Contact us to receive an offer.
| Manufacturer | myjnia KLT |
|---|---|
| Model | washmachine myjnia pojemnikow KLT |
| Year | 2022 |
| Location | Poland
|
Automatic through-feed washer for KLT containers (boxes, inserts, lids). Designed for washing, rinsing, degreasing, and drying KLT boxes and trays. Dual-track design, capacity: up to 600 pieces/hour per lane. Maximum passage width: 300 mm; maximum passage height: 650 mm. Types of contamination: dust, mineral grease, mineral oil, metal shavings. The system has a modular design allowing expansion of the setup at a later time. Materials and construction: piping and modules made of stainless steel. Machine equipped with a dual-track chain conveyor. Hot water heating is achieved by a heat exchanger in the washing tanks; recommended supply temperature approx. 90°C. Spray pipes are twisted. Oil separator: three-phase separator with pneumatic membrane pump and pre-filter on all tanks. Dish counters installed on both tracks. The system consists of: inlet module, washing module 1, washing module 2, cold air blower, two hot air drying modules, outlet module, and transport system. Additionally: drive with stepless speed control of transport, tubular heat exchanger in washing tanks, control cabinet with electrical control system, mounting and cleaning doors on both sides of the system, thermal insulation of washing tanks, and acoustic insulation of fans. Overall dimensions: length 12,350 mm, width 1,950 mm (2-track), total height with fans 2,800 mm. Power (selected items): washing pumps 1: 7.50 kW; washing pumps 2: 7.50 kW; cold air blower: 5.50 kW; drive X: 0.55 kW; exhaust fan: 3.00 kW. Hot air blower: 2x (as specified), hot air heating coil: 4x. Power supply: 400 V, 50 Hz. Protection rating: IP55. The system control unit is located beside the machine; control cabinet contains installations necessary for system operation and monitoring, wiring compliant with VDE regulations. Power cable to the control cabinet should be at least 2 m long. Emergency stops are installed in the loading/unloading area. Heating of the washing basins requires hot water supply at approximately 90°C.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Crates, KLT inserts and lids - through-feed washing system.
washmachine KLT, crate washer
Automatyczna myjka do pojemnikow KLT, pralka tac
- mycie
- plukanie
- odolejanie
- suszenie
- 2 tory
- 600 KLT /godz
Crates, KLT inserts and lids - through washing system.
Items to be cleaned: 600 pieces/h per lane
Maximum throughput width 300 mm
Maximum throughput height 650 mm
Contamination: Dust, mineral grease, mineral oil, metal chips
System description
The system and piping are made of high-quality stainless steel and therefore guarantee a long service life for the system.
The machine is a (2)-track chain conveyor machine.
The unique modular design allows an existing system to be expanded at any time, thus ensuring that the system does not become too small. If necessary, the system can grow with the company or with additional requirements.
Hot water heating: Heat exchanger in the washbasins for the heating circuit. Flow temperature recommended 90°C
Nozzle pipes: Screwed
Oil separator Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks.
Wash ware counter on both lanes.
System features: Stainless steel inlet module
- Stainless steel wash module 1
- Stainless steel washing module 2
- Stainless steel cold air blow-off
- Stainless steel hot air drying module
- Stainless steel drying module hot air
- Stainless steel outlet module
-transport system
- Drive with infinitely variable transport speed
-Heating tubular heat exchanger in the wash tanks
-Control cabinet with electrical control
- Assembly and cleaning doors on both sides of the system
- Heat insulation of the wash tanks and sound insulation on the fans.
Technical data:
Overall dimensions: Length: 12,350 mm
Width: 1,950 mm 2-track
Height: 2,800 mm Total height incl. fans.
Electrical power washing
Wash 1 pumps 7.50 kW 7.50 kW
Wash 2 pumps 7.50 kW 7.50 kW
Cold air blow-off 5.50 kW 5.50 kW
Hot air blow-off1 2X
Hot air blow-off2 2X
Hot air heating coil 4X
Drive X 0.55 kW 0.55 kW
Fume extraction fan 3.00 kW 3.00 kW
Voltage: 400 V
Frequency: 50 Hz
Bobq Sowi Nl Iszytcjwp
Protection class: IP 55
The system control unit is installed next to the machine.
The control cabinet contains the necessary installations for the function and monitoring of the overall system.
The device arrangement and cabling comply with the applicable VDE regulations.
The electrical supply line to the control cabinet must have an excess length of at least 2 m.
EMERGENCY STOP switches are fitted in the feed / discharge area.
A hot water supply of approx. 90°C is required to heat the washbasins.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of equipment is this?
This equipment is a container washing machine for KLT containers and various elements.
When was the machine manufactured?
The machine was manufactured in 2022.
What type of equipment is this?
This equipment is a container washing machine.
What types of containers can this container washer handle?
This container washer is designed for KLT containers and various elements.
When was this unit manufactured?
The unit was manufactured in 2022.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 2 |
| Last activity | Nov. 3, 2026 |
Crates, KLT inserts and lids - through-feed washing system.
washmachine KLT, crate washer
Automatyczna myjka do pojemnikow KLT, pralka tac
- mycie
- plukanie
- odolejanie
- suszenie
- 2 tory
- 600 KLT /godz
Crates, KLT inserts and lids - through washing system.
Items to be cleaned: 600 pieces/h per lane
Maximum throughput width 300 mm
Maximum throughput height 650 mm
Contamination: Dust, mineral grease, mineral oil, metal chips
System description
The system and piping are made of high-quality stainless steel and therefore guarantee a long service life for the system.
The machine is a (2)-track chain conveyor machine.
The unique modular design allows an existing system to be expanded at any time, thus ensuring that the system does not become too small. If necessary, the system can grow with the company or with additional requirements.
Hot water heating: Heat exchanger in the washbasins for the heating circuit. Flow temperature recommended 90°C
Nozzle pipes: Screwed
Oil separator Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks.
Wash ware counter on both lanes.
System features: Stainless steel inlet module
- Stainless steel wash module 1
- Stainless steel washing module 2
- Stainless steel cold air blow-off
- Stainless steel hot air drying module
- Stainless steel drying module hot air
- Stainless steel outlet module
-transport system
- Drive with infinitely variable transport speed
-Heating tubular heat exchanger in the wash tanks
-Control cabinet with electrical control
- Assembly and cleaning doors on both sides of the system
- Heat insulation of the wash tanks and sound insulation on the fans.
Technical data:
Overall dimensions: Length: 12,350 mm
Width: 1,950 mm 2-track
Height: 2,800 mm Total height incl. fans.
Electrical power washing
Wash 1 pumps 7.50 kW 7.50 kW
Wash 2 pumps 7.50 kW 7.50 kW
Cold air blow-off 5.50 kW 5.50 kW
Hot air blow-off1 2X
Hot air blow-off2 2X
Hot air heating coil 4X
Drive X 0.55 kW 0.55 kW
Fume extraction fan 3.00 kW 3.00 kW
Voltage: 400 V
Frequency: 50 Hz
Bobq Sowi Nl Iszytcjwp
Protection class: IP 55
The system control unit is installed next to the machine.
The control cabinet contains the necessary installations for the function and monitoring of the overall system.
The device arrangement and cabling comply with the applicable VDE regulations.
The electrical supply line to the control cabinet must have an excess length of at least 2 m.
EMERGENCY STOP switches are fitted in the feed / discharge area.
A hot water supply of approx. 90°C is required to heat the washbasins.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of equipment is this?
This equipment is a container washing machine for KLT containers and various elements.
When was the machine manufactured?
The machine was manufactured in 2022.
What type of equipment is this?
This equipment is a container washing machine.
What types of containers can this container washer handle?
This container washer is designed for KLT containers and various elements.
When was this unit manufactured?
The unit was manufactured in 2022.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Automatic through-feed washer for KLT containers (boxes, inserts, lids). Designed for washing, rinsing, degreasing, and drying KLT boxes and trays. Dual-track design, capacity: up to 600 pieces/hour per lane. Maximum passage width: 300 mm; maximum passage height: 650 mm. Types of contamination: dust, mineral grease, mineral oil, metal shavings. The system has a modular design allowing expansion of the setup at a later time. Materials and construction: piping and modules made of stainless steel. Machine equipped with a dual-track chain conveyor. Hot water heating is achieved by a heat exchanger in the washing tanks; recommended supply temperature approx. 90°C. Spray pipes are twisted. Oil separator: three-phase separator with pneumatic membrane pump and pre-filter on all tanks. Dish counters installed on both tracks. The system consists of: inlet module, washing module 1, washing module 2, cold air blower, two hot air drying modules, outlet module, and transport system. Additionally: drive with stepless speed control of transport, tubular heat exchanger in washing tanks, control cabinet with electrical control system, mounting and cleaning doors on both sides of the system, thermal insulation of washing tanks, and acoustic insulation of fans. Overall dimensions: length 12,350 mm, width 1,950 mm (2-track), total height with fans 2,800 mm. Power (selected items): washing pumps 1: 7.50 kW; washing pumps 2: 7.50 kW; cold air blower: 5.50 kW; drive X: 0.55 kW; exhaust fan: 3.00 kW. Hot air blower: 2x (as specified), hot air heating coil: 4x. Power supply: 400 V, 50 Hz. Protection rating: IP55. The system control unit is located beside the machine; control cabinet contains installations necessary for system operation and monitoring, wiring compliant with VDE regulations. Power cable to the control cabinet should be at least 2 m long. Emergency stops are installed in the loading/unloading area. Heating of the washing basins requires hot water supply at approximately 90°C.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 2 |
| Last activity | Nov. 3, 2026 |
Машина за измиване на KLT контейнери и различни елементи
Myčka kontejnerů KLT, myčka různých dílů
KLT-beholdervasker, vaskeanlæg til forskellige komponenter
KLT-Behälterwaschanlage, Waschanlage für verschiedene Teile
Πλυντήριο δοχείων KLT, πλυντήριο διαφόρων εξαρτημάτων
KLT Container Washer, Washer for Various Items
Lavadora de contenedores KLT; lavadora de diversos elementos
Laveuse de bacs KLT, installation de lavage de divers éléments
KLT perač spremnika; perač raznih predmeta
KLT-tartálymosó, különféle alkatrészek mosója
Lavatrice per contenitori KLT, impianto di lavaggio di vari componenti
KLT konteinerių plovimo įrenginys, skirtas įvairių detalių plovimui
KLT-bakkenwasmachine, wasinstallatie voor diverse onderdelen
Myjka pojemnikow KLT myjnia roznych elementow
Máquina de lavagem de contentores KLT e de diversos elementos
Mașină de spălat containere KLT, spălătorie pentru diverse elemente
Мойка контейнеров KLT, мойка различных деталей
KLT mašina za pranje kontejnera; mašina za pranje raznih predmeta
Tvättanläggning för KLT-behållare och olika komponenter
KLT konteyner yıkama makinesi, çeşitli parçaların yıkanması için
EN
- Languages
English (GB)