Contact us to receive an offer.
| Manufacturer | Nikka Densok Limited |
|---|---|
| Model | HDI |
| Year | |
| Location | Italy
|
The Nikka Densok Limited HDI series leak test control machine, model HDI, is designed for 100% inspection and non-destructive testing of plastic ampoules and monodose BFS (Blow-Fill-Seal) products. It supports verification of losses in these containers to ensure product integrity. The machine accommodates 1 to 4 inspection stations, allowing customizable inspection configurations based on production needs.
The HDI machine can handle single-dose strips with maximum dimensions of 110 mm in length and 150 mm in width. It features an automatic feeding system where single-dose strips are fed onto a conveyor belt in the correct time sequence by means of a servo motor, ensuring precise and efficient inspection. The machine operates at speeds of up to 110 cards per minute, with a capacity of approximately 6600 units per hour.
Electrical requirements for the machine include a power supply range of 200 to 480 VAC, 50/60 Hz, with 3-phase power consumption of 1 KVA. It is designed to operate within ambient temperature conditions of 10°C to 35°C and ambient humidity levels between 20% and 80%. Product conductivity specifications are 1.5 μS (400 KΩ sopra).
Constructed from stainless steel, the machine includes a transparent cover and a control panel located on the right side. The control panel features buttons, switches, a small display screen, and an emergency stop button to ensure operator safety and ease of use. The front lower panel displays two electrical hazard warning signs, emphasizing adherence to safety standards. The machine appears clean and well-maintained with no visible damage, underscoring its good condition.
This equipment is compliant with 21 CFR Part 11, supporting regulatory requirements for electronic records and signatures. Format changes are designed to be easy, facilitating quick adjustments to different product sizes and inspection parameters. Overall, the Nikka Densok HDI leak test control machine offers a reliable solution for high-speed, precise inspection in pharmaceutical or related production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
HDI series leak test control machine NIKKA DENSOK DMI Verification of losses in plastic ampoules and monodose BFS Features of the HDI machine 100% inspection by BFS production non-destructive testing test 1-4 inspection stations Speed up to 110 card/min Easy change of format measures Compliant with 21 CFR Part 11 automatic feeding system Single-dose strip automatically fed on the conveyor belt for inspection in the correct time sequence by means of servo motor
General information Inspection stations: 1 – 4 stations
Maximum measurements of the strip: L110mm/W150mm
Capacity: 6600/hour.
Energy consumption: 1KVA
Electric power supply: 200 ~ 480VAC, 50/60Hz, 3 phases
Environment: Ambient temperature: 10o ~ 35oC
Ambient humidity: 20 ~ 80%
Product Conductivity: 1.5μS (400 KΩ sopra)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 382 |
| Last activity | Nov. 3, 2026 |
HDI series leak test control machine NIKKA DENSOK DMI Verification of losses in plastic ampoules and monodose BFS Features of the HDI machine 100% inspection by BFS production non-destructive testing test 1-4 inspection stations Speed up to 110 card/min Easy change of format measures Compliant with 21 CFR Part 11 automatic feeding system Single-dose strip automatically fed on the conveyor belt for inspection in the correct time sequence by means of servo motor
General information Inspection stations: 1 – 4 stations
Maximum measurements of the strip: L110mm/W150mm
Capacity: 6600/hour.
Energy consumption: 1KVA
Electric power supply: 200 ~ 480VAC, 50/60Hz, 3 phases
Environment: Ambient temperature: 10o ~ 35oC
Ambient humidity: 20 ~ 80%
Product Conductivity: 1.5μS (400 KΩ sopra)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Nikka Densok Limited HDI series leak test control machine, model HDI, is designed for 100% inspection and non-destructive testing of plastic ampoules and monodose BFS (Blow-Fill-Seal) products. It supports verification of losses in these containers to ensure product integrity. The machine accommodates 1 to 4 inspection stations, allowing customizable inspection configurations based on production needs.
The HDI machine can handle single-dose strips with maximum dimensions of 110 mm in length and 150 mm in width. It features an automatic feeding system where single-dose strips are fed onto a conveyor belt in the correct time sequence by means of a servo motor, ensuring precise and efficient inspection. The machine operates at speeds of up to 110 cards per minute, with a capacity of approximately 6600 units per hour.
Electrical requirements for the machine include a power supply range of 200 to 480 VAC, 50/60 Hz, with 3-phase power consumption of 1 KVA. It is designed to operate within ambient temperature conditions of 10°C to 35°C and ambient humidity levels between 20% and 80%. Product conductivity specifications are 1.5 μS (400 KΩ sopra).
Constructed from stainless steel, the machine includes a transparent cover and a control panel located on the right side. The control panel features buttons, switches, a small display screen, and an emergency stop button to ensure operator safety and ease of use. The front lower panel displays two electrical hazard warning signs, emphasizing adherence to safety standards. The machine appears clean and well-maintained with no visible damage, underscoring its good condition.
This equipment is compliant with 21 CFR Part 11, supporting regulatory requirements for electronic records and signatures. Format changes are designed to be easy, facilitating quick adjustments to different product sizes and inspection parameters. Overall, the Nikka Densok HDI leak test control machine offers a reliable solution for high-speed, precise inspection in pharmaceutical or related production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 382 |
| Last activity | Nov. 3, 2026 |
Машина за проверка Nikka Densok Limited HDI
Kontrolní linka Nikka Densok Limited HDI
Inspektionsmaskine Nikka Densok Limited HDI
Nikka Densok Limited HDI Leuchtmaschine
Μηχάνημα επιθεώρησης Nikka Densok Limited HDI
Nikka Densok Limited HDI Inspection machine
Miradora Nikka Densok Limited HDI
Mireuse Nikka Densok Limited HDI
Stroj za pregled Nikka Densok Limited HDI
Nikka Densok Limited HDI Ellenőrző gép
Ispezionatrice Nikka Densok Limited HDI
Patikrinimo mašina Nikka Densok Limited HDI
Nikka Densok Limited HDI Inspectiemachine
Maszyna kontrolna Nikka Densok Limited HDI
Máquina de inspeção Nikka Densok Limited HDI
Masina de inspectie Nikka Densok Limited HDI
Nikka Densok Limited HDI Контрольно-сортировочный автомат
Mašina za pregled Nikka Densok Limited HDI
Nikka Densok Limited HDI Inspektionsmaskin
Denetim makinesi Nikka Densok Limited HDI
EN
- Languages
English (GB)