Contact us to receive an offer.
| Manufacturer | OKUMA |
|---|---|
| Model | MB-46VAE |
| Year | 2005 |
| Location | Switzerland
|
This listing is for an Okuma ACE CENTER MB-46VAE vertical machining center, manufactured in 2005. It features a machining area with strokes of 560 mm on the X-axis, 762 mm on the Y-axis, and 460 mm on the Z-axis, providing substantial working range for various machining tasks. The maximum feed rate is 32 meters per minute, allowing efficient material removal and machining speed.
The machine is equipped with a T-slotted table measuring 460 mm by 1000 mm, capable of supporting a maximum load of 700 kg. This robust table accommodates a variety of workpieces and is complemented by multiple clamps for secure workholding.
Spindle specifications include a speed range from 50 to 8,000 rpm with an HSK63 spindle cone, suitable for a wide range of machining operations. The machine includes a 48-position tool changer carousel, supporting tools up to 125 mm in diameter and 300 mm in length. The tool holders and carousel show some signs of wear and minor rust, which is typical for used equipment but should be considered when evaluating the machine.
The machine's overall dimensions are 2160 mm in length, 2700 mm in width, and 2750 mm in height, with a total weight of approximately 6,500 kg. It requires a power supply of 21 KVA and has a coolant capacity of 170 liters.
The control panel is an Okuma OSP-E100M model, featuring a screen, multiple buttons, switches, and an emergency stop button. The control panel appears clean and intact with no visible damage. The main machine body shows minor wear and some paint chipping near the base, consistent with typical industrial use. Electrical or hydraulic cabinets are located on the left side behind the machine, and hydraulic and pneumatic components, hoses, and wiring are visible at the base, all appearing intact with no visible leaks or damage.
Overall, this Okuma MB-46VAE vertical machining center offers a comprehensive set of features suitable for precision machining tasks, with visible signs of normal industrial wear but no evident major damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Strokes
x: 560 mm
y: 762 mm
z: 460 mm
maximum feed rate: 32 m/min
Table
Surface: 460x1000 mm
maximum load: 700 kg
Spindle
Speed: 50-8'000 rpm
Cone: HKS63
48-position tool loader
max tool dia: 125 mm
max tool length 300 mm
Dimensions
height 2750 mm
Floor space : 2160x2700 mm
Weight : 6'500 kg
Power requirement : 21 KVA
Coolant : 170 l
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 41 |
| Last activity | Oct. 31, 2026 |
Strokes
x: 560 mm
y: 762 mm
z: 460 mm
maximum feed rate: 32 m/min
Table
Surface: 460x1000 mm
maximum load: 700 kg
Spindle
Speed: 50-8'000 rpm
Cone: HKS63
48-position tool loader
max tool dia: 125 mm
max tool length 300 mm
Dimensions
height 2750 mm
Floor space : 2160x2700 mm
Weight : 6'500 kg
Power requirement : 21 KVA
Coolant : 170 l
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for an Okuma ACE CENTER MB-46VAE vertical machining center, manufactured in 2005. It features a machining area with strokes of 560 mm on the X-axis, 762 mm on the Y-axis, and 460 mm on the Z-axis, providing substantial working range for various machining tasks. The maximum feed rate is 32 meters per minute, allowing efficient material removal and machining speed.
The machine is equipped with a T-slotted table measuring 460 mm by 1000 mm, capable of supporting a maximum load of 700 kg. This robust table accommodates a variety of workpieces and is complemented by multiple clamps for secure workholding.
Spindle specifications include a speed range from 50 to 8,000 rpm with an HSK63 spindle cone, suitable for a wide range of machining operations. The machine includes a 48-position tool changer carousel, supporting tools up to 125 mm in diameter and 300 mm in length. The tool holders and carousel show some signs of wear and minor rust, which is typical for used equipment but should be considered when evaluating the machine.
The machine's overall dimensions are 2160 mm in length, 2700 mm in width, and 2750 mm in height, with a total weight of approximately 6,500 kg. It requires a power supply of 21 KVA and has a coolant capacity of 170 liters.
The control panel is an Okuma OSP-E100M model, featuring a screen, multiple buttons, switches, and an emergency stop button. The control panel appears clean and intact with no visible damage. The main machine body shows minor wear and some paint chipping near the base, consistent with typical industrial use. Electrical or hydraulic cabinets are located on the left side behind the machine, and hydraulic and pneumatic components, hoses, and wiring are visible at the base, all appearing intact with no visible leaks or damage.
Overall, this Okuma MB-46VAE vertical machining center offers a comprehensive set of features suitable for precision machining tasks, with visible signs of normal industrial wear but no evident major damage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 41 |
| Last activity | Oct. 31, 2026 |
Вертикален обработващ център OKUMA MB-46VAE
Vertikální obráběcí centrum OKUMA MB-46VAE
OKUMA MB-46VAE Lodret bearbejdningscenter
OKUMA MB-46VAE Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας OKUMA MB-46VAE
OKUMA MB-46VAE Vertical machining center
Centro de mecanizado vertical OKUMA MB-46VAE
Centre d'usinage vertical OKUMA MB-46VAE
Vertikalni obradni centar OKUMA MB-46VAE
OKUMA MB-46VAE Függőleges megmunkáló központ
Centro di lavoro verticale OKUMA MB-46VAE
Vertikalus apdirbimo centras OKUMA MB-46VAE
OKUMA MB-46VAE Verticaal bewerkingscentrum
Pionowe centrum obróbcze OKUMA MB-46VAE
Centro de usinagem vertical OKUMA MB-46VAE
Centru de prelucrare vertical OKUMA MB-46VAE
OKUMA MB-46VAE Вертикальный обрабатывающий центр
Vertikalni obradni centar OKUMA MB-46VAE
OKUMA MB-46VAE Vertikalt bearbetningscenter
Dikey işleme merkezi OKUMA MB-46VAE
EN
- Languages
English (GB)