine weighs approximately 11,500 kg and stands 2,864 mm tall.
Overall, the Okuma MB 5000H is a substantial and versatile horizontal machining centre designed for demanding industrial machining tasks, featuring comprehensive axis travel, a high-speed spindle, and extensive tooling capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Хоризонтален обработващ център Okuma MB 5000H
Horizontální obráběcí centrum Okuma MB 5000H
Okuma MB 5000H Vandret bearbejdningscenter
Okuma MB 5000H Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας Okuma MB 5000H
Okuma MB 5000H Horizontal machining center
Centro de mecanizado horizontal Okuma MB 5000H
Centre d'usinage horizontal Okuma MB 5000H
Horizontalni obradni centar Okuma MB 5000H
Okuma MB 5000H Vízszintes megmunkáló központ
Centro di lavoro orizzontale Okuma MB 5000H
Horizontalus apdirbimo centras Okuma MB 5000H
Okuma MB 5000H Horizontaal bewerkingscentrum
Centrum obróbcze poziome Okuma MB 5000H
Centro de maquinação horizontal Okuma MB 5000H
Centru de prelucrare orizontal Okuma MB 5000H
Okuma MB 5000H Горизонтальный обрабатывающий центр
Horizontalni obradni centar Okuma MB 5000H
Okuma MB 5000H Horisontellt bearbetningscenter
Yatay işleme merkezi Okuma MB 5000H
EN
- Languages
English (GB)