| Manufacturer | Motion Master |
|---|---|
| Model | SB-55 |
| Year | 1994 |
| Location | USA
|
Overview:
This listing is for a Motion Master SB-55 3-axis CNC router, manufactured in 1994, designed for woodworking, plastics, and composite materials. It is suitable for cutting plywood and vinyl sheets. The machine features a work area supported by a vacuum table, approximately 5 feet by 10 feet in size, providing a stable surface for material handling.
Key Specifications:
- Manufacturer: Motion Master
- Model: SB-55
- Year Manufactured: 1994
- Dimensions: Length 3302 mm, Width 3556 mm, Height 2133.6 mm
- Weight: Approximately 3176 kg
- Tool Changer: Automatic with 2 tool-holding positions
- Spindle: HSD motor spindle with asynchronous three-phase motor rated at 380 volts, capable of 7000 rpm
- Drive System: Ball screw mechanism
Control system details and power requirements are not fully specified. The machine does not include dust collection or vacuum pumps.
Condition:
The machine is offered post-uninstallation scheduled for November 17, 2025. No maintenance records or usage hours are available. Visible signs of wear are expected due to age. Prospective buyers should consider inspection and possible maintenance, especially regarding the ball screw drives and gantry alignment.
Logistics:
The machine is located in Conneautville, PA (ZIP 16406). Shipping arrangements are the buyer's responsibility. Storage can be provided for a limited time after uninstallation.
This CNC router is suitable for users seeking a robust machine for woodworking and related applications, with the understanding that some maintenance may be required due to its age and usage history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Overview: 3-axis CNC router for woodworking, plastics, and composites. Ideal for cutting plywood and vinyl. We’re upgrading our equipment, making this machine available post-uninstallation on November 17, 2025.
Key Specifications:
• Make & Model: Unsure of model, but think it is a MotionMaster SB-55 (3-axis)
• Year: ~1995–2000
• Work Area: 5' x 10' vacuum table
• Tool Changer: Automatic with two tool-holding slots
• Spindle: HSD Motor, likely 9HP
• Control: Fagor 8055 M, wired to an E-1400 Gateway PC running Windows 98 with Masterwood 310 and Bobcad 17 software (software license transfer status unclear).
• Drive System: Ball screw
• Power Requirements: Unknown
• Dust Collection and Vacuum Pumps: Not included
Condition & Maintenance:
• Fully operational for plywood sheet cutting at speeds up to 70%, showing general wear. Various machine covers secured with duct tape. Gantry may experience shaking at higher speeds after prolonged use, suggesting potential wear in the ball screw drives or alignment—recommended for inspection or maintenance.
• Maintenance History: No maintenance log available. Hours of use unknown but reliable for varied applications at reduced speeds.
Logistics:
• Dimensions: ~140”W x 130”L x 7' H (est.; ~6,000–8,000 lbs).
• Uninstallation Date: November 17, 2025
• Shipping: Buyer must provide. Machine available immediately after uninstallation on 11/17/2025; storage available for a few weeks if needed.
• Location: Conneautville, PA (ZIP 16406).
• Reason for Selling: Upgrading to new equipment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| motion-master-sb-55-p251024707_1.docx | Download |
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Oct. 24, 2025 |
Overview: 3-axis CNC router for woodworking, plastics, and composites. Ideal for cutting plywood and vinyl. We’re upgrading our equipment, making this machine available post-uninstallation on November 17, 2025.
Key Specifications:
• Make & Model: Unsure of model, but think it is a MotionMaster SB-55 (3-axis)
• Year: ~1995–2000
• Work Area: 5' x 10' vacuum table
• Tool Changer: Automatic with two tool-holding slots
• Spindle: HSD Motor, likely 9HP
• Control: Fagor 8055 M, wired to an E-1400 Gateway PC running Windows 98 with Masterwood 310 and Bobcad 17 software (software license transfer status unclear).
• Drive System: Ball screw
• Power Requirements: Unknown
• Dust Collection and Vacuum Pumps: Not included
Condition & Maintenance:
• Fully operational for plywood sheet cutting at speeds up to 70%, showing general wear. Various machine covers secured with duct tape. Gantry may experience shaking at higher speeds after prolonged use, suggesting potential wear in the ball screw drives or alignment—recommended for inspection or maintenance.
• Maintenance History: No maintenance log available. Hours of use unknown but reliable for varied applications at reduced speeds.
Logistics:
• Dimensions: ~140”W x 130”L x 7' H (est.; ~6,000–8,000 lbs).
• Uninstallation Date: November 17, 2025
• Shipping: Buyer must provide. Machine available immediately after uninstallation on 11/17/2025; storage available for a few weeks if needed.
• Location: Conneautville, PA (ZIP 16406).
• Reason for Selling: Upgrading to new equipment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview:
This listing is for a Motion Master SB-55 3-axis CNC router, manufactured in 1994, designed for woodworking, plastics, and composite materials. It is suitable for cutting plywood and vinyl sheets. The machine features a work area supported by a vacuum table, approximately 5 feet by 10 feet in size, providing a stable surface for material handling.
Key Specifications:
- Manufacturer: Motion Master
- Model: SB-55
- Year Manufactured: 1994
- Dimensions: Length 3302 mm, Width 3556 mm, Height 2133.6 mm
- Weight: Approximately 3176 kg
- Tool Changer: Automatic with 2 tool-holding positions
- Spindle: HSD motor spindle with asynchronous three-phase motor rated at 380 volts, capable of 7000 rpm
- Drive System: Ball screw mechanism
Control system details and power requirements are not fully specified. The machine does not include dust collection or vacuum pumps.
Condition:
The machine is offered post-uninstallation scheduled for November 17, 2025. No maintenance records or usage hours are available. Visible signs of wear are expected due to age. Prospective buyers should consider inspection and possible maintenance, especially regarding the ball screw drives and gantry alignment.
Logistics:
The machine is located in Conneautville, PA (ZIP 16406). Shipping arrangements are the buyer's responsibility. Storage can be provided for a limited time after uninstallation.
This CNC router is suitable for users seeking a robust machine for woodworking and related applications, with the understanding that some maintenance may be required due to its age and usage history.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | Oct. 24, 2025 |
CNC обработващ център за дърво Motion Master SB-55
CNC obráběcí centrum dřeva Motion Master SB-55
Motion Master SB-55 Træ CNC bearbejdningscenter
Motion Master SB-55 CNC-Holzbearbeitungszentrum
Κέντρο κατεργασίας ξύλου CNC Motion Master SB-55
Motion Master SB-55 Wood CNC machining center
Centro de mecanizado CNC para madera Motion Master SB-55
Centre d'usinage CNC pour le bois Motion Master SB-55
CNC obradni centar za drvo Motion Master SB-55
Motion Master SB-55 Fa CNC megmunkáló központ
Centro di lavoro CNC per legno Motion Master SB-55
Medienos CNC apdirbimo centras Motion Master SB-55
Motion Master SB-55 Hout CNC bewerkingscentrum
Centrum obróbcze CNC do drewna Motion Master SB-55
Centro de maquinação CNC para madeira Motion Master SB-55
Centru de prelucrare CNC pentru lemn Motion Master SB-55
Motion Master SB-55 Обрабатывающий центр с ЧПУ по дереву
CNC obradni centar za drvo Motion Master SB-55
Motion Master SB-55 CNC-bearbetningscenter för trä
Ahşap CNC işleme merkezi Motion Master SB-55
EN
- Languages
English (GB)