Contact us to receive an offer.
| Manufacturer | nTact |
|---|---|
| Model | nRad1 |
| Year | 2020 |
| Location | Germany
|
| Category | Semiconductors - Wafer equipment |
| Length x width x height | 911.0 × 578.0 × 685.0 |
| Weight | 170 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | visible but unplugged |
| Last availability date | 06/11/2026 |
| Product id | P261106177 |
| Language |
Машина за вафли nTact nRad1
Waferovací stroj nTact nRad1
nTact nRad1 Wafer maskine
nTact nRad1 Waferanlage
Μηχανή γκοφρέτας nTact nRad1
nTact nRad1 Wafer machine
Máquina para wafer nTact nRad1
Machine pour wafer nTact nRad1
Stroj za oblatne nTact nRad1
nTact nRad1 Ostya gép
Macchina per wafer nTact nRad1
nTact nRad1 Vaflių mašina
nTact nRad1 Wafelmachine
Maszyna do produkcji płytek półprzewodnikowych nTact nRad1
Máquina de wafer nTact nRad1
Aparat pentru napolitane nTact nRad1
nTact nRad1 Пластина
Mašina za vafle nTact nRad1
nTact nRad1 Wafer maskin
Wafer Makinası nTact nRad1
|
nTact nRad1 R&D slot-die coater, manufactured in 2020. This compact laboratory system is designed for coating thin films, with a stated coating range of 20 nm to 100 µm. The system uses nTact slot-die technology and is described as suitable for producing homogeneous films. The listing reports that approximately 65 nm PEDOT:PSS films were achieved at commissioning.
The stated configuration includes a syringe pump for viscosities up to 80 cP, with 2.5 or 5 ml fill volume; two 316L stainless-steel slot dies with coating widths of 70 mm and 206 mm; and a porous ceramic vacuum chuck for substrates up to A4. The chuck has two vacuum zones and heating up to 50 °C. Also specified are a heated reservoir with stirrer up to 60 °C, a precision linear motor on air bearings, a Z servo axis with contact encoder for automatic coating-gap setting, and a 7-inch touchscreen with PC recipe software via Ethernet. Manufacturer documentation is included in the stated configuration.
Substrates are specified up to 210 × 297 mm, including glass, plastic, metal foil and wafers. The stated system dimensions are 911 × 578 × 685 mm and weight is 170 kg. Listed requirements are clean dry air at 6.9 bar, vacuum at -85 kPa and 120/240 V AC.
The machine is shown installed inside a large stainless-steel enclosure. A separate wheeled equipment cabinet, hoses, and a vessel and pump assembly are also shown; their inclusion with the coater is not specified. The listing describes the unit as used and little used. A GS M-Line glovebox is noted as optional.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
nTact nRad1 slot-die coater (R&D extrusion coater), purchased 2019, commissioned July 2020. .
Compact lab coater for homogeneous thin films from 20 nm to 100 µm, built on the same slot-die technology nTact uses in industrial systems up to display format 2,160 x 2,460 mm. About 65 nm PEDOT:PSS films were achieved at commissioning.
Configuration of this unit:
- Syringe pump for viscosities up to 80 cP (fill volume 2.5 or 5 ml)
- Two SST 316L slot dies: 70 mm and 206 mm coating width (low-volume, corrosion-resistant, incl. 5 shims)
- Porous ceramic vacuum chuck (Kyocera), up to A4, 2 vacuum zones, heated up to 50 °C
- Heated reservoir with stirrer up to 60 °C
- Precision linear motor on air bearings, Z servo axis with contact encoder for automatic coating-gap setting
- 7-inch touchscreen, PC recipe software via Ethernet
- Manufacturer documentation handed over with the system
System specification (nTact):
- Substrates up to 210 x 297 mm (A4): glass, plastic, metal foil, wafers – rigid 0.5–6 mm or flexible > 100 µm
- Uniformity ±3 % (> 150 nm), ±5 % (50–150 nm)
- System fill volume below 10 ml
- Approx. 911 x 578 x 685 mm, approx. 170 kg, UL/CE
- Facilities: clean dry air 6.9 bar, vacuum -85 kPa, 120/240 V AC
Previously operated inside a glovebox – GS M-Line glovebox optionally available on request.
Used, but little used and therefore in excellent condition. Fully functional – the system can be tested before purchase. Dealer sale by MOLOR (B2B). Service available via the former nTact service partner (DACH). Price on request.
All photos and details:
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Nov. 6, 2026 |
nTact nRad1 slot-die coater (R&D extrusion coater), purchased 2019, commissioned July 2020. .
Compact lab coater for homogeneous thin films from 20 nm to 100 µm, built on the same slot-die technology nTact uses in industrial systems up to display format 2,160 x 2,460 mm. About 65 nm PEDOT:PSS films were achieved at commissioning.
Configuration of this unit:
- Syringe pump for viscosities up to 80 cP (fill volume 2.5 or 5 ml)
- Two SST 316L slot dies: 70 mm and 206 mm coating width (low-volume, corrosion-resistant, incl. 5 shims)
- Porous ceramic vacuum chuck (Kyocera), up to A4, 2 vacuum zones, heated up to 50 °C
- Heated reservoir with stirrer up to 60 °C
- Precision linear motor on air bearings, Z servo axis with contact encoder for automatic coating-gap setting
- 7-inch touchscreen, PC recipe software via Ethernet
- Manufacturer documentation handed over with the system
System specification (nTact):
- Substrates up to 210 x 297 mm (A4): glass, plastic, metal foil, wafers – rigid 0.5–6 mm or flexible > 100 µm
- Uniformity ±3 % (> 150 nm), ±5 % (50–150 nm)
- System fill volume below 10 ml
- Approx. 911 x 578 x 685 mm, approx. 170 kg, UL/CE
- Facilities: clean dry air 6.9 bar, vacuum -85 kPa, 120/240 V AC
Previously operated inside a glovebox – GS M-Line glovebox optionally available on request.
Used, but little used and therefore in excellent condition. Fully functional – the system can be tested before purchase. Dealer sale by MOLOR (B2B). Service available via the former nTact service partner (DACH). Price on request.
All photos and details:
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Semiconductors - Wafer equipment |
| Length x width x height | 911.0 × 578.0 × 685.0 |
| Weight | 170 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | visible but unplugged |
| Last availability date | 06/11/2026 |
| Product id | P261106177 |
| Language |
Машина за вафли nTact nRad1
Waferovací stroj nTact nRad1
nTact nRad1 Wafer maskine
nTact nRad1 Waferanlage
Μηχανή γκοφρέτας nTact nRad1
nTact nRad1 Wafer machine
Máquina para wafer nTact nRad1
Machine pour wafer nTact nRad1
Stroj za oblatne nTact nRad1
nTact nRad1 Ostya gép
Macchina per wafer nTact nRad1
nTact nRad1 Vaflių mašina
nTact nRad1 Wafelmachine
Maszyna do produkcji płytek półprzewodnikowych nTact nRad1
Máquina de wafer nTact nRad1
Aparat pentru napolitane nTact nRad1
nTact nRad1 Пластина
Mašina za vafle nTact nRad1
nTact nRad1 Wafer maskin
Wafer Makinası nTact nRad1
|
nTact nRad1 R&D slot-die coater, manufactured in 2020. This compact laboratory system is designed for coating thin films, with a stated coating range of 20 nm to 100 µm. The system uses nTact slot-die technology and is described as suitable for producing homogeneous films. The listing reports that approximately 65 nm PEDOT:PSS films were achieved at commissioning.
The stated configuration includes a syringe pump for viscosities up to 80 cP, with 2.5 or 5 ml fill volume; two 316L stainless-steel slot dies with coating widths of 70 mm and 206 mm; and a porous ceramic vacuum chuck for substrates up to A4. The chuck has two vacuum zones and heating up to 50 °C. Also specified are a heated reservoir with stirrer up to 60 °C, a precision linear motor on air bearings, a Z servo axis with contact encoder for automatic coating-gap setting, and a 7-inch touchscreen with PC recipe software via Ethernet. Manufacturer documentation is included in the stated configuration.
Substrates are specified up to 210 × 297 mm, including glass, plastic, metal foil and wafers. The stated system dimensions are 911 × 578 × 685 mm and weight is 170 kg. Listed requirements are clean dry air at 6.9 bar, vacuum at -85 kPa and 120/240 V AC.
The machine is shown installed inside a large stainless-steel enclosure. A separate wheeled equipment cabinet, hoses, and a vessel and pump assembly are also shown; their inclusion with the coater is not specified. The listing describes the unit as used and little used. A GS M-Line glovebox is noted as optional.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Nov. 6, 2026 |
EN
- Languages
English (GB)